Mesa Boogie Walkabout bass guitar amplifier
Mesa Boogie
Discontinued
This product can no longer be ordered
Specifications
Product features
- Connectors
- External speaker(s)
- Number of channels
- 1
- Number of speaker outputs
- 2
- Amp modelling
- No
- Effects loop
- Yes
- Weight
- 5 - 9.9 kg
- Speaker output impedance
- 8 Ohms
- Built-in tuner
- No
- Built-in compressor
- No
- Built-in effects
- None
- Colour
- Black
- Power attenuator
- No
- Amplifier type
- Preamplifier (tube)
- Amplifier valve
- Not applicable
- Power in Watts
- 201 - 300 Watts
Weight and dimensions including packaging
- Weight
- 8,8 kg
- Dimensions
- 55,0 x 48,5 x 16,5 cm
Product specifications
Bass guitar amplifier head
- power: 300 W at 4 ohms, 165 W at 8 ohms
- preamplifier: 2x 12AX7 tubes
- power amplifier: 6x Mosfet transistors
- equalizer: 3-band semi-parametric with + or -15dB cut or boost from 30 Hz to 12 kHz
- controls: bass (active), treble (active), mid (passive), gain, master volume, DI level
- FX loop: fully buffered with true bypass switch
- inputs: 1x active/passive
- 1x mono jack (1/4" TS)
- outputs:
- speaker: 2x mono jack (1/4" TS)
- DI output: XLR with ground lift switch
- FX loop: send + return mono jack (1/4" TS)
- speaker impedance: 8 ohms
- fan cooling
- dimensions: 12.2 x 3.5 x 13.8 inches (310 x 90 x 350 mm)
- weight: 14.3 lbs (6.5 kg)
- fitted gig bag included
No alternatives found
Specifications
Product features
- Connectors
- External speaker(s)
- Number of channels
- 1
- Number of speaker outputs
- 2
- Amp modelling
- No
- Effects loop
- Yes
- Weight
- 5 - 9.9 kg
- Speaker output impedance
- 8 Ohms
- Built-in tuner
- No
- Built-in compressor
- No
- Built-in effects
- None
- Colour
- Black
- Power attenuator
- No
- Amplifier type
- Preamplifier (tube)
- Amplifier valve
- Not applicable
- Power in Watts
- 201 - 300 Watts
Weight and dimensions including packaging
- Weight
- 8,8 kg
- Dimensions
- 55,0 x 48,5 x 16,5 cm
Product specifications
Bass guitar amplifier head
- power: 300 W at 4 ohms, 165 W at 8 ohms
- preamplifier: 2x 12AX7 tubes
- power amplifier: 6x Mosfet transistors
- equalizer: 3-band semi-parametric with + or -15dB cut or boost from 30 Hz to 12 kHz
- controls: bass (active), treble (active), mid (passive), gain, master volume, DI level
- FX loop: fully buffered with true bypass switch
- inputs: 1x active/passive
- 1x mono jack (1/4" TS)
- outputs:
- speaker: 2x mono jack (1/4" TS)
- DI output: XLR with ground lift switch
- FX loop: send + return mono jack (1/4" TS)
- speaker impedance: 8 ohms
- fan cooling
- dimensions: 12.2 x 3.5 x 13.8 inches (310 x 90 x 350 mm)
- weight: 14.3 lbs (6.5 kg)
- fitted gig bag included
Product information
Product no: 9000-0018-5565
General
Warmth, dynamics, rich bass, punchy mids and open trebles - it's hard to believe you can get so much mid-power magic from such a small, portable bass amp. Whereas the world of bass amplifiers usually focusses on class-D amps, Mesa Boogie takes a different approach, finding inspiration in linear power supply and Mosfet power amplification. The result is a remarkably lightweight, yet powerful bass guitar amp with a warm sound, which wears the name Walkabout with pride.
The Mesa Boogie Walkabout: lightweight but potent
Weighing a mere 14.3 lbs, this lightweight bass amp still packs a mean wallop. It delivers either 300 watts to a 4-ohm bass cabinet, or 165 watts to an 8-ohm speaker. Two 12 AX7 tubes in the preamp supply plenty of dynamics and warmth, and a three-band semi-parametric equalizer allows you to control your sound to a level that goes beyond regular tone knob control. Start by shaping your output with the active bass and treble knobs, and then use the passive mid knob to determine the mid response.
Semi-parametric equalizer for optimal tone
Would you like to boost or cut specific frequencies? The Walkabout's equalizer allows you to do so. As the frequencies partly overlap, there are virtually infinite possibilities to tweak your bass sound to perfection. A 15dB boost or cut can be applied anywhere within the frequency range, from the 30Hz bass tones to the highest trebles. Your DI will then transmit your edited sound directly to your mixer. The Mesa Boogie Walkabout even features a true bypass FX loop, which can be switched off for an untainted signal. If you're a demanding bass player who's looking for the perfect sound, this bass amp is well worth your consideration!
Tips or comments about this product
- The Mesa Boogie Walkabout is also available as an amplifier head or a 1x12" combo amp.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
Downloads
Other products from Mesa Boogie
Find all products of the brand Mesa Boogie-
🔥HOT & NEW Bargain Buy£2,111In stock Order before 10:00pm = receive it on Tuesday (free)
Alternative products by other brands
Search all products in category Bass Guitar Amplifier Head-
Bargain Buy -34%Recommended price £922 £611In stock Order before 10:00pm = receive it on Tuesday (free)
-
Bargain Buy -33%Recommended price £445 £299In stock Order before 10:00pm = receive it on Tuesday (free)
-
Bargain Buy -38%Recommended price £920 £569In stock Order before 10:00pm = receive it on Tuesday (free)
-
Popular -34%Recommended price £355 £233In stock Order before 10:00pm = receive it on Tuesday (free)