Efnote Pro 501 Traditional 5-Piece Electronic Drum Kit

Efnote Pro 501 Traditional 5-Piece Electronic Drum Kit
Product no: 9000-0127-2205 Bax Music Warranty: This product comes with a 3-year warranty.

General

Progressive and professional from every angle, the Efnote Pro 501 Traditional five-piece kit keeps the size down while blowing the potential wide open. Compact enough to take on smaller stages as well as big venues, this kit features a tight 16 inch kick drum, which isn't just easy to lug from gig to gig but delivers impressively deep and resonant sound. Basically, every part of this kit has been prepped for expansion, so you can endlessly vary and customise everything to match any situation, completing a more-than-reliable, high-level stage partner built out of the 16 inch kick, a 10 inch and 11 inch tom, 12 inch floor tom, 12 inch snare plus two 16 inch crash pads, an 18 inch ride pad and a set of 14 inch hi-hat pads.

Advanced Sound Control

Connect directly with the PA sound system via the set of twelve balanced XLR outputs lined up along the rear of the base module and gain consistent and fully isolated sound transfer. With this system, you're getting an essentially perfect from-of-house mix supported by unparalleled balance and clarity, leaving you free to perform without fear of any feedback issues or microphone bleed and completely eliminating the need for acoustic drum screens, so you can actually interact with your band and your audience.

Flexibility & Playability

The innovative two-piece design of the sound module combines smooth ease of use with professional expansion options, where the low-profile control panel features a touch-responsive full-colour LCD display and all of the options, functions and variable parameters so you can quickly set up and adjust the shell and cymbal sounds, which vary from modern and crisp to dark and vintage as preferred. Meanwhile the tour-proofed floor-standing module base has been kitted out with every possible connection port so that, whether you're a dedicated drummer, producer, live engineer or mixing engineer, this kit brings the necessary flexibility no matter the space or the setup.

Inspired Technology & Controls

The Efnote Pro 501 kit is supported by the ELISE™ Sensing Processor 2.0, which responds to even the most subtle of touches with improved sensitivity and natural dynamics. Via the twelve-channel multi-track USB audio port and sixteen-channel USB MIDI port, complex recordings can be created and laid down in any big-name DAW. This system even hands you the tools needed to make mixes and pre-mixes for smaller shows, complete with pre-console EQ and compression, just in case the in-house mixer is limited when it comes to audio channels. All in all, the Efnote Pro 501 is no mere electronic kit, but an advanced and inspired instrument that manages to stretch the boundaries set by any of the models that came before it.

Tips or comments about this product

Please note: The kick pedal, hi-hat stand and drum throne seen in the image serve illustrative purposes only and are not included.

Specifications

Product features

Sustainable product	not specified
Type of Electronic drum kit	acoustic look
Mesh-head drum pads	yes, snare drum + toms
Includes bass drum pedal	no
Mechanical hi-hat	yes (excluding stand)
Number of toms	3
Number of cymbals (excl. hi-hats)	3
Includes drum stool	no
Rack included	not applicable
Built-in speakers	no
Includes headphones	no
Drumsticks included	no

Weight and dimensions including packaging

Weight (incl. packaging)	71,5 kg
Dimensions (incl. packaging)	105,0 x 101,0 x 74,0 cm

Product specifications

EFNOTE PRO sound module: EFD-PRO
- user interface:
  - full colour, capacitive touchscreen
  - 2x multifunctional control knobs (with LED ring)
  - 1x value knob (with LED ring)
- trigger interface:
  - 3-zone (7x): snare, crash 1/2/3/4 (FX), ride, hi-hat
  - 2-zone (7x): tom 1/2/3/4/5, crash 5 (splash), crash 6 (china)
  - 1-zone (1x): kick
  - ELISE™ 2.0 trigger sensing chip
- audio/MIDI-interface:
  - bus out: 12x XLR(M) (+4dBu, balanced, +23dBu max), attenuator (-6dB, -12dB, -20dB, -30dB), GND lift switch (1-6, 7-12)
  - line out: 2x 1/4” TS phone (-10dBV, unbalanced, +14dBV max)
  - phones out: 1x 1/4” stereo (320 + 320 mW @32Ω), 1x 1/8” stereo (320 + 320 mW @32Ω)
  - monitor in: 2x XLR(F) + 1/4” TRS combo (+4dBu, balanced, +24dBu max), GND lift switch
  - line in: 2x 1/4” TS phone (-10dBV, unbalanced, +10dBV max)
  - 0dBu = 0.775Vrms, 0dBV = 1.0Vrms
  - USB: B type USB 2.0 hi-speed
  - audio: 12ch out (48kHz/24bit) / 2ch in (48kHz/16bit), mac/windows ASIO
  - MIDI: I/O
  - Bluetooth: audio input (A2DP)
  - Bluetooth MIDI in/out (Bluetooth Low Energy/GATT)
  - transmission frequency: 2402-2480 MHz, max. transmission strength: 2.5 mW EIRP
  - MIDI out: 5-pins DIN
- other interfaces:
  - link port: D-SUB 9-pin (use included link cable EFD-DSUB9-2 only)
  - USB (flash drive): A type USB 2.0 (flash drive supported only)
  - USB (for service): B type (for service purposes only)
- drum kits/instruments:
  - preset drum kits: 23 (editable)
  - user ddrum kits: 100
  - instruments: acoustic drums and cymbals (stereo), percussion (stereo), attack elements
  - Tru-Aco™ audio technology
- editing parameters:
  - level, pan, stemming, damping (per pad)
  - 2-band EQ (per pad)
  - overlay note (per zone)
  - global pan (for al kits)
  - editable kit names, colours and background kit image (user kits)
- click:
  - 4x click setup memory
  - tempo (BPM): 40.0-240.0 (0.1 step)
  - time signature: 1/4-13/4, 2/8-13/8
- set-list:
  - 15x set-list (20 slots per list)
  - matrix-style 20 slot layout
  - slot tag colour and slot notes functions
  - tempo and time signature settings for each slot
  - every set-list can be saved to a USB flash drive
- recorder:
  - tracks: 15
  - resolution: 480 TPQN
- busses:
  - 16 channel audio busses (12x bus + bus mix L/R + main L/R)
  - bus HPF and EQ (bus 1-12), bus compressor (bus 1-6)
  - 12x bus outputs (12x XLR analogue and 12ch USB audio)
- bus mixer:
  - main HPF and EQ (main L/R)
- other features:
  - expansion options
  - foot light
  - ground-lift switches (for bus output and monitor input)
  - fully metal housing
  - protective handles
- dimensions and weight
- control panel: 128 x 172 x 30mm (W x D x H), 700g
- base unit: 206 x 210 x 238mm (W x D x H) 3.25 kg
  - *no expansions included
- power supply/consumption: AC power supply (FJ-SW1202000N-EFNOTE) DC 12V, 1.5A
included accessories
- 1x link cable, 2.0m (EFD-DSUB9-2)
- 1x AC power supply (FJ-SW1202000N-EFNOTE)
- 10x trigger cable, 3.0m (EFD-TRS-LL3)
- 1x hi-hat cable, L 3.0m (EFD-DIN6-LL3)
- module mounting kit
- smartphone tray set
- tuning key
- cable binders
- cable labels
- quick-start guide