Discontinued, this product can no longer be ordered.
Not sure if the Electro Voice N/D 267 AS dynamic vocal microphone with switch is for you? Do a Choice Check.
Start Choice Checker
Electro Voice N/D 267 AS dynamic vocal microphone with switch
Product no: 9000-0008-2917
Bax Music Warranty:
This product comes with a 3-year warranty.
General
The Electro Voice N/D 267AS is technically exactly the same as the N/D 267A by Electro Voice, with only one important different: an on/off switch. It's a handheld microphone for live use, and is equipped with a dynamic element, which features a neodymium magnet for quicker response. This means that you get more gain before feedback, and as a result, the microphone's signal is more stable.
Vocally-Optimized Bass
This Electro voice N/D 267AS has a handsome bit of technology on board. It's called VOB, or Vocally-Optimized Bass, and it ensures that the proximity effect of the microphone is kept in check. Proximity effect is the phenomenon where the sound gets darker as the sound source gets closer to the microphone. VOB technology, however, ensures that resonance in the low frequencies is compressed, whereby the vocals remain clear and detailed. All of this together provides a sound that cuts nicely through the mix and that can always be localised in the total sound.
Tips or comments about this product
This microphone is also available without an on/off button.
Specifications
Product features
| On/Off Switch |
Yes |
| Microphone sensitivity (dBV/PA) |
-50 |
| Microphone weight |
200-249 grams |
| Microphone impedance |
600-649 ohms |
| Maximum SPL |
> 160 dB |
| Maximum frequency |
15 - 15.9 kHz |
| Microphone accessories |
microphone clip, bag / box |
| Microphone set |
no |
| Minimum frequency |
40 - 49 Hz |
| Polar pattern |
cardioid |
| Audio connector |
3-pin XLR |
Weight and dimensions including packaging
| Weight (incl. packaging) |
500 gr |
| Dimensions (incl. packaging) |
26,0 x 13,0 x 8,0 cm
|
Product specifications
- dynamic vocal microphone
- element type: dynamic, neodymium magnet structure
- frequency response (close): 45 Hz - 15 kHz
- frequency response (far): 100 Hz - 15 kHz
- pickup pattern: cardioid
- sensitivity: (1 kHz): -50 dBV/PA
- impedance: 600 ohms
- connector: 3-pin XLR
- finish: non-reflective black paint
- delivered with: microphone clip and case
- dimensions: 181 x 52 x 20 mm
- weight: 238 grams
