JB systems DSPA-1500 amplifier
JB systems
Discontinued
This product can no longer be ordered
Specifications
Product features
- 19-inch rack size
- 2U
- 2-ohm compatible
- Yes
- Number of amplifier channels
- 2
- Audio loop output
- Yes
- Bridge mode
- Yes
- Input
- Jack (6.3 mm), XLR
- Built-in filter
- HPF, LPF
- Built-in protection
- Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
- Built-in DSP processor
- Yes
- Cooling
- Ventilator
- RMS power (4 ohms) per channel
- 700 - 799 watts
- RMS power (at 8 Ohms) per channel
- 400 - 449 Watts
- Amplifier class
- D
- Amplifier output
- Locking speaker connector, wire clamps
- Equipped with crossover
- No
Weight and dimensions including packaging
- Weight
- 5,5 kg
- Dimensions
- 57,0 x 46,0 x 17,0 cm
Product specifications
- professional amplifier
- 19-inch rack-mountable, 2 U
- lightweight design
- double Class D amplifier module
- temperature-controlled fan cooling
- operating modes: stereo / bridge / input Y
- built-in DSP section with HPF, LPF, 8-band EQ, limiters, delays and crossover
- crossover: Linkwitz-Riley, 24 dB/oct, 50 Hz - 3.15 kHz
- peak limiter prevents signal distortion and overloading
- protection against the negative effects of DC, overheating, overloading and short-circuiting
- frequency range: 20 - 20,000 Hz
- signal/noise ratio > 100 dB
- power stereo bridged 2 ohms: 2x 1,200 W
- power stereo 4 ohms: 2x 750 W
- power stereo bridged 8 ohms: 2x 440 W
- power stereo bridged 8 ohms: 1x 1,500 W
- power stereo bridged 4 ohms: 1x 2,400 W
- dimensions: 482 x 88 x 280 mm
- weight: 5.2 kg
Connectors:
- audio inputs: 2x XLR connector / 2x 6.3mm jack connector (link out option)
- speaker outputs: 2x screw terminals / 2x lockable speaker connectors
No alternatives found
Specifications
Product features
- 19-inch rack size
- 2U
- 2-ohm compatible
- Yes
- Number of amplifier channels
- 2
- Audio loop output
- Yes
- Bridge mode
- Yes
- Input
- Jack (6.3 mm), XLR
- Built-in filter
- HPF, LPF
- Built-in protection
- Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
- Built-in DSP processor
- Yes
- Cooling
- Ventilator
- RMS power (4 ohms) per channel
- 700 - 799 watts
- RMS power (at 8 Ohms) per channel
- 400 - 449 Watts
- Amplifier class
- D
- Amplifier output
- Locking speaker connector, wire clamps
- Equipped with crossover
- No
Weight and dimensions including packaging
- Weight
- 5,5 kg
- Dimensions
- 57,0 x 46,0 x 17,0 cm
Product specifications
- professional amplifier
- 19-inch rack-mountable, 2 U
- lightweight design
- double Class D amplifier module
- temperature-controlled fan cooling
- operating modes: stereo / bridge / input Y
- built-in DSP section with HPF, LPF, 8-band EQ, limiters, delays and crossover
- crossover: Linkwitz-Riley, 24 dB/oct, 50 Hz - 3.15 kHz
- peak limiter prevents signal distortion and overloading
- protection against the negative effects of DC, overheating, overloading and short-circuiting
- frequency range: 20 - 20,000 Hz
- signal/noise ratio > 100 dB
- power stereo bridged 2 ohms: 2x 1,200 W
- power stereo 4 ohms: 2x 750 W
- power stereo bridged 8 ohms: 2x 440 W
- power stereo bridged 8 ohms: 1x 1,500 W
- power stereo bridged 4 ohms: 1x 2,400 W
- dimensions: 482 x 88 x 280 mm
- weight: 5.2 kg
Connectors:
- audio inputs: 2x XLR connector / 2x 6.3mm jack connector (link out option)
- speaker outputs: 2x screw terminals / 2x lockable speaker connectors
Product information
Product no: 9000-0008-3054
General
The JB Systems DSPA-1500 may only weigh 5 kilos, but it is anything but a lightweight! This class D audio amp model produces 2x 1,200 watts at 2 ohms RMS, at 8 ohms it still produces 2x 440 watts. Bridged mode is also an option and it results in 2,400 watts at 4 ohms of mono power. Thanks to the Class D technology, the amp is highly efficient and it produces very little heat. Truly, it proves that efficiency and high power output can go hand in hand!
DSPA-1500: full-on DSP section
You might have guessed it from the name: the DSPA-1500 features a DSP section, and not just any: an HPF and LPF, 8-band parametric EQ, two limiters, two delays and crossover (Linkwitz-Riley) and three switchable operating modes. At the rear you will find connectors for audio-in (XLR, jack) and speaker out (lockable connectors and wire clamps).
Applications
You can use the DSPA-1500 for nearly any audio application - from fixed installations in restaurants and bars, hotels and other public locations, to live use by DJs and for live PA purposes! The practical rack size, limited heat generation and impressive power make the DSPA-1500 a friend to all! Whether you connect two satellite speakers, one satellite and a sub or a single speaker to it, the DSPA-1500 will do the job! Its smart DSP engine lets your speakers sound like they should in every room.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
Videos
Downloads
Alternative products by other brands
Search all products in category Amplifiers-
Bargain Buy -46%Recommended price £1,408 £759In stock Order now = receive it on Tuesday (free)
-
Popular -15%Recommended price £848 £719In stock Order now = receive it on Tuesday (free)
-
Popular -47%Recommended price £474 £249In stock Order now = receive it on Tuesday (free)
-
Popular -47%Recommended price £565 £299In stock Order now = receive it on Tuesday (free)
