▾

Yamaha EMX5016CF BS Powered Mixing Desk

no reviews yet

Discontinued, this product can no longer be ordered.

No alternatives found

Yamaha EMX5016CF BS Powered Mixing Desk
Product no: 9000-0076-5173 Bax Music Warranty: This product comes with a 3-year warranty.

General

Equipped with 12 channels and a 500-Watt built-in stereo amplifier, the Yamaha EMX5016CF BS mixing desk is a great choice for bands. So that this powered mixer can be hooked up to your passive speakers, microphones, instruments and other gear, Yamaha have fitted a wide variety of both balanced and unbalanced inputs and outputs, including two footswitch inputs and 12V lamp input.

The EMX5016CF: Advanced Mixer with Built-In Amplifier

Since the EMX5016CF features individual compression per mono channel, high-pass filters, and a 3-band EQ on each channel, the audio can be tweaked in minute detail while the volume can be kept consistent or limited if needed. What's more, the Master section is home to a highly advanced digital 9-band graphic equalizer for further sonic optimisation, and Yamaha have a integrated an extensive effects section that can be used to enhance the sound with two effects per channel. Meanwhile, the on-board feedback suppressor actively counters those unwanted screeching sounds, while all of the microphone inputs offer +48V phantom power so you can freely plug in your condenser microphones.

Specifications

Product features

19 inches	19-inch rack mount (not included)
Number of auxiliaries	3 - 4
Number of microphone inputs	9 - 12
Number of mono channels	8
Number of stereo channels	4
Number of submasters	none
Compressor on the inputs	only on mono inputs
Equalizer	3-band parametric
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in effects	yes
Panning per channel	yes
Connector position	top and back
RMS power (4 ohms)	2x 500 W
RMS power (8 ohms)	2x 315 W
Type of mixer inputs	microphone input (XLR), balanced line input (TRS jack), unbalanced line input (TS jack), unbalanced line input (RCA)
Type of mixer outputs	unbalanced line output (TS jack), lockable speaker output
Mixer power	power cable
Volume control	faders + knobs

Weight and dimensions including packaging

Weight (incl. packaging)	14,5 kg
Dimensions (incl. packaging)	80,0 x 53,0 x 28,0 cm

Product specifications

Yamaha EMX5016CF mixer
Mixing Desk with Amplifier
mixer:
- channels: 8 Mono + 4 Stereo + 2 Return
- AUX: 4 (2x Effect Send)
- Main: stereo
- input functions: CH1-8: HPF, Compressor, 3-band mid-sweep PEQ Insert I/O; CH9-16: HPF, 3 band PEQ
- onboard processors: 2x SPX, 2x Digital 9-band GEQ, Feedback suppressor, Frequency response correction, Maximizer, YSProcessing
connections:
- mic inputs: 12
- phantom power: +48V DC, ON/OFF
- line inputs: 4x stereo
- control: 2x footswitch, lamp
on-board amplifiers:
- max. output power @ 4 Ohm: 500W per channel
- max. output power @ 8 Ohm: 320W per channel
- output selection: 500W, 200W, 75W; L/R, AUX1/MONO, AUX1/AUX2
THD: < 0.3%
frequency response: 20 Hz - 20 Hz
hum & noise:
- equivalent input : -128 dBu
- residual output: -68 dBu (speaker out); -95 dBu (line out)
protection:
- load: Power switch on/off mute, DC-fault (power supply shutdown/manual reset), Clip limiter (THD 1%; compression)
- amplifier: Thermal (heatsink temp 90 °C; output mute/auto reset), V limiter (RL 2 Ohms)
- power supply: Thermal (heatsink temp 100°C; power supply shutdown/manual reset)
power consumption: 500W
dimensions (W x D x H): 44.4 x 49.3 x 15.5cm
weight: 11 kg
included:
- user manual
- power cable