JB systems AMP 150.4 Amplifier
JB systems
Discontinued
This product can no longer be ordered
Specifications
Product features
- 19-inch rack size
- 1U
- 2-ohm compatible
- No
- Number of amplifier channels
- 4
- Audio loop output
- No
- Bridge mode
- Yes
- Input
- Jack (6.3 mm), XLR
- Built-in filter
- None
- Built-in protection
- Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
- Built-in DSP processor
- No
- Cooling
- Convection
- RMS power (4 ohms) per channel
- 150 - 199 watts
- RMS power (at 8 Ohms) per channel
- 50 - 99 Watts
- Amplifier class
- D
- Amplifier output
- Locking speaker connector, wire clamps
- Equipped with crossover
- No
Weight and dimensions including packaging
- Weight
- 6,0 kg
- Dimensions
- 57,0 x 42,0 x 14,0 cm
Product specifications
- powerful 4-channel amplifier
- 19-inch rack-mountable, 1U
- lightweight design
- double Class D amplifier module
- efficient design, no fans required
- stereo/bridge switchable
- peak limiter prevents signal distortion and overloading
- protection against the negative effects of DC, overheating, overloading and short-circuiting
- frequency range: 20 - 20,000 Hz
- signal/noise ratio (A-weighted) > 90 dB
- power stereo 4 ohms: 4x 150 W
- power stereo 8 ohms: 4x 80 W
- power stereo bridged 8 ohms: 2x 300 W
- dimensions: 4838 x 44 x 330 mm
- weight: 5.2 kg
Connectors:
- audio inputs: 4x XLR/TRS combo
- speaker outputs: 4x screw terminals / 2x lockable speaker connectors
No alternatives found
Specifications
Product features
- 19-inch rack size
- 1U
- 2-ohm compatible
- No
- Number of amplifier channels
- 4
- Audio loop output
- No
- Bridge mode
- Yes
- Input
- Jack (6.3 mm), XLR
- Built-in filter
- None
- Built-in protection
- Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
- Built-in DSP processor
- No
- Cooling
- Convection
- RMS power (4 ohms) per channel
- 150 - 199 watts
- RMS power (at 8 Ohms) per channel
- 50 - 99 Watts
- Amplifier class
- D
- Amplifier output
- Locking speaker connector, wire clamps
- Equipped with crossover
- No
Weight and dimensions including packaging
- Weight
- 6,0 kg
- Dimensions
- 57,0 x 42,0 x 14,0 cm
Product specifications
- powerful 4-channel amplifier
- 19-inch rack-mountable, 1U
- lightweight design
- double Class D amplifier module
- efficient design, no fans required
- stereo/bridge switchable
- peak limiter prevents signal distortion and overloading
- protection against the negative effects of DC, overheating, overloading and short-circuiting
- frequency range: 20 - 20,000 Hz
- signal/noise ratio (A-weighted) > 90 dB
- power stereo 4 ohms: 4x 150 W
- power stereo 8 ohms: 4x 80 W
- power stereo bridged 8 ohms: 2x 300 W
- dimensions: 4838 x 44 x 330 mm
- weight: 5.2 kg
Connectors:
- audio inputs: 4x XLR/TRS combo
- speaker outputs: 4x screw terminals / 2x lockable speaker connectors
Product information
Product no: 9000-0008-2750
General
The JB Systems AMP 150.4 is a 4-channel model that's a part of the professionally designed AMP series of amps. It offers 4x 150 watts at 4 ohms and has a bridge function. Despite that, it is only 1 U high and very quiet, as there are no cooling fans on board, making it an ideal choice for use in a 19-inch fixed or live rack.
AMP 150.4: Class D
The power of the AMP 150.4 lies in two highly efficient Class D amps. The amps emit very little heat, rendering cooling fans unnecessary and allowing for a highly compact housing. Of course, the unit is adequately protected against the adverse effects of direct currents, overheating, overloading and short-circuiting, so that you will be able to enjoy the AMP 150.4 for years to come!
Applications
The AMP 150.4 is first and foremost a very multifunctional unit. At the rear you will find switches that can switch the output between stereo and bridge mode (even both at the same time). A great advantage of two separate amps is that you can go for all kinds of setups - two full-range speakers, four or two full-rangers and a sub, whatever you want! You can either use wire clamp terminals or lockable speaker connectors for your cabling. Double stereo inputs come in the shape of four combo XLR connectors. Compact, efficient and versatile - the AMP 150.4 by JB Systems!
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
Alternative products by other brands
Search all products in category Amplifiers-
Popular -50%Recommended price £1,220 £610In stock Order now = receive it on Tuesday (free)
-
🔥HOT & NEW Bargain Buy -14%Recommended price £465 £399In stock Order now = receive it on Tuesday (free)
-
Popular -47%Recommended price £565 £299In stock Order now = receive it on Tuesday (free)
-
🔥HOT & NEW Bargain Buy -14%Recommended price £406 £348In stock Order now = receive it on Tuesday (free)
