The MyVolts Ripcord Tip Adaptor is there specifically to give the already extensive Ripcord series even more connection options.
The MyVolts Ripcord adapter cable comes fitted with a USB plug and barrel plug so it can be hooked up to power effect pedals via a USB power source.
The MyVolts Ripcord is an adapter cable from USB to barrel. That way, you can, for example, power an effects pedal coming from a USB source.
Are you an avid user of MyVolts' Ripcord products, in which (among other things) you can connect effects pedals to a USB connector? With the Ripcord Tipset, you get seven barrel adapters!
Presenting an entire series of daisy-chain cables for smaller outboard synth modules as well as effect pedals, MyVolts Crazy Chain cables come fitted with angled barrel plugs and finished with a tight design.
Strymon's Polarity Reverse Cable can be connected to effects pedal power supplies like the Zuma and Ojai in order to power inverted polarity pedals. The cable is 15 cm long.
Strymon's EIAJ is a cable that can be used to connect two multi-power adapters like the Zuma and Ojai together giving you even more isolated power outputs for your effects pedals. This cable is 23 cm long.
This set of 5 Strymon DC Power Cables is suitable for use with Strymon's Zuma or Ojai power supplies that can be used to power various effects pedals. The cables are 92 cm in length and have 2.1 mm angled connectors at both ends.
If your effects pedal needs 18V or 24V of power, Strymon's Voltage Doubler Cable provides either. Simply connect the 10 cm long cable to the 9V or 12V outputs on a multi-power adapter like the Zuma or Ojai and you're all set.
Need a cable to power that new stompbox you just planted on your pedalboard? Just grab the RockBoard Flat Power Cable.
The MyVolts Ripcord adapter cable comes fitted with a USB plug and barrel plug so it can be hooked up to power effect pedals via a USB power source. Add the included Crazy Chain cable, and you can even power a Korg Volca module.
Strymon's EIAJ is a cable that can be used to connect two multi-power adapters like the Zuma and Ojai together giving you even more isolated power outputs for your effects pedals. This cable is 92 cm long.
Want to power your stompbox using a 9V block battery? Then here is the Eno PD-1 power cable with battery clip. Meant for 9V DC pedals that don't have space for a battery.
The Voodoo Lab PPPK-8 Replacement Pack gets you eight fresh power cables for your pedalboard; six 46cm-long cables and two 61cm-long cables.
Equipped with a USB plug at one end and a barrel plug at the other, this MyVolts Ripcord gives guitarists a unique and potentially amazingly practical way to power an effect pedal: via USB.
This Voodoo Lab power cable is purpose-made for 9V battery-powered effect pedals without a power port. It's 46cm long and comes with a 2.1mm straight barrel plug on one end and a 9V battery snap-on connector on the other.
The MyVolts Ripcord Tip Adaptor has been specially designed to expand the already-extensive Ripcord Series with even more connection options.
This PAGX adapter cable has a 2.5mm barrel plug at one end and a 4-pin DIN plug on the other, which means of an it can be used to connect your GCX Audio Switcher to your Voodoo Lab pedal power supply.
This 46cm-long power cable for effects pedals by Voodoo Lab has a 2.1mm centre-positive input (reverse polarity) and right-angled plugs to save space on your pedal board.
The MyVolts Crazy Chain is a series of cables that allow you to daisy-chain devices. Specifically, these are barrel-powered devices, such as those you find in guitar effects and small synths, for example.
This 91cm-long power cable by Voodoo Lab features a straight and a right-angle plug, both 2.1mm standard polarity, and can be used for guitar effects pedals.
The Voodoo Lab RMIX is a cable set of 3 cables with angled 2.1mm barrel connectors. The length of each cable is different. Specifically, there are 3 pieces of PPBAR-R cables in sizes 18, 24 and 36 inches.
