With this clamp you can place your Magic FX shooters in a stable position. You'll prevent a cannon from coming loose, thus preventing dangerous situations.
If you want to connect a standard European CO2 tank to Magic FX's CO2 shooters, you'll need this durable 90-degree connector.
Be sure your Magic FX special effect machines are firmly fixed. On the MFX0303 Baseplate II you can firmly mount the Powershot II, CO2JET II, SPARXTAR and PSYCO2JET so they can go all the way!
With the Magic FX CO2LAUNCHER Reload Tube, you load your confetti, serpentines and T-shirts into the Magic FX CO2LAUNCHER. You get one as standard with your CO2Launcher, but of course it's handy to have more.
If you want to load confetti or serpentines into your MagicFC CO2Launcher, it starts with these Lifting Cores. These are the discs you put in your Loading Tube first. The confetti or serpentines follow next.
With the Magic FX CO2Launcher Cap Stickers you can mark the Loading Tubes of your CO2Launcher. This way, you always know which Loading Tube you pick up, and what you put in it: confetti, serpentines or a T-shirt after all.
MagicFX Quick Trigger Clamp M10, for attaching your Stage Flame, Power Jet or Dominator to a truss. Maximum load capacity 100kg.
MagicFX's MFX1105 is a 2-metre CO2 high-pressure hose for connecting gas cylinders to the four-way distribution block.
The MFX1103 by Magic FX allows you to quickly and securely connect a CO2 bottle to a gas hose, so that you can safely create excellent CO2 effects.
The MFX1104 from Magic FX is a manual vent valve that allows you to take the pressure off your CO2 system. This is necessary to disconnect your system or replace a bottle.
With the MFX1110 from Magic FX, you can safely and quickly make right-angle turns in the CO2 pipe. With this coupling in your range, the placement of your CO2 effects is a lot more flexible. With the quick connector, you quickly make the connection
With the MFX1111 Combiner, you connect two CO2 bottles to 1 CO2 Jet. This allows you to use your Jet frequently during the show without having to change bottles. You also get more efficiency out of your effect.
Use the Magic FX MFX1112 Splitter to connect two CO2-Jets up to a single bottle of CO2 to complete an efficient setup.
With this thick hose by Magic FX you can connect all your CO2 effects. Made of a strong material to prevent leaking and features quick-release connectors.
With this CO2 backpack from Magic FX, you can create crazy special effects as an entertainer. You are now no longer dependent on large and unwieldy CO2 bottles but simply take it with you on your back.
Power your Magic FX CO2 Jet with this CO2 hose. It fits every European CO2 gas tank by means of an MFX1103. With quick-release connectors.
With this CO2 hose, you can supply Magic FX's CO2 Jet with its power. The hose fits any European CO2 gas cylinder using an MFX1103. Disconnecting hoses is child's play thanks to the quick connectors.
If you want to use Power Drops with a certain backdrop, but don't want to make holes in it, you can use these practical hangers.
The Magic FX FX-Blower Truss Bracket is a recommended accessory for the FX-Blower. With this bracket, you can mount said blower to truss. Especially in theatres and on film sets, this will be common.
This base plate allows for extra safe placement of up to four shooters, and it's incredibly sturdy.
Filters
Filters