▾

SynQ SE-3000 Class-TD Amplifier

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
Reviews (3)
Downloads (6)

SynQ SE-3000 Class-TD Amplifier
Product no: 9000-0072-6438 Bax Music Warranty: This product comes with a 3-year warranty.

General

The SynQ SE-3000 is a professional solution for the most extensive and demanding passive speaker systems. This hard-working amplifier is able to deliver up to 2,000 Watts per channel at 2 Ohms but can also be dropped in bridge mode for 3,000 Watts of single-channel output at 8 Ohms, or 1x 4,000W at 4 Ohms. Outfitted with excellent limiters and safety circuits, this class-TD amp is fully prepped for clubs, theatres, portable rigs, fixed PA systems and more.

Specifications

Product features

19-inch rack size	2U
2-ohm compatible	yes
Number of amplifier channels	2
Audio loop output	yes
Bridge mode	yes
Sustainable product	not specified
Input	jack (6.3 mm stereo), XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor	no
Cooling	ventilator
RMS power (4 ohms) per channel	1500 - 1599 watts
RMS power (at 8 Ohms) per channel	1000 - 1099 Watts
Amplifier class	TD
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	10,8 kg
Dimensions (incl. packaging)	57,5 x 50,0 x 15,5 cm

Product specifications

SynQ SE-3000 amplifier
class: TD
19-inch: 2U
LCD display
power capacity (stereo):
- 2x 1,000W RMS @ 8 Ω
- 2x 1,500W RMS @ 4 Ω
- 2x 2,000W RMS @ 2 Ω
power capacity (bridged):
- 1x 3,000W RMS @ 8 Ω
- 1x 4,000W RMS @ 4 Ω
built-in safeties:
- inaudible signal + power limiter
- overload protection
- short circuit protection
- DC protection
- thermal protection
- AC/VHF protection
- soft start
- and more
two FAN modes:
- silent mode for minimum fan noise
- power mode for maximum active cooling capacity
three operating modes: stereo, bridge and mono (linked inputs)
input sensitivity: 0.75V / 1.0V / 1.5V
connections:
- 2x XLR/TRS balanced inputs
- 2x XLR-M Link outputs
- 2x SpeakON outputs
dimensions: 48.2 x 36.5 x 8.8cm
weight: 10.06 kg

A review can no longer be written about this item

Reviews from other countries

Translate all reviews into English View original reviews

Bert Tromp May 29, 2022

Wrote the following about SynQ SE-3000 Class-TD Amplifier

Ik gebruik al jaren Synq-versterkers! ik heb de PE900 PE1500 & PE2400, simpele maar zéér betrouwbaar!
Onlangs de SE3000 en de SE1100 gekocht, wederom zeer tevreden. De SE3000 levert inderdaad geen 2x1500watt op 4ohm, ruim 1400. Dit is ook prima. Jammer dat er nog steeds geen dsp-uitvoering is, dit regel ik vanaf mijn mengtafel, kan ook prima. Daarnaast vindt ik Synq in zijn algemeenheid gelijkwaardig aan QSC. Waarom ik niet voor QSC kies, is omdat er geen doorlus mogelijk op de amps zit, dit is zoooo makkelijk.

Ruud March 3, 2022

Wrote the following about SynQ SE-3000 Class-TD Amplifier

Beter doorsparen voor een betere

Anoniem February 21, 2022

Wrote the following about SynQ SE-3000 Class-TD Amplifier

Versterker levert niet het vermogen dat in specificaties staat.

Description	Type	Language
SE-1800 & SE-3000 - Manual EN	Manual	English
SE-1800 & SE-3000 - Manual FR	Manual	French, English
SE-1800 & SE-3000 - Manual NL	Manual	Dutch, English
SE-1800 & SE-3000 - Manual DE	Manual	English
SE-1800 & SE-3000 - Manual ES	Manual	English, Spanish
SE-3000 - EC Declaration		Unknown