Discontinued, this product can no longer be ordered.
Not sure if the Mesa Boogie Lone Star Special 2x12 Combo Guitar Amp is for you? Do a Choice Check.
Start Choice Checker
Mesa Boogie Lone Star Special 2x12 Combo Guitar Amp
Product no: 9000-0017-8340
Bax Music Warranty:
This product comes with a 3-year warranty, the tubes come with a 3-month warranty.
General
While the bigger Lone Star gives heaps of clean via 6L6 tubes, the two channels of the little-brother that is the Mesa Boogie Lone Star Special gains its distinctive and massive character from two pairs of EL84s. This combo comes with a deliciously sensual tone palette, a maximum power of 30 Watts via four power amp tubes and, since this is a Mesa Boogie amp, 30-Watts is more than enough. If it's actually too much, the power can be switched to 15 Watts or even further down to 5 Watts for late-night musings with your beloved axe.
Characteristic Brutality with Sultry Sag
While bedroom jamming is accommodated by the flexible Lone Star Special, its destiny lies on the stage or in the studio. The superbly tight low-end; the defined and refined Mesa Boogie mid-range and the brilliant high-end deliver a punch that has little trouble popping out of the mix in medium-sized venues. Power depending, you can kick in the heavy-weight 5Y3 rectifier tube for a deep, sultry 'sagging' attack; otherwise known as classic Texan-blues-rock.
Compact Size, Massive Presence
The front-mounted control panel has the same layout as that of the Lone Star. The first channel is designed to shape your clean tone with rich clear-as-a-bell overtones while the second channel is for clean-with-an-edge or vintage-style overdrive. The breaking-point can be precisely set using the three cascading gain pots that can be used one after the other. The Lone Star Special 2x12 combo pushes its delicately tweaked sound through two Celestion Custom 90 Black Shadow speakers: developed specially for Mesa Boogie alone.
Tips or comments about this product
The Mesa Boogie Lone Star Special is also available as a 1x12 combo (also in black), as a separate guitar amplifier head (also in black), or as a 19-inch rack model (only in black).
Specifications
Product features
| Connectors |
External speaker(s), Footswitch |
| Number of channels |
2 |
| Number of speakers |
2 |
| Amp modelling |
no |
| Effects loop |
yes |
| Weight |
30 - 34.9 kg |
| Built-in tuner |
no |
| Built-in effects |
reveb (analogue) |
| Colour |
beige |
| Speaker diameter |
12 inches |
| Power attenuator |
no |
| Amplifier type |
tube |
| Amplifier valve |
EL84 |
| Power in Watts |
21 - 30 Watts |
| Can be powered by battery |
no |
Weight and dimensions including packaging
| Weight (incl. packaging) |
35,0 kg |
| Dimensions (incl. packaging) |
83,0 x 66,0 x 45,0 cm
|
Product specifications
- fully analogue tube amp
- wattage: 30, 15, 5 watts, selectable per channel
- tubes: 5x 12 AX7 tubes fitted in the preamplifier
- 4x EL84 power tubes
- Rectifier tube: Mesa Boogie 5Y3, switch for Silicon Diode rectifier
- number of channels: 2 - clean, clean/overdrive
- channel 1: clean
- channel 2: clean or drive, via cascading gain controls
- number of controls:
- channel 1: gain, treble, mid, bass, presence, master volume
- channel 2: drive, gain, treble, mid, bass, presence, master volume
- channel 1/2: output, solo
- FX loop with adjustable effect send level and true bypass switch
- adjustable reverb, warm or bright, per channel
- outputs: solo (1x), speaker out (3x) and slave out (1x)
- included foot switch with controls for channel 1/2 and solo
- maintenance-free bias control
- colour: Cocoa Bronco vinyl with Cream Bronco front panel and Tan Jute speaker grille
- 33.5kg
- 515 x 680 x 300mm
connectors:
- front panel:
- input: 1x mono jack (TS)
- footswitch: 1x stereo jack (TRS)
- rear panel:
- FX send/return, 2x mono jack (TS)
- external channel switch: 1x mono jack (TS)
- solo switch: 1x mono jack (TS)
- slave out: 1x mono jack (TS)
- speaker out: 1x mono jack (TS)
- comes with cover and foot switch