The Grado Timbre Platinum-3 1mV cartridge features a jarrah body, an aluminium cantilever and diamond-pointed needle.
The Ortofon Stylus CC MKII Club has been specifically designed for the Ortofon Concorde MKII Club cartridge.
Ortofon's 2M Stylus Guards are designed to protect the needle of the Ortofon 2M cartridge and, here, come in a pack of ten.
The Ortofon Concorde MKII Twin Mix is a set that consists of two Concorde Mix MKII cartridges with pre-installed spherical styli that have an output voltage of 6 mV and a frequency response of 20 - 20, 000 Hz and are suitable for all DJs.
Pre-mounted on a black Ortofon SH-4 Headshell, the Ortofon OM PRO S stylus is an excellent pick for the entry-level vinyl devotee.
The Ortofon VNL DANCE Premounted is a High-Output cartridge for use by professional DJs, pre-assembled on Ortofon's new SH-2 headshell.
Exclusively designed to fit Ortofon Concorde MKII phono cartridges, the Ortofon Fingerlift is easily installed to give your turntable a more customised touch or to replace an old and knackered Fingerlift.
Zomo's Headshell is a suitable pickup for any SME tonearm. It's made of aluminium and works with all 1/2-inch cartridges.
While the average elliptical stylus will last for around 300 hours of playback, it can be quickly and easily replaced with the Audio Technica AT-VMN95E replacement needle.
This replacement stylus fits both the Ortofon DJ S OM and the Ortofon DJ S Concorde cartridges.
Ortofon Rubber Rings parts for Concorde MkI/MkII. You can use these rings to avoid attaching the cartridge too tightly to the tonearm. You place the ring on the base of the cartridge mount.
The Grado Timbre Sonata-3 1mV cartridge features a jarrah body, an aluminium cantilever and diamond-pointed needle.
The Audio Technica AT-ART9XI is the flagship model in the range of the maker's moving coil cartridges. Made using high-quality parts and materials, this premium cartridge features a special line-contact stylus.
The Audio Technica VM530EN cartridge has been outfitted with a naked elliptical needle, resulting in rich sound reproduction and tight groove-tracking.
The Grado Prestige ME+ concerns the upgraded version of the MC+, equipped with the Flux Bridger generator system. This means fewer coil windings, making the cartridge insensitive to tonearm capacitance.
The Grado Timbre Master-3 4mV cartridge features a jarrah body, a boron cantilever and diamond-pointed needle.
Your elliptical naked stylus will last about 300 hours. If it reaches that point, there's no man about it. With the Audio Technica AT-VMN95EN replacement stylus, you'll solve the problem in no time.
The Audio Technica AT-81 CP Dual Moving Magnet with bonded conical needle is a cartridge for a linear tracking turntable.
Ortofon's Nightclub MKII cartridge was designed for intense use in clubs. This stylus provides you with a great replacement once the original is worn down.
The ergonomic and tight, solid design combined with a wider arm give the Ortofon SH-4 Universal Headshell a light and controlled feel so the needle can be placed with surgical accuracy.
Pre-equipped with an elliptical needle, the Audio Technica VM520EB stereo cartridge has been set up for boosted accuracy, resulting in detailed audio reproduction.
This stylus fits both the Nightclub MK1 and MK2 cartridge. It features a neon-yellow design and a sturdy aluminium bearing for optimal stability.
The Audio Technica AT-85 EP Dual Moving Magnet cartridge with bonded elliptical needle is a cartridge for a linear tracking turntable from brands such as Technicus, Pioneer or Hitachi.
The Ortofon Cocoon Stylus is a replacement needle for the Ortofon Cocoon Twin Set Limited Edition.
To get straight to work with your vinyl records, you have the Audio Technica VM-530EN/H dual Moving Magnet stereo cartridge with a naked diamond elliptical needle.
This stylus is a spare part for the Concorde MkII Elite. This is the HiFi-grade 'Nude Elliptical diamond' stylus that lets you enjoy powerful, detailed sound reproduction.
This stylus for Ortofon Night Club Concorde and Ortofon Night Club OM cartridges fits both the MK1 and MK2 models. It features a spherical diamond tip.
As a DJ, you need to have a good stylus in the house, and you have that with the Audio Technica AT-XP5. It produces a solid sound due to its output of 5.5 mV and further features a glued elliptical needle.
Aimed at DJs and comprised of an all-round cartridge and the VNL II stylus, the Ortofon VNL Single Pack strikes the perfect balance between sound quality and output.
This two-pack of Ortofon screws and nuts can be used to mount an Ortofon OM cartridge.
Looking at a broken cartridge grip? Not to worry, this two-pack of finger lifts for the Ortofon Concorde MKI offers the perfect quick fix.
The Audio Technica AT-XP5/H is a cartridge with an elliptical stylus for the vinyl DJ that excels in hi-fi sound in addition to standard features.
The Audio Technica AT-XP3/H is a cartridge with a tapered stylus for the vinyl DJ that excels in hi-fi sound in addition to standard features.
Combining a micro-linear stylus with a naked, right-angled shank, the Audio Technica AT-OC9XML dual moving coil cartridge offers superb tracking, accurate treble reproduction and an extremely flat frequency response.
The Audio Technica AT-VM95SP/H cartridge includes a headshell and a spherical needle. It's purpose-made for 78RPM standard-play records and offers excellent tracking performance and sound reproduction to match.
Your conical 3 mil stylus for 78 rpm records will last about 300 hours. If that's the case, there's no need to worry. With the Audio Technica AT-VMN95E replacement stylus, you'll solve the problem in no time.
The Ortofon Digitrack stylus was designed for the Digitrack Concorde and Digitrack OM cartridges, the world's first cartridges that were specially developed for timecode vinyl.
The second model to drop from the VNL range, the Ortofon Stylus VNL II is fully compatible with the VNL cartridge, has been fully calibrated for scratching and back-spins, and set up to serve professional DJs.
The Audio Technica VM510CB is the most economical VM model of Audio Technica's high-end V-Magnet cartridges. This cartridge comes with a spherical stylus mounted on an aluminium cantilever.
The AT50ANV is the best cartridge that Audio Technica serve up right now. Backed up by over 50 years of experience, the AT50ANV offers unprecedented performance and bang-on sound.
The Grado Timbre Master-3 1mV cartridge features a jarrah body, a boron cantilever and diamond-pointed needle.
Made for DJ-focused turntables, the high-quality Grado Prestige DJ-100i comes fitted with three-part OTL cantilever technology backed up by oxygen-free copper wiring and more.
