JB systems AVM-2 digital amplifier module 500W RMS

General

If you like to work with JB Systems' Vibe series, you will benefit from getting your hands on the AVM-2! This amplifier module can easily be screwed into the Vibe 15 or 30 MKII. This way, you can turn your passive speakers into an active one. Thanks to its low weight, you will hardly notice it being there! In other words: leave your amp rack at home!

AVM-2 and its applications

The AVM-2 is compatible with the Vibe 15 and Vibe 30. When it's mounted into the Vibe 15, it produces no less than 500 watts RMS! A great advantage of this unit is that you can connect another passive speaker via the lockable connector. In that case, the AVM-2 module provides 850 watts RMS, distributed over the two speakers.
When it's mounted into the Vibe 30, the internal construction lets the module work at 4 ohms, providing a single Vibe 30 MKII cabinet with 850 watts RMS!

Furthermore, the module features settings for the crossover point, which starts coming in handy if you add Vibe 18S subwoofers to the mix! The low frequencies will then provided by the subs, while the middle and highs are taken care of by the Vibe 15 or 30 cabinets. An optimal frequency distribution so!

• Please note: the mentioned power at 4 ohms is only applicable when two Vibe 15 speakers (shared power) or one Vibe 30 speaker are used!
• Please note: when mounting the AVM-2 into the Vibe 30 MKII, you cannot connect an additional speaker!