Discontinued, this product can no longer be ordered.
Not sure if the Audio Technica ATM350U microphone with clip-on mounting system is for you? Do a Choice Check.
Start Choice Checker
Audio Technica ATM350U microphone with clip-on mounting system
Product no: 9000-0030-1504
Bax Music Warranty:
This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.
General
In the footsteps of the popular ATM350 instrument microphone, Audio Technica offer the ATM350a. The ATM350U includes the cardioid microphone and the universal AT8490U UniMount clip-on system, which was designed especially for brass wind instruments. The high sound pressure level (SPL) of the microphone (159 dB) ensures a broad dynamic range that facilitates piano, brass instruments, snare drums, toms and violin. The result is a clear, well-balanced frequency response.
Flexible 5-inch gooseneck
When you invest in the ATM350U, you'll receive the UniMount AT8490U universal clip-on gooseneck as well. It's ideal for attaching the microphone securely to your instrument and positioning it to perfection. The robust gooseneck is 12.7 cm long and stays securely attached to your instrument. The cardioid pickup pattern ensures a focused sound without capturing noise from the sides and rear. Furthermore, it has an 80Hz high-pass filter on the module that filters out low frequencies when activated.
Specifications
Product features
| Connection type |
UniPak / Hirose (4-pin) |
| Microphone sensitivity (dBV/PA) |
-49 |
| Maximum SPL |
150 dB - 159 dB |
| Maximum frequency |
20 - 20.9 kHz |
| Minimum frequency |
40 - 49 Hz |
| Polar pattern |
cardioid |
| Especially for |
wind instruments, double basses / cellos / violins, snare drums / toms / percussion instruments, pianos |
Weight and dimensions including packaging
| Weight (incl. packaging) |
709 gr |
| Dimensions (incl. packaging) |
31,0 x 14,5 x 8,5 cm
|
Product specifications
- instrument microphone
- capsule: condenser (permanently polarized)
- pickup pattern: cardioid
- frequency response: 40 - 20,000 Hz
- sensitivity: -49 dB (3.5 mV) 1V @ 1 Pa
- impedance: 200 ohms
- max. sound pressure level (SPL): 159 dB, 1 kHz @ 1% THV
- dynamic range: 130 dB, 1 kHz @ max. SPL
- signal-to-noise ratio: 65 dB, 1 kHz @ 1 Pa
- phantom power supply: 11 - 52V / 3.5 mA
- switch: neutral, roll-off
- mic weight: 14.5 g
- power module weight: 90 g
- microphone dimensions: 37.8 mm
- max. body diameter: 12.2 mm
- power module dimensions:
- 92 mm (length)
- 18.9 mm (diameter)
- output connector: 3-pin male XLR
- cable:
- length: 4 m (permanently attached to microphone)
- diameter: 3.2 mm
- type: HIROSE HR10 (shielded)
- box contents:
- ATM350a cardioid condenser microphone
- AT8543 power module
- AT8491U UniMount universal clip-on mounting system
- AT8490 UniMount 5-inch gooseneck
- AT8468 violin clip
- M36 protective carrying bag
