(B-Stock) LD Systems ANNY 10 BPH B5 Accu PA speaker set with

B-stock information

Warranty:	This product comes with a 3-year warranty.
Complete	Some/all accessories missing (see photos)
Original packaging	Damaged
Condition of product	Traces of use (no damage/scratches)
What is a B-Stock Item? Any item we can no longer sell as new is labelled B-stock. This can be for a number of reasons, including damaged or missing packaging, or because the item shows light signs of use. In any case, you can expect the item to work just fine. Always Read the B-Stock Info Every B-stock product page includes relevant information about the item. Be sure to read it in full! Under the Product Information tab, you will find the original product description and specifications, which may refer to accessories that are not included with the B-stock item. This can be a cable, a remote control, software or any other accessory. B-Stock Product Photos B-stock photos can give you a good idea of the condition of the item, its packaging and (missing) contents. Here, what you see is what you get. The photos usually include: A photo of the original item A photo of the B-stock item plus included packaging and accessories (if applicable) A photo of the front of the B-stock item A photo of the back of the B-stock item Photos of any damage (if applicable) Original Packaging Status Packaging in good condition: undamaged, at most some tape residue Packaging damaged: box has dents, tears and/or holes Packaging missing: has been replaced with a Bax Music box. Item Condition Status: New: the product itself is like new, but the packaging may no longer look like new Traces of use (no damage/scratches): smudges, fingerprints and/or dust Scratches/damage: product has scratches and obvious damage Can I Return a B-Stock Item? Yes, our 30-day money-back guarantee also applies to B-stock items. Do I Get a Warranty on B-Stock Items? Yes, the standard warranty period usually applies to B-stock items as well.

(B-Stock) LD Systems ANNY 10 BPH B5 Accu PA speaker set with headset (584 - 608 MHz)
Product no: 5000-0026-5144 Bax Music Warranty: This product comes with a 3-year warranty.

General

With the LD Systems ANNY 10 BPH B5, you get a complete, portable PA solution for speech and music wherever you are. This active 10-inch battery-powered speaker has a 6-channel mixer with EQ and effects, Bluetooth 5.0 and TWS to pair two ANNYs stereo. The set comes with a B5 receiver module, bodypack and headset microphone, so you can go wireless right away. Thanks to wheels, drawbar and tripod lens, you can easily take it anywhere.

Specifications

Product features

Battery included	yes
Playback options	Bluetooth, line in
Battery life (approx.)	21-30 hours
Complete	Some/all accessories missing (see photos)
Sustainable product	not specified
Weight	15 - 19.9 kg
Built-in light/laser effect	no
Included microphone	headset
Stand-mountable	yes
Original packaging	Damaged
RMS power in watts	50 - 99 W
Condition of product	Traces of use (no damage/scratches)
Analogue audio input type	unbalanced line in (RCA), unbalanced stereo line in (TRS mini-jack), microphone input (XLR)
Analogue audio output type	balanced line out (XLR)
Splash-proof	no
Wheels + extendable handle	yes

Weight and dimensions including packaging

Weight (incl. packaging)	12,0 kg
Dimensions (incl. packaging)	66,0 x 46,0 x 42,0 cm

Product specifications

portable active 2-way fullrange speaker (set)
set contents: 1x LD Systems ANNY 10, 1x LD Systems ANNY R B5 receiver module, 1x LD Systems ANNY BP B5 bodypack transmitter, 1x LD Systems WS 100 MH 1 headset microphone
batteries included: 2x AA (for bodypack)
wireless frequencies: 584 - 608 MHz (B5)
spread angle: hor. 120° / vert. 60°
colour: black
weight (total): 18.8 kg
type: active
peak power: 160 W
rms power: 80 W
amplifier class: class D
max. spl peak (sine burst, fullspace/1 m, THD≤10%): 118 dB
max. spl average (sine burst, BW, fullspace/1 m, THD≤10%): 111 dB
frequency response (-10 dB, rel. avg): 45 - 20,000 Hz
crossover frequency: 1800 Hz
number of inputs: 5
input type(s): 3.5 mm jack TRS female
number of outputs: 1
output type(s): XLR 3-pin male
protections: short circuit, overheating
bluetooth version: bluetooth 5.0
bluetooth features: audio streaming (A2DP), TrueWireless™ Stereo
bluetooth range: ≤10 m (class 2)
supported bluetooth codecs: SBC, AAC
receiver (client): yes
number of mic/line inputs: 2
mic/line connector: XLR combo socket
number of line inputs: 2
line-in connector: RCA female
number of music inputs: 1
music input connector: 3.5 mm jack TRS female
output signal: balanced
number of line-outs: 1
line out connector: XLR 3-pin male
mixer: yes
audio processing: 3-band EQ (high, mid, low), delay line, presets
speaker size: 10"
woofer outer diameter: 254 mm
woofer magnet: ferrite
woofer voice coil: 2"
tweeter size: 1"
tweeter magnet: ferrite
tweeter voice coil: 1 mm
mains voltage: 100 - 240 V AC / 50 - 60 Hz
power supply type: switched-mode power supply (SMPS)
power consumption: 150 W
mains connection: IEC C14 plug male
mains fuse: T2AL/250 V
battery technology: lead-acid battery
battery: exchangeable
battery voltage: 12 V
battery capacity: 5,000 mAh
battery life: 5 h (MUSIC) - 25 h (ECO)
charging time (100%): 7 h
charging time (80%): 3.5 h
cabinet design: bass reflex
number of handles: 3
tripod flange: 36 mm (0°/5°)
cabinet material: polypropylene
front grille material: aluminium
ambient temperature: 0 - 40 °C
maximum humidity (non-condensing): 80%
dimensions speaker (w x h x d): 361 x 566 x 300 mm
speaker weight: 18 kg
included: mains cable
receiver module material: sheet steel
receiver module finish: powder-coated
receiver module wireless frequencies: 584 - 608 MHz
receiver module frequency response (-3 dB, rel. avg): 50 - 17,000 Hz
receiver module colour: black
receiver module number of channels: 12
receiver module antenna connector: BNC female
receiver module antennas: BNC female
receiver module dimensions (w x h x d): 72.8 x 39.6 x 118.5 mm
headset directivity: cardioid
headset capsule: capacitor
headset rated impedance: 680 Ω
headset sensitivity (transfer factor): 6.31 mV/Pa
headset phantom power: 5 V
headset connection: mini XLR female
headset cable length: 1 m
headset material: ABS
headset frequency response (-6 dB, rel. avg): 100 - 12,000 Hz
headset colour: black
headset weight: 49 g
bodypack wireless frequencies: 584 - 608 MHz
bodypack frequency response (-3 dB, rel. avg): 45 - 20,000 Hz
bodypack colour: black
bodypack number of channels: 12
bodypack transmission power: 10 mW
bodypack antenna: 1 (fixed)
bodypack input connector: mini XLR male
bodypack minimum signal-to-noise ratio (SNR): 100 dB
bodypack power supply: 2x 1.5 V AA/LR6 (up to max. 8 h)
bodypack dimensions (w x h x d): 64 x 100 x 21 mm
bodypack weight: 9 g