(B-Stock) Dynacord PowerMate 1000-3 Mixer

B-stock information

Warranty:	This product comes with a 3-year warranty.
Complete	Yes
Original packaging	Damaged
Condition of product	Traces of use (no damage/scratches)
What is a B-Stock Item? Any item we can no longer sell as new is labelled B-stock. This can be for a number of reasons, including damaged or missing packaging, or because the item shows light signs of use. In any case, you can expect the item to work just fine. Always Read the B-Stock Info Every B-stock product page includes relevant information about the item. Be sure to read it in full! Under the Product Information tab, you will find the original product description and specifications, which may refer to accessories that are not included with the B-stock item. This can be a cable, a remote control, software or any other accessory. B-Stock Product Photos B-stock photos can give you a good idea of the condition of the item, its packaging and (missing) contents. Here, what you see is what you get. The photos usually include: A photo of the original item A photo of the B-stock item plus included packaging and accessories (if applicable) A photo of the front of the B-stock item A photo of the back of the B-stock item Photos of any damage (if applicable) Original Packaging Status Packaging in good condition: undamaged, at most some tape residue Packaging damaged: box has dents, tears and/or holes Packaging missing: has been replaced with a Bax Music box. Item Condition Status: New: the product itself is like new, but the packaging may no longer look like new Traces of use (no damage/scratches): smudges, fingerprints and/or dust Scratches/damage: product has scratches and obvious damage Can I Return a B-Stock Item? Yes, our 30-day money-back guarantee also applies to B-stock items. Do I Get a Warranty on B-Stock Items? Yes, the standard warranty period usually applies to B-stock items as well.

(B-Stock) Dynacord PowerMate 1000-3 Mixer
Product no: 5000-0026-9309 Bax Music Warranty: This product comes with a 3-year warranty.

General

If you're after a versatile compact mixer, then the third-generation Dynacord PowerMate 1000-3 with built-in amplifier is an ideal option! First of all, you won't need an external amplifier to drive your passive speakers. With 2x 1000 Watts of power at your disposal, you've got plenty of output to send an awesome band mix over the PA. Add the digital audio interface and four USB channels to that, and you've got a recording setup as well!

Plug and Play!

The PowerMate 1000-3 boasts ten mic/line inputs, the last four of which can be used as stereo. In terms of outputs, there are more options than you'll know what to do with! Choose between three outputs for your speakers (SpeakOn, XLR and jack), six insert connections for your mono channels and another two FX and AUX sends. There's also a MIDI input/output on the rear and more than a hundred effects you can fine-tune to perfection!

Specifications

Product features

19 inches	19-inch rack mount (not included)
Number of auxiliaries	5 - 6
Number of microphone inputs	9 - 12
Number of mono channels	10
Number of stereo channels	4
Number of submasters	none
Complete	Yes
Compressor on the inputs	no
Sustainable product	not specified
Equalizer	3-band
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in effects	yes
Original packaging	Damaged
Panning per channel	yes
Connector position	top and back
RMS power (4 ohms)	2x 1,000 W
RMS power (8 ohms)	2x 600 W
Condition of product	Traces of use (no damage/scratches)
Type of mixer inputs	microphone input (XLR), balanced line input (TRS jack), unbalanced line input (RCA)
Type of mixer outputs	balanced line output (XLR), balanced line output (TRS jack), unbalanced line output (RCA), stereo headphone output (TRS jack or mini jack), speaker output (TS jack), lockable speaker output
Mixer power	power cable
Volume control	faders + knobs

Weight and dimensions including packaging

Weight (incl. packaging)	17,1 kg
Dimensions (incl. packaging)	64,0 x 57,0 x 25,5 cm

Product specifications

Dynacord PowerMate 1000-3 mixer
- Class-D amplifier
- output capacity: 2x 1000 W (4 Ohms), 2x 600 W (8 Ohms), 2x 1350 W (2.66 Ohms)
connectors:
- 10x channels
- 10x mic connections (XLR)
- 10x line connections (jack, 4x stereo)
- 6x inserts (jack)
- 4x outputs (XLR, jack, SpeakOn on rear)
- 6x FX/AUX/Mon (jack)
- 4x RCA connections
- USB port
- MIDI I/O (5-pin DIN)
- lamp output (12V DC)
- footswitch: jack
- headphone: jack
- power cable (rear)
digital audio interface
- 4x I/O
- 24-bit AD/DA conversion
- sampling rate: 44.1 / 48 / 88.2 / 96 kHz
lo-cut on mono channels (80 Hz)
voice filter on mono channels
graphic stereo equalizer
feedback filter on mono channels
+48V phantom power
dual stereo 24/48-bit multi-effects processor
100x standard presets, 20 adjustable
tap delay
128 x 64 OLED display
technical info:
- frequency response: 15 Hz - 70 kHz
- crosstalk: 1 kHz
- THD: >0.005%
- noise: -97 dB
- S/N ratio: 105 dB
dimensions (BxDxH): 443.7 x 483 x 135 mm (without cover), 510.5 x 571.5 x 164.5 mm (with cover)
weight: 12.5 kg (without cover), 14 kg (with cover)
included: cover, user manual, power cable, DVD with USB driver

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Marcel Romeo L. January 3, 2026

Wrote the following about Dynacord PowerMate 1000-3 Mixer

I recently purchased a Dynacord PowerMate 3 online from Bax Music. Unfortunately, I encountered a serious problem with the internal effects.
The FX1 and FX2 do not work correctly when changing programs. Even though the display shows that the program has been changed (for example from 5-55 to 5-59 or from bank 5 to bank 6), the effects immediately return to the default program 5-55. The screen indicates a change, but the sound does not follow.
At first, I thought the unit was defective, so I returned it. Today, I received a brand new replacement unit, which I tested together with the staff in the Bax Music store. Unfortunately, the exact same problem occurred on the new unit as well.
Because this issue happens on multiple units and directly affects live use, I cannot rely on this mixer for professional work. For this reason, I do not recommend this product.