LD Systems XS 200 1U Class D power amplifier

LD Systems XS 200 1U Class D power amplifier
Product no: 9000-0152-9386 Bax Music Warranty: This product comes with a 3-year warranty.

General

The LD Systems XS 200 is an ultra-compact 1U Class D power amplifier for situations where space and weight count. With 2x 100 watts at 4 ohms (and a wide range from 20 Hz to 20 kHz), it is suitable for mobile sets, fixed installations as well as home use. As no fan is needed, it remains quiet in use. In addition, the XS200 is protected against short circuit, DC, overheat and overload, among others, and you can switch on limiter and ground lift via switches.

Specifications

Product features

Sustainable product	not specified
RMS power (4 ohms) per channel	100 - 149 watts
RMS power (at 8 Ohms) per channel	50 - 99 Watts
2-ohm compatible	not specified
Amplifier class	D
Number of amplifier channels	2
19-inch rack size	1U
Amplifier output	locking speaker connector, wire clamps
Input	jack (6.3 mm) + XLR + RCA
Equipped with crossover	no
Built-in DSP processor	no
Cooling	convection
Bridge mode	yes
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Audio loop output	not specified
Built-in filter	not specified

Weight and dimensions including packaging

Weight (incl. packaging)	3,0 kg
Dimensions (incl. packaging)	48,2 x 24,4 x 4,4 cm

Product specifications

quantity: 1x LD Systems XS200 power amplifier
amplifier class: class D
output power (peak): 200 W
output power (RMS): 100 W
frequency response (±0.5 dB, rel. avg): 20 - 20,000 Hz
protections: limiter, soft-start, short circuit, overheating, overload, direct current
number of line inputs: 3
inputs: XLR, RCA and 6.3 mm jack
line-in connector type: 6.3 mm jack TRS female
input gain: 24 - 30 dB
number of speaker outputs: 2
speaker output connection type: speaker terminal 2-pole
outputs: speakon-compatible sockets and screw terminals
number of output channels: 2
bridged output channels number: 1
total RMS power: 4 Ω: 200 W | 8 Ω: 100 W
total peak power: 8 Ω: 200 W
operating voltage: 115 V AC - 230 V AC / 50 - 60 Hz
power supply type: switched-mode power supply (SMPS)
rated power consumption: 240 W
mains connector: IEC C14 plug male
cooling: no fan required (passive cooling)
housing: steel sheet