Based on more than 21,240 customer reviews

Behringer NX1000D Amplifier with DSP Processor

no reviews yet
Behringer NX1000D Amplifier with DSP Processor

Discontinued

This product can no longer be ordered

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
Yes
Sustainable product
Not specified
Input
Jack (6.3 mm) + XLR, USB
Built-in filter
HPF, LPF, band pass
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor
Yes
Cooling
Ventilator
RMS power (4 ohms) per channel
Not specified
RMS power (at 8 Ohms) per channel
Not specified
Amplifier class
D
Amplifier output
Locking speaker connector
Equipped with crossover
No

Weight and dimensions including packaging

Weight
4,4 kg
Dimensions
56,0 x 31,0 x 17,0 cm

Product specifications

  • Behringer NX1000D
    • class D amplifier
    • peak power: 2x 160 Watts (8 Ohms), 2x 300 Watts (4 Ohms)
    • bridged peak power: 620 Watts (8 Ohms), 1000 Watts (4 Ohms)
    • frequency range: 20Hz - 20kHz
    • THD: <0.01%
    • S/N ratio: >100dB
    • dampening factor: >155 dB @ 8 Ohms
  • connectors:
    • 2x XLR/TRS combo (input CH A/B)
    • 2x lockable speaker connection (output CH A/B)
    • power cable
  • controls
    • 2x volume (CH A/B)
    • power
    • crossover (LF/bandpass/HF, rear)
    • mode (bridge/stereo/mono)
  • dimensions: 94 x 483 x 231mm
  • weight: 3.4kg

Alternative items

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
Yes
Sustainable product
Not specified
Input
Jack (6.3 mm) + XLR, USB
Built-in filter
HPF, LPF, band pass
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor
Yes
Cooling
Ventilator
RMS power (4 ohms) per channel
Not specified
RMS power (at 8 Ohms) per channel
Not specified
Amplifier class
D
Amplifier output
Locking speaker connector
Equipped with crossover
No

Weight and dimensions including packaging

Weight
4,4 kg
Dimensions
56,0 x 31,0 x 17,0 cm

Product specifications

  • Behringer NX1000D
    • class D amplifier
    • peak power: 2x 160 Watts (8 Ohms), 2x 300 Watts (4 Ohms)
    • bridged peak power: 620 Watts (8 Ohms), 1000 Watts (4 Ohms)
    • frequency range: 20Hz - 20kHz
    • THD: <0.01%
    • S/N ratio: >100dB
    • dampening factor: >155 dB @ 8 Ohms
  • connectors:
    • 2x XLR/TRS combo (input CH A/B)
    • 2x lockable speaker connection (output CH A/B)
    • power cable
  • controls
    • 2x volume (CH A/B)
    • power
    • crossover (LF/bandpass/HF, rear)
    • mode (bridge/stereo/mono)
  • dimensions: 94 x 483 x 231mm
  • weight: 3.4kg
bax-shop.uk | B-stock

Product information

Product no: 9000-0046-0413

General

The Behringer NX1000D Class-D, two-channel amplifier is lightweight yet fully able to push no less 160 Watts of power at 8 Ohms. Inside, you'll find a wealth of modern perks like zero-attack limiters, SmartSense, and DSP. The limiters assure you of system overload protection, even at maximum output, while the SmartSense feature ensures a flat frequency range at every impedance. This amp also offers three modes: mono, stereo, or bridged. In bridged mode and with 4 Ohm access, you can open up an enormous peak power of 620 Watts. The built-in DSP section, meanwhile, provides a delay, crossover, and an 8-band parametric equaliser, and to finish, the NX1000D can be controlled or monitored via USB, and the NX Edit software enables you to save custom presets.

Bax Music Warranty This product comes with a 3-year warranty when you register it with Behringer within 90 days of purchase. If the product is not registered it has a 2-year warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Downloads

Alternative products by other brands

Search all products in category Amplifiers
Compare your gear (1/10)
Clear Compare