Based on more than 21,240 customer reviews

JB systems AMP 100.2 2x110W RMS 4-ohm amplifier

Discontinued, this product can no longer be ordered.

No alternatives found
JB systems AMP 100.2 2x110W RMS 4-ohm amplifier
Product no: W-11117 Bax Music Warranty: This product comes with a 3-year warranty.

General

The new AMP series by JB Systems is perfect for smaller (satellite) speakers that don't need a huge amount of power to function properly. As they are highly compact (only 1 U), you can install multiple amps in one rack (be it for fixed or mobile applications)!

Furthermore, the units feature all manner of options for optimal user-friendliness. One of these options is the soft start function, which ensures that you'll not be bothered by electric problems if you switch on all amps in one go! The fans are all temperature-controlled, so that annoying noises aren't an issue, when the sound volume and required power are low in your application. A peak limiter prevents overloading and distortion of the signal, so that you will always enjoy optimal sound quality.

This AMP 100.2 amplifier provides enough power for satellite speakers or installation speakers. It produces 100 watts RMS at 4 ohms per channel and can also operate in bridged mode for a subwoofer, to which it can provide 200 watts at 8 ohms. Perfect for installation applications where intelligibility is more important than sound pressure.

Specifications

Product features

19-inch rack size 1U
2-ohm compatible no
Number of amplifier channels 2
Audio loop output yes
Bridge mode yes
Input jack (6.3 mm), XLR
Built-in filter HPF
Built-in protection overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor no
Cooling ventilator
RMS power (4 ohms) per channel 100 - 149 watts
RMS power (at 8 Ohms) per channel 50 - 99 Watts
Amplifier class AB
Amplifier output locking speaker connector
Equipped with crossover no

Weight and dimensions including packaging

Weight (incl. packaging) 2,1 kg
Dimensions (incl. packaging) 60,0 x 31,0 x 9,0 cm

Product specifications

  • powerful 2-channel amplifier
  • 19-inch installation unit
  • only 1U high!
  • lightweight design
  • fitted with soft start function
  • 3 operating modes: stereo, mono and bridged
  • efficient temperature-controlled fan cooling
  • peak limiter prevents signal distortion and overloading
  • switchable 75 Hz, -24dB low-cut filter
  • adjustable input volume: 0.775 V ~ 1.0 V ~ 1.44 V
  • ground lift switch
  • protection against: DC errors + overheating + overloading + short-circuiting
  • balanced XLR - inputs and jack plug outputs (daisy chaining)
  • 3 lockable speaker connectors: left + right bridged
  • frequency range: 20 - 20,000 Hz
  • signal/noise ratio (A-weighted) > 100 dB
  • power stereo 4 ohms: 2x 100 W
  • power stereo 8 ohms: 2x 70 W
  • power bridge 8 ohms: 1x 200 W
  • dimensions: 483 x 235 x 44 mm (19 inch, 1 U)
  • weight: 4.5 kg
A review can no longer be written about this item

Reviews from other countries

Translate all reviews into English

JB systems AMP 100.2 2x110W RMS 4-ohm amplifier

Wrote the following about JB systems AMP 100.2 2x110W RMS 4-ohm amplifier
Zeer goede versterker, maar erg lawaaierig. Vandaar de 4 sterren.
JB systems AMP 100.2 2x110W RMS 4-ohm amplifier

Wrote the following about JB systems AMP 100.2 2x110W RMS 4-ohm amplifier
Goed geluid, maar erg lawaaierige koeling. Dus wel geschikt voor live optredens, maar niet voor thuis.

Alternative products by other brands

Search all products in category Amplifiers
Compare your gear (1/10)