My account

Devine MX-2000 2-Channel PA Power Amplifier (2x 1000W at 8 Ohms)

5 / 5

Devine MX-2000 2-Channel PA Power Amplifier (2x 1000W at 8 Ohms)

Discontinued

This product can no longer be ordered

Specifications

Product features

19-inch rack size: 2U
2-ohm compatible: No
Number of amplifier channels: 2
Audio loop output: No
Bridge mode: Yes
Sustainable product: Not specified
Input: RCA, RCA + XLR, XLR
Built-in filter: None
Built-in protection: Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor: No
Cooling: Ventilator
RMS power (4 ohms) per channel: 1300 - 1399 watts
RMS power (at 8 Ohms) per channel: 1000 - 1099 Watts
Amplifier class: H
Amplifier output: Locking speaker connector, wire clamps
Equipped with crossover: No

Weight and dimensions including packaging

Weight: 16,6 kg
Dimensions: 53,5 x 49,0 x 14,0 cm

Product specifications

Devine power amplifier
series: MX
clean control panel with front ventilation panel
temperature-controlled fan cooling system with front-to-back cooling
magnetically suspended fans for increased lifespan and reduced noise
various models available to meet different demands in terms of power capacity and functions
19-inch rack compatibility (2U)
soft start (avoids power spikes, especially when switching on multiple amplifiers at once)
equipped with protection circuits and systems (clip limiter, DC output protection, power surge protection, etc)
front panel LED status indicators
supports standard stereo and bridge set-ups
adjustable signal input (stereo/parallel/bridge)
various professional inputs and outputs for optimum audio and eased installation
high-quality circuits and components for optimum power generation
power (RMS):
- 2x 1000W at 8 Ohms
- 2x 1350W at 4 Ohms
- bridged at 8 Ohm: 1x 2000W
class: H
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 0.775V
input impedance: 20 kOhm / 10 kOhm
damping factor: >200
S/N ratio: >100 dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminal
Ground Lift function
dimensions (W x D x H): 48.2 x 37 x 8.8cm (2 U/HE)
weight: 17.5 kg

No alternatives found

Specifications

Product features

19-inch rack size: 2U
2-ohm compatible: No
Number of amplifier channels: 2
Audio loop output: No
Bridge mode: Yes
Sustainable product: Not specified
Input: RCA, RCA + XLR, XLR
Built-in filter: None
Built-in protection: Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor: No
Cooling: Ventilator
RMS power (4 ohms) per channel: 1300 - 1399 watts
RMS power (at 8 Ohms) per channel: 1000 - 1099 Watts
Amplifier class: H
Amplifier output: Locking speaker connector, wire clamps
Equipped with crossover: No

Weight and dimensions including packaging

Weight: 16,6 kg
Dimensions: 53,5 x 49,0 x 14,0 cm

Product specifications

Devine power amplifier
series: MX
clean control panel with front ventilation panel
temperature-controlled fan cooling system with front-to-back cooling
magnetically suspended fans for increased lifespan and reduced noise
various models available to meet different demands in terms of power capacity and functions
19-inch rack compatibility (2U)
soft start (avoids power spikes, especially when switching on multiple amplifiers at once)
equipped with protection circuits and systems (clip limiter, DC output protection, power surge protection, etc)
front panel LED status indicators
supports standard stereo and bridge set-ups
adjustable signal input (stereo/parallel/bridge)
various professional inputs and outputs for optimum audio and eased installation
high-quality circuits and components for optimum power generation
power (RMS):
- 2x 1000W at 8 Ohms
- 2x 1350W at 4 Ohms
- bridged at 8 Ohm: 1x 2000W
class: H
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 0.775V
input impedance: 20 kOhm / 10 kOhm
damping factor: >200
S/N ratio: >100 dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminal
Ground Lift function
dimensions (W x D x H): 48.2 x 37 x 8.8cm (2 U/HE)
weight: 17.5 kg

Product information

Product no: 9000-0095-1243

General

If masses of power is what you need, then the Devine MX-2000 is what you'll want. This forceful power amplifier delivers a 2x 1000W output at 8 Ohms and even kicks things up to 2x 1350W at 4 Ohms. Perfect for when you need to turn the volume up to eleven, this beefy amplifier is kept cool by a dynamic two-fan cooling system where a slow speed is maintained in standby, but as the amp is dialled in to deliver higher output and starts generating more heat, the speeed increases automatically.

The MX-2000: Built-In Tech

Boasting a simple-yet-effective and serviceable design, the MX-2000 is equipped with a massive ring-core transformer that passes on the power it generates to a set of transistors that have been mounted on a double heatsink that runs from the front to the back of the amp, where hot air is forced out by the active, temperature-controlled cooling system. To accommodate fixed installations as well as mobile rigs, the MX-2000 has been outfitted with various inputs and outputs, including traditional wire terminals, locking speaker ports and a locking blue power input. Also, there's no glass tube fuse that will need replacing in case of operational issues - a simple push of the reset button is all it takes to get the amp up and running again.

Controls & Installation

The MX-2000 features various built-in protection circuits to counter overload, output short-circuit and overheating. Weighing in at 17.5kg, this Devine amplifier has a 2U 19-inch housing that can be neatly installed in a flight case on wheels or slotted in a sturdy rack. Home to a handful of LED indicators, a pair of volume controls and an on/off switch, the ventilated front panel has been kept clean to keep controlling the unit as fuss-free as possible.

Tips or comments about this product

Please note: This Devine amplifier is compatible with passive speakers with the following specifications:
- Passive full-range speakers, power rating: +/- 666W at 8 Ohm
- Passive subwoofers, power rating: +/- 500W at 8 Ohm

Service promise

Bax Music Warranty This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Reviews (3)

5.0

3 reviews

Rating

5 stars 3 4 stars 0 3 stars 0 2 stars 0 1 star 0

A review can no longer be written about this item

Reviews from other countries

5 / 5