Based on more than 21,240 customer reviews

QSC 4x AD-S8T speakers + 2x GXD8 amplifiers + AD-S112SW

5 / 5
QSC 4x AD-S8T speakers + 2x GXD8 amplifiers + AD-S112SW

Discontinued

This product can no longer be ordered

Specifications

QSC AD-S8T installation speaker
4x QSC AD-S8T installation speaker
The QSC AD-S8T installation speaker is suitable for 70 and 100-volt systems as well as standard audio installations. It has an IP-54 rating, which means it's splash-resistant!

Product features

Mid driver/woofer diameter
8 inches
Tweeter diameter
1 inch
Suitable for outdoors
Yes
Sensitivity
90 dB
Weight per speaker
11 kg
Installation speaker / 100 V
Yes
Colour
Black
Maximum SPL
110 dB - 119 dB
Maximum frequency
20 - 20.9 kHz
Minimum frequency
50 - 59 Hz
Nominal impedance
8 ohms
Peak power in watts
350 - 499 watts
RMS capacity in watts
200 - 349 W
Set
No

Weight and dimensions including packaging

Weight
14,5 kg
Dimensions
73,0 x 36,0 x 36,0 cm

Product specifications

  • installation speaker
  • capacity: 200 RMS, 400W program
  • woofer: 8 in (2-inch voice coil)
  • tweeter: 1-inch compression driver
  • dispersion angle: 105°
  • frequency range: 55 Hz - 20 kHz
  • max. SPL: 119 dB
  • impedance: 8 ohms
  • taps:
    • 100 Volt: 60, 30, 15, 7.5 W
    • 70 Volt: 60, 30, 15, 7.5 W
  • connector: Euroblock
  • housing: ABS plastic
  • IP rating: 54
  • dimensions: 440 x 254 x 251 mm
  • weight: 14.5 kg
  • includes: X-mount bracket, Euroblock connector, input cover
QSC GXD 8 4500-Watt Amplifier with Built-In Processor
2x QSC GXD 8 4500-Watt Amplifier with Built-In Processor
The GSC GXD 8 amplifier with built-in security circuitry is made for big sound systems and can deliver up to 4500 Watts.

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
No
Sustainable product
Not specified
Input
Jack (6.3 mm) + XLR
Built-in filter
HPF, LPF
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor
Yes
Cooling
Ventilator
RMS power (4 ohms) per channel
1200 - 1299 watts
RMS power (at 8 Ohms) per channel
800 - 899 Watts
Amplifier class
D
Amplifier output
Locking speaker connector, wire clamps
Equipped with crossover
No

Weight and dimensions including packaging

Weight
7,8 kg
Dimensions
60,0 x 37,0 x 15,0 cm

Product specifications

  • amplifier with DSP processor
  • power:
  • 8 ohms, dynamic: 2x 1500 Watts
  • 4 ohms, dynamic: 2x 2250 Watts
  • 8 ohms, continuous: 2x 800 Watts
  • 4 ohms, continuous: 2x 1200 Watts
  • distortion: <1% THD, 1 kHz at full capacity
  • signal-to-noise ratio: 100 dB
  • input sensitivity: 1.2 Vrms
  • voltage gain (8 Ohms): 33.5 dB
  • amp type: D class
  • frequency response: 20 Hz - 20 kHz, +0.7 / -0.8 dB
  • dynamic headroom: 2.73 dB
  • damping factor >100
  • input impedance: 20 kOhms balanced, 10k unbalanced
  • maximum input signal: +23.5 dBu
  • input connectors: XLR and jack on each channel
  • output connectors: 2x NL4 (Neutrik SpeakOn)
  • security: short circuit, open circuit, thermal, RF protection
  • DSP functions: hi-pass filter, lo-pass filter, 4-band EQ, limiter, delay
  • dimensions: 89 x 483 x 259 mm
  • weight: 6.0 kg
QSC AD-S112SW passive subwoofer
1x QSC AD-S112SW passive subwoofer
The QSC AD-S112Sw passive installation subwoofer is suitable for restaurants, shops, and a variety of audio-visual applications. It's perfect in combination with the QSC AcousticDesign range.

Product features

6.3mm TRS connector
No
Mid driver/woofer diameter
12 inches
Wire terminals
Yes
Sensitivity
90 dB
Weight per speaker
13 kg
Maximum SPL
110 dB - 119 dB
Maximum subwoofer frequency
140 Hz
Minimum frequency
35 - 39 Hz
Nominal impedance
8 ohms
Peak power in watts
200 - 349 watts
RMS capacity in watts
350 - 499 W
Locking speaker connectors
Yes

Weight and dimensions including packaging

Weight
15,0 kg

Product specifications

  • passive installation subwoofer
  • perfect with AD series speakers
  • rugged, lightweight ABS housing
  • aluminium powder-coated grille
  • turbulent flow reduction port
  • mounting bracket and M10 rigging points
  • IEC60529 IP-54 rating: splash and dust resistant
  • frequency range: 30 – 135 Hz
  • capacity: 300W, 50V (RMS)
  • sensitivity: 90 dB SPL
  • dispersion angle: 75°
  • max. continuous SPL: 115 dB
  • max. peak SPL: 121 dB
  • impedance: 8 ohms
  • tweeter: 1.4 voice coil compression driver
  • woofer: 12-inch cone
  • input connector: Euroblock with parallel output
  • housing material: ABS polymer
  • grille material: aluminium, powder coated
  • colour: black
  • suitable for indoor and outdoor use
  • weight: 13.2 kg
  • dimensions: 594 x 354 x 323 mm
  • includes:
    • suspension bracket
    • Euroblock connector
    • panel cover

No alternatives found

Specifications

QSC AD-S8T installation speaker
4x QSC AD-S8T installation speaker
The QSC AD-S8T installation speaker is suitable for 70 and 100-volt systems as well as standard audio installations. It has an IP-54 rating, which means it's splash-resistant!

Product features

Mid driver/woofer diameter
8 inches
Tweeter diameter
1 inch
Suitable for outdoors
Yes
Sensitivity
90 dB
Weight per speaker
11 kg
Installation speaker / 100 V
Yes
Colour
Black
Maximum SPL
110 dB - 119 dB
Maximum frequency
20 - 20.9 kHz
Minimum frequency
50 - 59 Hz
Nominal impedance
8 ohms
Peak power in watts
350 - 499 watts
RMS capacity in watts
200 - 349 W
Set
No

Weight and dimensions including packaging

Weight
14,5 kg
Dimensions
73,0 x 36,0 x 36,0 cm

Product specifications

  • installation speaker
  • capacity: 200 RMS, 400W program
  • woofer: 8 in (2-inch voice coil)
  • tweeter: 1-inch compression driver
  • dispersion angle: 105°
  • frequency range: 55 Hz - 20 kHz
  • max. SPL: 119 dB
  • impedance: 8 ohms
  • taps:
    • 100 Volt: 60, 30, 15, 7.5 W
    • 70 Volt: 60, 30, 15, 7.5 W
  • connector: Euroblock
  • housing: ABS plastic
  • IP rating: 54
  • dimensions: 440 x 254 x 251 mm
  • weight: 14.5 kg
  • includes: X-mount bracket, Euroblock connector, input cover
QSC GXD 8 4500-Watt Amplifier with Built-In Processor
2x QSC GXD 8 4500-Watt Amplifier with Built-In Processor
The GSC GXD 8 amplifier with built-in security circuitry is made for big sound systems and can deliver up to 4500 Watts.

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
No
Sustainable product
Not specified
Input
Jack (6.3 mm) + XLR
Built-in filter
HPF, LPF
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor
Yes
Cooling
Ventilator
RMS power (4 ohms) per channel
1200 - 1299 watts
RMS power (at 8 Ohms) per channel
800 - 899 Watts
Amplifier class
D
Amplifier output
Locking speaker connector, wire clamps
Equipped with crossover
No

Weight and dimensions including packaging

Weight
7,8 kg
Dimensions
60,0 x 37,0 x 15,0 cm

Product specifications

  • amplifier with DSP processor
  • power:
  • 8 ohms, dynamic: 2x 1500 Watts
  • 4 ohms, dynamic: 2x 2250 Watts
  • 8 ohms, continuous: 2x 800 Watts
  • 4 ohms, continuous: 2x 1200 Watts
  • distortion: <1% THD, 1 kHz at full capacity
  • signal-to-noise ratio: 100 dB
  • input sensitivity: 1.2 Vrms
  • voltage gain (8 Ohms): 33.5 dB
  • amp type: D class
  • frequency response: 20 Hz - 20 kHz, +0.7 / -0.8 dB
  • dynamic headroom: 2.73 dB
  • damping factor >100
  • input impedance: 20 kOhms balanced, 10k unbalanced
  • maximum input signal: +23.5 dBu
  • input connectors: XLR and jack on each channel
  • output connectors: 2x NL4 (Neutrik SpeakOn)
  • security: short circuit, open circuit, thermal, RF protection
  • DSP functions: hi-pass filter, lo-pass filter, 4-band EQ, limiter, delay
  • dimensions: 89 x 483 x 259 mm
  • weight: 6.0 kg
QSC AD-S112SW passive subwoofer
1x QSC AD-S112SW passive subwoofer
The QSC AD-S112Sw passive installation subwoofer is suitable for restaurants, shops, and a variety of audio-visual applications. It's perfect in combination with the QSC AcousticDesign range.

Product features

6.3mm TRS connector
No
Mid driver/woofer diameter
12 inches
Wire terminals
Yes
Sensitivity
90 dB
Weight per speaker
13 kg
Maximum SPL
110 dB - 119 dB
Maximum subwoofer frequency
140 Hz
Minimum frequency
35 - 39 Hz
Nominal impedance
8 ohms
Peak power in watts
200 - 349 watts
RMS capacity in watts
350 - 499 W
Locking speaker connectors
Yes

Weight and dimensions including packaging

Weight
15,0 kg

Product specifications

  • passive installation subwoofer
  • perfect with AD series speakers
  • rugged, lightweight ABS housing
  • aluminium powder-coated grille
  • turbulent flow reduction port
  • mounting bracket and M10 rigging points
  • IEC60529 IP-54 rating: splash and dust resistant
  • frequency range: 30 – 135 Hz
  • capacity: 300W, 50V (RMS)
  • sensitivity: 90 dB SPL
  • dispersion angle: 75°
  • max. continuous SPL: 115 dB
  • max. peak SPL: 121 dB
  • impedance: 8 ohms
  • tweeter: 1.4 voice coil compression driver
  • woofer: 12-inch cone
  • input connector: Euroblock with parallel output
  • housing material: ABS polymer
  • grille material: aluminium, powder coated
  • colour: black
  • suitable for indoor and outdoor use
  • weight: 13.2 kg
  • dimensions: 594 x 354 x 323 mm
  • includes:
    • suspension bracket
    • Euroblock connector
    • panel cover

Product information

Product no: 9000-0017-3810

General

The AD-S8T set by QSC was specifically designed for professional use and is suitable for use as a live PA or for background music in an establishment. The set consists of four AD-S8T speakers, two GXD8 amplifiers and one AD-S112SW subwoofer. The AD-S8T is a first-rate speaker with a maximum SPL of 119 dB. It's equipped with an 8-inch woofer and a 1-inch compression driver. In terms of looks, the classy black speaker has a sleek appearance with a minimalistic design.

GXD8 amplifiers

The reliable QSC GXD8 power amplifier is capable of an impressive 4500-watt Class-D output capacity. This, in combination with an ultra-flexible DTP, makes the GXD8 an essential part of your setup. You don't need to invest in an extra laptop or rack modules to adjust the settings; the system can be configured directly on the GDX8 itself!

AD-S112SW sub

Finally, we come to the AD-S112SW subwoofer, which is also part of QSC's AcousticDesign range. This 12-inch subwoofer is the perfect companion to the AcousticDesign full-range speakers, and this complete set will provide you and your audience with excellent, reliable audio for years to come!

QSC AD-S8T installation speaker This product comes with a 3-year warranty.

QSC GXD 8 4500-Watt Amplifier with Built-In Processor This product comes with a 6-year warranty when you register it with QSC within 30 days of purchase. If the product is not registered it has a 3-year warranty.

QSC AD-S112SW passive subwoofer This product comes with a 3-year warranty.

Reviews (4)

5.0
4 reviews

Rating

5 stars 4 4 stars 0 3 stars 0 2 stars 0 1 star 0
A review can no longer be written about this item
5 / 5

QSC GXD 8 4500-Watt Amplifier with Built-In Processor

for the price, usually around £650, you get 1200 watts per channel into 4 ohms. The build quality seems very good, the performance is excellent, and they'll happily drive a single E18SW (800W rms) per channel to high output levels. I have now used these for a number of events in the last couple of years and they have performed flawlessly. The built in DSP is very capable, and useful if you have more than one type of speaker in use. Being switch-mode, they're light, which is nice when you have seven of them in a flightcase. They seem to be built to a slightly better standard than the GXD4 - one of which I've had fail.



The only negative thing I can think of is that they lack air filters behind the grilles so after a summer of events they become quite dusty inside. Routine maintenance should include taking the lids off and cleaning them every so often.
 | 

Reviews from other countries

5 / 5

QSC GXD 8 4500-Watt Amplifier with Built-In Processor

Wat een degelijke versterker!
Zeer licht in gewicht en dan toch zat vermogen, heel blij mee en de DSP werkt ook zeer fijn en duidelijk.
Scheelt enorm veel sjouw werk.
Dankzij de goede limiters ook heerlijk te gebruiken als floor monitorversterker.
 | 
This review was automatically translated from Dutch.
5 / 5

QSC GXD 8 4500-Watt Amplifier with Built-In Processor

Super produit, reçu très rapidement, site très sérieux le top je vous le conseille !
 | 
This review was automatically translated from French.
5 / 5

QSC GXD 8 4500-Watt Amplifier with Built-In Processor

Is dit product te gebruiken voor de Hk audio linear 5 f115 passieve top ?
en is er software voor apple om deze versterker te gebruiken, zo ja waar kan ik deze vinden ?

Bedankt.
 | 
This review was automatically translated from Dutch.

Videos

Downloads

Compare your gear (1/10)