▾

Beyma WL3/Fe 70W, 0.8-inch Ferrite Waveguide Compression Driver (Set of 2)

no reviews yet

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
Reviews (0)
Downloads (1)

Beyma WL3/Fe 70W, 0.8-inch Ferrite Waveguide Compression Driver (Set of 2)
Product no: 9000-0102-8543 Bax Music Warranty: This product comes with a 3-year warranty.

General

The 0.8 inch Beyma WL3/Fe high-frequency compression driver comes partnered up with a 3 inch waveguide to switch the focus to reducing interference and minimising acoustic loss. Ideal for finishing off array systems, this driver comes fitted with a ferrite magnet and a lightweight 1.75 inch voice coil. The level of quality is carried through to a polymer diaphragm that supports a 1,000 to 18,000Hz frequency range, while the sensitivity sits at 102 decibels. Once installed, the WL3/Fe promises an AES power rating of 70 Watts at 8 Ohms.

Specifications

Product features

Tweeter diameter	0.8 inches
Sustainable product	not specified
Sensitivity	102 dB
Includes horn	yes
Maximum frequency	18 - 18.9 kHz
Minimum frequency	1 - 3.9 kHz
Nominal impedance	8 ohms
RMS capacity in watts	50 - 99 W
Throat exit	not applicable
Type of magnet	ferrite

Weight and dimensions including packaging

Weight (incl. packaging)	3,6 kg
Dimensions (incl. packaging)	22,5 x 16,5 x 10,5 cm

Product specifications

technical specifications:
- throat diameter: 20.5mm / 0.8 inch
- flange height: 76.2mm / 3"
- nominal impedance: 8 Ohms
- impedance: 5.1 Ohms at 3.5 khz
- Re: 4.3 Ohms
- AES power capacity: 70W
- program power: 140W
- sensitivity: 102 db 1w / 1m @ zn (90º x 5º horn)
- frequency range: 1000 Hz - 18000 Hz
- recommended crossover frequency: 1.8kHz or higher (12dB/oct min. slope.)
- speaker coil diameter: 44.3mm, 1.75"
- flux density: 1.6 T
- BL factor: 4.8 N/A
- diaphragm material: pm4
construction:
- exterior diameter: 115mm (4.5")
- depth: 150mm (5.91")
- mounting: x4 6mm screw holes
- net weight: 1.7 kg
- magnet: ferrite