Set of two XPND female power plugs for use with the XPND Battery Power Kit and Daisy Chain.
Set of two XPND male power plugs for extending your XPND system.
Adjust the placement of your power plugs with D'Addario's XPND Daisy Chain.
Make your own custom power cables for pedals with D'Addario's XPND DIY kit.
Need a cable to power that new stompbox you just planted on your pedalboard? Just grab the RockBoard Flat Power Cable.
If you have a power adapter with standard 2.1mm barrel plugs, then you can use the Visual Sound 3.5mm Converter (C35) for powering EHX pedals, old DOD effects and other stompboxes with a 3.5mm power input.
The Truetone CL6 (previously known as the Visual Sound CL6) L6 Converter makes it possible to connect Line 6 modelling pedals and the Digitech RP100 with a normal DC power supply unit with 2.1mm plugs.
Strymon's EIAJ is a cable that can be used to connect two multi-power adapters like the Zuma and Ojai together giving you even more isolated power outputs for your effects pedals. This cable is 23 cm long.
Strymon's Polarity Reverse Cable can be connected to effects pedal power supplies like the Zuma and Ojai in order to power inverted polarity pedals. The cable is 15 cm long.
This set of 5 Strymon DC Power Cables is suitable for use with Strymon's Zuma or Ojai power supplies that can be used to power various effects pedals. The cables are 92 cm in length and have 2.1 mm angled connectors at both ends.
If your effects pedal needs 18V or 24V of power, Strymon's Voltage Doubler Cable provides either. Simply connect the 10 cm long cable to the 9V or 12V outputs on a multi-power adapter like the Zuma or Ojai and you're all set.
The truly ingenious RockBoard Power Ace Battery Clip Converter allows you to power a battery-powered effect pedal with a DC power supply.
The Voodoo Lab PPPK-8 Replacement Pack gets you eight fresh power cables for your pedalboard; six 46cm-long cables and two 61cm-long cables.
This Voodoo Lab power cable is purpose-made for 9V battery-powered effect pedals without a power port. It's 46cm long and comes with a 2.1mm straight barrel plug on one end and a 9V battery snap-on connector on the other.
With this RockBoard Flat Polarity Reverser hook-right cable 30 cm, you change the polarity from centre negative, to centre positive.
Want to power your stompbox using a 9V block battery? Then here is the Eno PD-1 power cable with battery clip. Meant for 9V DC pedals that don't have space for a battery.
With this RockBoard Flat Daisy Chain Power Cable 1-6 straight, you can connect up to 6 effects pedals and also save quite a bit of space on your pedalboard.
The Voodoo Lab RS24-2 combi pack bundles up two 24-inch-long power cables equipped with a right-angled and a straight 2.1mm barrel plug.
This Voodoo Lab Voltage Doubling Cable features two 2.1mm straight barrel plugs at one end and a 2.5mm straight barrel plug at the other end and can be used to connect an effect pedal with reversed polarity to a pair of 9V or 12V power supply outputs.
A solid solve for centre positive effect pedals with a reversed polarity power port, this Voodoo Lab cable has a space-saving, right-angle 2.5mm barrel plug at one end and a similar 2.1mm barrel plug at the other.
The MyVolts Ripcord adapter cable comes fitted with a USB plug and barrel plug so it can be hooked up to power effect pedals via a USB power source. Add the included Crazy Chain cable, and you can even power a Korg Volca module.
The MyVolts Ripcord adapter cable comes fitted with a USB plug and barrel plug so it can be hooked up to power effect pedals via a USB power source.
This PAGX adapter cable has a 2.5mm barrel plug at one end and a 4-pin DIN plug on the other, which means of an it can be used to connect your GCX Audio Switcher to your Voodoo Lab pedal power supply.
The Voodoo Lab CBAR21-R DIY 2.1mm right angle barrel connector from Voodoo Lab is a 2.1mm right angle connector that you can solder to a cable.
The MyVolts Ripcord is an adapter cable from USB to barrel. That way, you can, for example, power an effects pedal coming from a USB source.
This 91cm-long power cable by Voodoo Lab features a straight and a right-angle plug, both 2.1mm standard polarity, and can be used for guitar effects pedals.
The MyVolts Crazy Chain is a series of cables that allow you to daisy-chain devices. Specifically, these are barrel-powered devices, such as those you find in guitar effects and small synths, for example.
This 46cm-long power cable for effects pedals by Voodoo Lab has a 2.1mm centre-positive input (reverse polarity) and right-angled plugs to save space on your pedal board.
Presenting an entire series of daisy-chain cables for smaller outboard synth modules as well as effect pedals, MyVolts Crazy Chain cables come fitted with angled barrel plugs and finished with a tight design.
The MyVolts Ripcord Tip Adaptor has been specially designed to expand the already-extensive Ripcord Series with even more connection options.
The MyVolts Ripcord Tip Adaptor is there specifically to give the already extensive Ripcord series even more connection options.
