Celestion TSQ2145 Bass loudspeaker, 8 Ohm
Celestion
Bargain Buy
Specifications
Product features
- Sustainable product
- Not specified
- Type of speaker
- Subwoofer
- Minimum frequency
- 30 - 34 Hz
- Maximum frequency
- < 1 kHz
- RMS capacity in watts
- 1,500 - 3,000 W
- Peak power in watts
- 1,500 - 3,000 watts
- Sensitivity
- 97 dB
- Nominal impedance
- 8 ohms
- Type of magnet
- Neodymium
- Weight per speaker
- 13 kg
- Installation depth
- 240 - 249 mm
Weight and dimensions including packaging
- Weight
- 13,0 kg
- Dimensions
- 54,0 x 50,0 x 25,0 cm
Product specifications
- 3600W continuous load capacity
- 97dB sensitivity
- 4.5 inch voice coil diameter
- nominal diameter: 530mm (21 inches)
- power: 1800W
- sensitivity: 97dB
- frequency range: 30 - 1,000Hz
- chassis material: cast aluminium
- magnet type: neodymium
- voice coil diameter: 115mm (4.5 inches)
- voice coil material: round copper
- former material: glass fibre
- cone material: glass loaded cellulose, waterproof coating on front and back
- surround material: triple roll, fabric sealed
- suspension: triple, polysiloxane-coated laminate
- gap height: 12mm (0.46 inch)
- vc winding height: 36mm (1.42 inch)
- sd: 1661.9cm² (257.9in²)
- fs: 30Hz
- mms: 435.2g (15.35oz)
- qms: 8.393
- qes: 0.359
- qts: 0.344
- re: 5.0Ω
- vas: 253.8L (8.96ft³)
- bi: 33.8Tm
- cms: 0.065mm/N
- rms: 9.77kg/s
- le (at 1kHz): 3.91mH
- xmax: 15mm (0.59 inch)
- xmech: 40mm (1.57 inch)
- efficiency η: 1.9%
- overall diameter: 541mm (21.3 inches)
- depth: 250mm (9.84 inch)
- cut-out diameter: 505mm (19.88 inch)
- number of mounting holes: 8
- mounting hole dimensions: 8.5x10mm (0.33x0.39 inch)
- mounting hole pcd: 525-528mm (20.61-20.79 inch)
- flange & gasket thickness: 17mm (0.67 inch)
- weight per unit: 13.8kg (30.4lb)
- dimensions per pack: 575mm x 575mm x 280mm (22.6 inches x 22.6 inches x 11 inches)
- weight per pack: 14.5kg (32lb)
Recommended price £650
-19%
£529
incl. 20% VAT
Online stock status:
Delivery time unknown
£26.45 one-time fee
x4
Celestion TSQ2145 + 4x Penn Elcom
- Recommended price
- £533.88
- Now as combination for
- £533.00
- You save
- £0.88
Delivery time unknown
Celestion TSQ2145 + Penn Elcom
- Recommended price
- £538.95
- Now as combination for
- £538.00
- You save
- £0.95
Delivery time unknown
Specifications
Product features
- Sustainable product
- Not specified
- Type of speaker
- Subwoofer
- Minimum frequency
- 30 - 34 Hz
- Maximum frequency
- < 1 kHz
- RMS capacity in watts
- 1,500 - 3,000 W
- Peak power in watts
- 1,500 - 3,000 watts
- Sensitivity
- 97 dB
- Nominal impedance
- 8 ohms
- Type of magnet
- Neodymium
- Weight per speaker
- 13 kg
- Installation depth
- 240 - 249 mm
Weight and dimensions including packaging
- Weight
- 13,0 kg
- Dimensions
- 54,0 x 50,0 x 25,0 cm
Product specifications
- 3600W continuous load capacity
- 97dB sensitivity
- 4.5 inch voice coil diameter
- nominal diameter: 530mm (21 inches)
- power: 1800W
- sensitivity: 97dB
- frequency range: 30 - 1,000Hz
- chassis material: cast aluminium
- magnet type: neodymium
- voice coil diameter: 115mm (4.5 inches)
- voice coil material: round copper
- former material: glass fibre
- cone material: glass loaded cellulose, waterproof coating on front and back
- surround material: triple roll, fabric sealed
- suspension: triple, polysiloxane-coated laminate
- gap height: 12mm (0.46 inch)
- vc winding height: 36mm (1.42 inch)
- sd: 1661.9cm² (257.9in²)
- fs: 30Hz
- mms: 435.2g (15.35oz)
- qms: 8.393
- qes: 0.359
- qts: 0.344
- re: 5.0Ω
- vas: 253.8L (8.96ft³)
- bi: 33.8Tm
- cms: 0.065mm/N
- rms: 9.77kg/s
- le (at 1kHz): 3.91mH
- xmax: 15mm (0.59 inch)
- xmech: 40mm (1.57 inch)
- efficiency η: 1.9%
- overall diameter: 541mm (21.3 inches)
- depth: 250mm (9.84 inch)
- cut-out diameter: 505mm (19.88 inch)
- number of mounting holes: 8
- mounting hole dimensions: 8.5x10mm (0.33x0.39 inch)
- mounting hole pcd: 525-528mm (20.61-20.79 inch)
- flange & gasket thickness: 17mm (0.67 inch)
- weight per unit: 13.8kg (30.4lb)
- dimensions per pack: 575mm x 575mm x 280mm (22.6 inches x 22.6 inches x 11 inches)
- weight per pack: 14.5kg (32lb)
Product information
Product no: 9000-0147-8959
General
The Celestion TSQ2145 is a powerful 21-inch neodymium bass speaker that provides impressive low-end reproduction and excellent heat management. Thanks to the advanced ventilation system, the voice coil remains up to 80°C cooler than other speakers in this class. This improves stability, ensures longevity and prevents performance degradation. The speaker has an impressive output of 3600W and is perfect for use in professional sound systems where powerful, clear bass is required.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
There are no reviews for this product yet.
Downloads
Other people also bought
-
PopularRecommended price £1.75 £1.31In stock Order before 10:00pm = receive it on Monday
-
PopularRecommended price £1.84 £1.22In stock Order before 10:00pm = receive it on Monday
-
Popular -55%Recommended price £22.15 £9.95In stock Order before 10:00pm = receive it on Monday
-
Popular -36%Recommended price £189 £121In stock Order before 10:00pm = receive it on Monday (free)
Package deal
Celestion TSQ2145 + 4x Penn Elcom
Product no: 9000-0147-8961
x4
- 1 x Celestion TSQ2145 Bass loudspeaker, 8 Ohm £529.00
- 4 x Penn Elcom Rubber Foot with Steel Ring, 38 x 20mm £4.88
- Recommended price
- £533.88
- Now as combination for
- £533.00
- You save
- £0.88
Delivery time unknown
Celestion TSQ2145 + Penn Elcom
Product no: 9000-0147-8962
- 1 x Celestion TSQ2145 Bass loudspeaker, 8 Ohm £529.00
- 1 x Penn Elcom Carpet for boxes black (per 1.83 square metre) £9.95
- Recommended price
- £538.95
- Now as combination for
- £538.00
- You save
- £0.95
Delivery time unknown
Celestion TSQ2145 + Penn Elcom MG-8305
Product no: 9000-0147-8963
- 1 x Celestion TSQ2145 Bass loudspeaker, 8 Ohm £529
- 1 x Penn Elcom MG-8305 Speaker Foam (5mm x 200 x 100cm) £27
- Recommended price
- £556
- Now as combination for
- £553
- You save
- £3
Delivery time unknown
