▾

Audio Technica AT2022 stereo microphone

no reviews yet

Discontinued, this product can no longer be ordered.

No alternatives found

Not sure if the Audio Technica AT2022 stereo microphone is for you? Do a Choice Check. Start Choice Checker

Audio Technica AT2022 stereo microphone
Product no: 9000-0006-1970 Bax Music Warranty: This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

General

If you are on the road often and want to create stereo recordings on location or need a complete stereo image from one microphone - the Audio Technica AT2022 is the microphone for you! It is equipped with two microphone capsules, which are used in an X/Y setup to achieve a stereo image without using two separate pencil microphones. The AT2022 has a switchable roll-off (up to 150 Hz) and is delivered including a windscreen, microphone clip, battery and carrying bag.

AT2022: battery-powered

A narrow (90-degree angle) as well as a wide (120-degree) stereo image can be selected. Make sure that you DON'T use a phantom power supply in combination with this microphone: the unidirectional condenser capsules are powered by an (accessory) AA battery. The cable features an XLRF connector on the microphone side and a 3.5mm mini jack connector on the other, to connect it to recorders or other devices. For lively stereo recordings on location, the AT2022 truly is a smart choice.

Tips or comments about this product

Please note: the AT2022 is only suited for battery-powered use. XLR cables with phantom power can damage the microphone.

Specifications

Product features

Microphone sensitivity (dBV/PA)	-41
Microphone impedance	200-249 ohms
Low-cut filter	yes
Maximum SPL	120 dB - 129 dB
Maximum frequency	20 - 20.9 kHz
Microphone accessories	microphone clip, windshield, bag / box
Minimum frequency	20 - 21 Hz
Pad switch	no
Polar pattern	stereo
Stereo	yes, stereo microphone
Interchangable capsules	no