▾

DAP 4-Pin XLR GooseLight (White LEDs)

Discontinued, this product can no longer be ordered.

No alternatives found

DAP 4-Pin XLR GooseLight (White LEDs)
Product no: 9000-0055-9674 Bax Music Warranty: This product comes with a 3-year warranty.

General

The DAP GooseLight XLR features a flexible gooseneck construction and has been fitted with four white COB LEDs, a 4-pin XLR plug and an ever-useful on/off switch. Plug it into your mixer and get ready to support the show!

Tips or comments about this product

Please note: This gooseneck light is only compatible with mixing consoles and other gear equipped with a dedicated 4-pin XLR port.

Specifications

Product features

Sustainable product	not specified
Light source colour	cold white
Power supply via	4-pin XLR
Light source type	LED
Type of product	plug-in gooseneck

Weight and dimensions including packaging

Weight (incl. packaging)	300 gr
Dimensions (incl. packaging)	30,5 x 20,5 x 4,0 cm

Product specifications

4-pin XLR gooseneck light
4 COB LEDs
gooseneck length: 400mm
on/off switch
colour temperature: 6,000K to 6,500K
LED colour: white
power supply: 4-pin XLR, right-angled plug
pins: XLR pins 1 and 2 disconnection, pin 3 = earth, pin 4 = +12V

A review can no longer be written about this item

Martin W. June 1, 2021

Wrote the following about DAP 4-Pin XLR GooseLight (White LEDs)

Good quality light. Good price. The only downside is that it doesn’t work with my Allen & Heath MixWizard desk. I had to reverse the polarity by unsoldeing the red & black wires and swapping them over, then it worked fine. So please be aware of this before buying.

Reviews from other countries

Translate all reviews into English View original reviews

Roland December 29, 2021

Wrote the following about DAP 4-Pin XLR GooseLight (White LEDs)

Inderdaad voor de QU serie van Allen & Heath de rode en zwarte draad even los solderen en omdraaien. Dan doet tie het perfect.

Borg January 28, 2021

Wrote the following about DAP 4-Pin XLR GooseLight (White LEDs)

Had deze handige optie voor mijn X32 mixer al te lang uitgesteld!
Dacht eerst dat ik een miskoop had gedaan omdat de haakse connector 180° verkeerd leek te staan ...
Maar ... Dat was snel opgelost door twee schroefes los te vijzen en het binnenwerk 180° de draaien.
Gedaan met smartphone bijlichten in donkere situaties!
Voor zo'n scherpe prijs moet je deze optie dit echt niet uitstellen!