The Voodoo Lab RS24-2 combi pack bundles up two 24-inch-long power cables equipped with a right-angled and a straight 2.1mm barrel plug.
This type of cable - with 2.1mm plugs and normal polarity (centre negative) - is used for a wide range of effect pedals. This 46cm Voodoo Lab cable takes up little space thanks to its right angle plugs.
A solid solve for centre positive effect pedals with a reversed polarity power port, this Voodoo Lab cable has a 2.5mm barrel plug at one end and a standard 2.1mm barrel plug at the other.
Connect older effect pedals fitted with a mini-jack power port up to the power output of any standard pedal power supply using the high-grade Voodoo Lab PPMIN-R adapter cable.
This pair of Voodoo Lab PPBAR-RS24 power cables can be used to hook up practically any Voodoo Lab-made power supply. Each cable is 61cm-long and comes fitted with right-angled 2.1mm barrel plugs.
Got your hands on a vintage effect pedal? Sweet! To power it, you might need this Voodoo Lab cable. It's 46cm long, has a centre-positive polarity and comes with a mini-jack plug on one end and a 2.1mm straight barrel plug on the other.
This Voodoo Lab Voltage Doubling Cable features two 2.1mm straight barrel plugs at one end and a 2.5mm straight barrel plug at the other end and can be used to connect an effect pedal with reversed polarity to a pair of 9V or 12V power supply outputs.
At 91cm long, the Voodoo Lab PPBAR-R36 is ideal for large pedalboards. This power cable has a centre-negative polarity and comes fitted with right-angled plugs.
Connect older battery-powered effect pedals that don't come fitted with a power port up to the power output of any standard pedal power supply using the high-grade Voodoo Lab Voodoo Lab PPBAT-R adapter cable.
Pedals that require 18 V or 24 V of power can use Voodoo Lab's PPEH24 Voltage Doubling Cable. It's 46 cm long and is centre negative (normal polarity). Two 2.1mm plugs connect to a power source and the other 2.1mm plug to your pedal.
Fitted with one straight and one right-angled 2.1mm centre-negative barrel plug, the 46cm long Voodoo Lab PPBAR-RS power cable is a neat fix for hooking stompboxes up to a power supply across a wide pedalboard.
Power an 18 or 24-volt pedal with two 9 or 12-volt outputs using this 10-cm long Voodoo Lab Double Adapter cable. The female connector is suitable for power cables with a 2.1mm centre-negative plug.
This 46cm-long, centre-negative Voodoo Lab power cable comes fitted with a straight 2.1mm barrel plug at both ends, making it perfect for hooking up effect pedals.
This ten-centimetre-long, centre-negative Voodoo Lab cable is able to double the power you're feeding your effect pedal.
A solid solve for centre positive effect pedals with a reversed polarity power port, this Voodoo Lab cable has a space-saving, right-angle 2.5mm barrel plug at one end and a similar 2.1mm barrel plug at the other.
With the Voodoo Lab Output Splitter Adapter, you can hook two effect pedals up to a single power output. This 10cm-long cable is equipped with 2.1mm connectors with a centre-negative polarity and has been ground-lifted to counter hum.
The Voodoo Lab CBAR21-R DIY 2.1mm right angle barrel connector from Voodoo Lab is a 2.1mm right angle connector that you can solder to a cable.
The Voodoo Lab PPBAR-R24 is ideal for medium to large pedalboards. This 61cm-long power cable has a centre-negative polarity and comes fitted with right-angled plugs.
The Voodoo Lab RSMIX is a cable set of 3 cables with one angled and one straight 2.1mm barrel connector. The length of each cable is different. Specifically, there are 3 pieces of PPBAR-R cables in sizes 18, 24 and 36 inches.
This 46 cm long Voodoo Lab power cable (with straight plugs) is intended for effects pedals that use a 2.1 mm jack with reverse polarity ('centre positive').
Use this Voodoo Lab cable (46 cm) for effects connected to an AC power supply and equipped with 2.5 mm input.
A premium quality angled 2.5 mm x 5.5 mm connector, such as this CBAR25-R from Voodoo Lab, to solder onto a cable yourself can come in handy when you can't exactly find the cable that meets all your requirements.
The Voodoo Lab PPBAR-RS24 61cm long effect pedal power cable comes finished with one straight and one right-angled standard plug. Both plugs are standard 2.1mm, centre negative and able to feed most stompboxes.
The Voodoo Lab PA36-R power cable is 36 inches long and comes with a 2.1mm barrel plug on one end and no plug on the other, which means you can solder any preferred plug onto the stripped end to finish a custom guitar pedal power cable.
The Voodoo Lab PA36 is a straight 2.5mm connector on a 36-inch or 92-centimetre AC cable. The red connector is of sturdy material and good quality. The other end of the cable is a bare end.
The Voodoo Lab PPPK-8 Replacement Pack gets you eight fresh power cables for your pedalboard; six 46cm-long cables and two 61cm-long cables.
This Voodoo Lab power cable is purpose-made for 9V battery-powered effect pedals without a power port. It's 46cm long and comes with a 2.1mm straight barrel plug on one end and a 9V battery snap-on connector on the other.
This PAGX adapter cable has a 2.5mm barrel plug at one end and a 4-pin DIN plug on the other, which means of an it can be used to connect your GCX Audio Switcher to your Voodoo Lab pedal power supply.
This 91cm-long power cable by Voodoo Lab features a straight and a right-angle plug, both 2.1mm standard polarity, and can be used for guitar effects pedals.
The Voodoo Lab RMIX is a cable set of 3 cables with angled 2.1mm barrel connectors. The length of each cable is different. Specifically, there are 3 pieces of PPBAR-R cables in sizes 18, 24 and 36 inches.
This 46cm-long power cable for effects pedals by Voodoo Lab has a 2.1mm centre-positive input (reverse polarity) and right-angled plugs to save space on your pedal board.
Filters
Filters