Laserworld CS-1000RGB MKII colour laser

General

If you've ever been to a professional large-scale event, you've probably witnessed an impressive laser show that adds a spectacular, professional touch. This Laserworld CS-1000RGB MKII does just that! It's a full-colour laser system with a total capacity of 1000 watts and is equipped with red, green, and blue lasers that can project not only colour but also figures and patterns in the air. The size of the patterns and the sensitivity of the built-in microphone (for sound-activated mode) are both adjustable by means of rotary knobs on the rear of the machine. This laser is a professional piece of equipment that can be used as either a standalone or via DMX and ILDA, which makes it suitable for just about any application.

Laserworld CS-1000RGB MKII: various modes

During the automatic and sound-activated programs, the CS-1000RGB randomly projects over 200 built-in laser patterns like tunnels, waves, circles, and more, in different colours and varying speeds. Besides these functions, the CS-1000RGB MKII also has a master/slave setting where it can be programmed to mimic another laser of the same type, or act as the main projector. When this laser is connected to a DMX, its speed, colours, and patterns can be changed using a lighting controller. For the most comprehensive control options, we recommend operating this laser via ILDA. You can design your entire laser show and work out every detail on a computer with laser software, then project it using the CS-1000RGB, which features an ILDA connection to enable a computer interface.

Applications

A colour laser like the CS-1000RGB MKII by Laserworld can be used in various locations, from mobile applications to a fixed installation in a club, for instance. This laser is built for professional use. On the front, there's a cover to protect the laser when it's not in use, and on the back, there's a mounting eyelet so that you can attach it securely. You can lock the laser with a key, which will prevent unauthorised users from activating it. The included bracket has two functions: firstly, it enables you to hang the laser securely from a grid or the ceiling, and secondly, it allows you to place it on a flat surface and aim the beams however you want.