JB systems DSPA-1000 amplifier
JB systems
Discontinued
This product can no longer be ordered
Specifications
Product features
- 19-inch rack size
- 2U
- 2-ohm compatible
- Yes
- Number of amplifier channels
- 2
- Audio loop output
- Yes
- Bridge mode
- Yes
- Input
- Jack (6.3 mm), XLR
- Built-in filter
- HPF, LPF
- Built-in protection
- Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
- Built-in DSP processor
- Yes
- Cooling
- Ventilator
- RMS power (4 ohms) per channel
- 500 - 599 watts
- RMS power (at 8 Ohms) per channel
- 300 - 349 Watts
- Amplifier class
- D
- Amplifier output
- Locking speaker connector, wire clamps
- Equipped with crossover
- No
Weight and dimensions including packaging
- Weight
- 5,0 kg
- Dimensions
- 57,0 x 45,0 x 17,0 cm
Product specifications
- professional amplifier
- 19-inch rack-mountable, 2 U
- lightweight design
- double Class D amplifier module
- temperature-controlled fan cooling
- operating modes: stereo / bridge / input Y
- built-in DSP section with HPF, LPF, 8-band EQ, limiters, delays and crossover
- crossover: Linkwitz-Riley, 24 dB/oct, 50 Hz - 3.15 kHz
- peak limiter prevents signal distortion and overloading
- protection against the negative effects of DC, overheating, overloading and short-circuiting
- frequency range: 20 - 20,000 Hz
- signal/noise ratio > 100 dB
- power stereo bridged 2 ohms: 2x 750 W
- power stereo 4 ohms: 2x 500 W
- power stereo bridged 8 ohms: 2x 300 W
- power stereo bridged 8 ohms: 1x 1000 W
- power stereo bridged 4 ohms: 1x 1,500 W
- dimensions: 482 x 88 x 280 mm
- weight: 4.9 kg
Connectors:
- audio inputs: 2x XLR connector / 2x 6.3mm jack connector (link out option)
- speaker outputs: 2x screw terminals / 2x lockable speaker connectors
No alternatives found
Specifications
Product features
- 19-inch rack size
- 2U
- 2-ohm compatible
- Yes
- Number of amplifier channels
- 2
- Audio loop output
- Yes
- Bridge mode
- Yes
- Input
- Jack (6.3 mm), XLR
- Built-in filter
- HPF, LPF
- Built-in protection
- Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
- Built-in DSP processor
- Yes
- Cooling
- Ventilator
- RMS power (4 ohms) per channel
- 500 - 599 watts
- RMS power (at 8 Ohms) per channel
- 300 - 349 Watts
- Amplifier class
- D
- Amplifier output
- Locking speaker connector, wire clamps
- Equipped with crossover
- No
Weight and dimensions including packaging
- Weight
- 5,0 kg
- Dimensions
- 57,0 x 45,0 x 17,0 cm
Product specifications
- professional amplifier
- 19-inch rack-mountable, 2 U
- lightweight design
- double Class D amplifier module
- temperature-controlled fan cooling
- operating modes: stereo / bridge / input Y
- built-in DSP section with HPF, LPF, 8-band EQ, limiters, delays and crossover
- crossover: Linkwitz-Riley, 24 dB/oct, 50 Hz - 3.15 kHz
- peak limiter prevents signal distortion and overloading
- protection against the negative effects of DC, overheating, overloading and short-circuiting
- frequency range: 20 - 20,000 Hz
- signal/noise ratio > 100 dB
- power stereo bridged 2 ohms: 2x 750 W
- power stereo 4 ohms: 2x 500 W
- power stereo bridged 8 ohms: 2x 300 W
- power stereo bridged 8 ohms: 1x 1000 W
- power stereo bridged 4 ohms: 1x 1,500 W
- dimensions: 482 x 88 x 280 mm
- weight: 4.9 kg
Connectors:
- audio inputs: 2x XLR connector / 2x 6.3mm jack connector (link out option)
- speaker outputs: 2x screw terminals / 2x lockable speaker connectors
Product information
Product no: 9000-0008-2993
General
Modern times require modern amplification solutions. With the DSPA-1000, JB Systems are providing a very attractive amplifier that combines a lot of power with limited heat production and a very efficient class D amplifier. The amplifier operates effortlessly at 2 ohms and achieves a power of 2x 750 watts RMS. The housing of the DSPA-1000 is rack-ready so that it can be used in fixed installations as well as live racks.
DSPA-1000: full-on DSP section
One look at the front panel of the DSPA-1000 and you know this model does more than just amplify! It features a complete built-in DSP section. In it you will find an HPF (40 - 125 Hz) and an LPF (6.3 kHz - 20 kHz), an 8-band equalizer, two limiters, two delays and a crossover. This way, you'll be able to perfectly fine-tune your PA in any space and the power of the amp can be optimally used.
Applications
What kind of speaker requirements do you have? The DSPA-1000 can drive two satellite speakers (stereo setup), a satellite speaker and a subwoofer (mono setup) and a single satellite speaker (mono). In any case, the amp is protected against overloading, short-circuiting, DC and overheating - so you needn't worry too much about safety! The DSPA-1000 only weighs 5 kg, is modern, efficient (Class D) and extremely versatile.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
Videos
Downloads
Alternative products by other brands
Search all products in category Amplifiers-
Bargain Buy -34%Recommended price £590 £391In stock Order now = receive it on Tuesday (free)
-
Popular -39%Recommended price £694 £422In stock Order now = receive it on Tuesday (free)
-
Popular -47%Recommended price £474 £249In stock Order now = receive it on Tuesday (free)
-
Popular -47%Recommended price £565 £299In stock Order now = receive it on Tuesday (free)
