Based on more than 21,240 customer reviews

Beyma CD-11Fe 70W, 8 Ohm 1-inch Professional Ferrite Compression Driver

no reviews yet
Beyma CD-11Fe 70W, 8 Ohm 1-inch Professional Ferrite Compression Driver

Discontinued

This product can no longer be ordered

Specifications

Product features

Tweeter diameter
1 inch
Sustainable product
Not specified
Sensitivity
109 dB
Includes horn
No
Maximum frequency
19 - 19.9 kHz
Minimum frequency
500 - 999 Hz
Nominal impedance
8 ohms
RMS capacity in watts
50 - 99 W
Throat exit
Not applicable
Type of magnet
Ferrite

Weight and dimensions including packaging

Weight
1,9 kg
Dimensions
12,5 x 12,0 x 6,5 cm

Product specifications

  • technical specifications:
    • throat diameter: 25.4mm, 1"
    • nominal impedance: 8 Ohms
    • minimum impedance: 5.6 Ohms
    • Re: 4.3 Ohms
    • power capacity: 70W AES over 1.5khz
    • program power: 140W over 1.5kHz
    • sensitivity: 109 dB 1W / 1m @ ZN coupled to TD-164
    • frequency range: 700 Hz - 19,000 Hz
    • recommended crossover frequency: 1.5kHz or higher (12db/oct min. slope)
    • voice-coil diameter: 44.4mm, 1.75"
    • flux density: 1.5 T
    • BL factor: 6.6 N/A
    • diaphragm material: PM4
  • construction:
    • depth: 59mm
    • mounting via three M5 screw holes, 120º spacing on 57mm (2.24 in) diameter circle
    • or via two M5 threaded holes, 180º apart on 76.2mm (3 in) diameter circle
    • net weight: 1.8 kg
    • total weight: 1.9 kg
    • magnet: ferrite

No alternatives found

Specifications

Product features

Tweeter diameter
1 inch
Sustainable product
Not specified
Sensitivity
109 dB
Includes horn
No
Maximum frequency
19 - 19.9 kHz
Minimum frequency
500 - 999 Hz
Nominal impedance
8 ohms
RMS capacity in watts
50 - 99 W
Throat exit
Not applicable
Type of magnet
Ferrite

Weight and dimensions including packaging

Weight
1,9 kg
Dimensions
12,5 x 12,0 x 6,5 cm

Product specifications

  • technical specifications:
    • throat diameter: 25.4mm, 1"
    • nominal impedance: 8 Ohms
    • minimum impedance: 5.6 Ohms
    • Re: 4.3 Ohms
    • power capacity: 70W AES over 1.5khz
    • program power: 140W over 1.5kHz
    • sensitivity: 109 dB 1W / 1m @ ZN coupled to TD-164
    • frequency range: 700 Hz - 19,000 Hz
    • recommended crossover frequency: 1.5kHz or higher (12db/oct min. slope)
    • voice-coil diameter: 44.4mm, 1.75"
    • flux density: 1.5 T
    • BL factor: 6.6 N/A
    • diaphragm material: PM4
  • construction:
    • depth: 59mm
    • mounting via three M5 screw holes, 120º spacing on 57mm (2.24 in) diameter circle
    • or via two M5 threaded holes, 180º apart on 76.2mm (3 in) diameter circle
    • net weight: 1.8 kg
    • total weight: 1.9 kg
    • magnet: ferrite

Product information

Product no: 9000-0102-8509

General

Fitted with a ferrite magnet, fully optimised to meet FEA norms and finished with a dual-layer, lightweight aluminium DUO voice-coil, the Beyma CD-11Fe compression driver delivers professional treble reproduction. The flat response and low harmonic distortion of this unit is also supported by a polymer diaphragm, a 700 to 19,000 Hertz frequency range and a 109 decibel sensitivity level. The CD-11Fe compression driver offers a 70W AES power rating at 8 Ohms.

Bax Music Warranty This product comes with a 3-year warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Alternative products by other brands

Search all products in category Compression Driver
Compare your gear (1/10)