MXR M237 DC Brick multi-pedal power supply

General

If you like to use a lot of effects pedals, then the MXR M237 DC Brick (which is an improved version of the Dunlop DCB10) is for you. This grey box can power up to 10 pedals at once, both 9V and 18V. It can handle a power output of up to 2000 mA, so you won't have to worry about overloading. That should be more than enough for most effects pedals. The MXR DC Brick also has built-in protection against short circuits and overloading, with an LED indicator per output. Use the M237 to power your effects pedals with cleanly, reliably and safely.

MXR M237 DC Brick: power up to 10 pedals at once

There are four 9V outputs on each side of the brick. The outputs are standard 5.5 x 2.1 mm barrel plugs, which are suitable for most effects pedals, with a maximum of 1200 mA. The left hand side of the Brick has two 18V outputs suitable for pedals like Dunlop's SW95 Cry Baby Slash Signature wah or the MXR M108 10-band Graphic EQ. In total you can connect up to 800 mA here. The M237 DC Brick comes complete with 10 cables and an 18V adapter.

Constant power even in foreign lands

Unlike batteries that slowly lose power, the MXR M237 DC Brick provides a constant voltage so that your pedals produce an optimal sound. Even when it's fully loaded, the DC Brick will remain cool and function silently. The 18V input is suitable for use with adapters for different countries from 100 to 240 volts, 47 to 63 hertz, which is perfect for the travelling musician.