SPL Phonitor 2 headphone amplifier
SPL
Discontinued
This product can no longer be ordered
Specifications
Product features
- 19-inch rack size
- Not applicable
- Energy source
- AC
- Built-in equaliser
- No
- Talkback function
- No
Weight and dimensions including packaging
- Weight
- 5,0 kg
- Dimensions
- 54,0 x 38,0 x 19,0 cm
Product specifications
- high-end studio headphone amplifier
- suitable for all headphone systems and impedances from 10 Ohm
- speaker simulation via headphones
- monitoring alternative for studios and mobile units
- adjustment of centre point and stereo image
- large volume knob
- built-in monitor controller
- adjust volume via remote control (not included)
- compensation for difference in panning levels
- line inputs: 2x stereo XLR inputs, 1x stereo RCA input
- monitor/line output: stereo XLR output
- front-mounted headphone output
- voltage: 230 V, 50 Hz / 120 V, 60 Hz
- energy usage: max. 23.7 VA
- fuses (200-240 V): T 630 mA
- fuses (100-120 V): T 1 A
- dimensions: 12.6 x 4.4 x 13.4" (277 x 305 x 99 mm)
- weight: 9.5 lb (4.3 kg)
inputs:
- monitor output 1: 2x 3-pin XLR, balanced
- monitor output 2: 2x 3-pin XLR, balanced
- impedance: 20 kOhm symmetrical, ca. 10 kOhm asymmetrical
- maximum input level: : 32.5 dBu
- configuration: pin 1 = GND, pin 2 = positive (+), pin 3 = negative (-)
- monitor output 3: 2x RCA, unbalanced
- configuration: tip = positive, shield = GND
monitor/line outputs:
- connector: 2x 3-pin XLR, balanced
- frequency range (-3 dB): 4 Hz to 480 kHz
- CMR: -82 dBu
- crosstalk @ 1 kHz: -106 dB
- THD @ 1 kHz: 0.00085 %
- dynamic range: 134.37 dB
headphone output:
- connector: 1/4" (6.3mm) stereo jack (TRS)
- configuration: tip = left, ring = right, sleeve = GND
- impedance: 0.18 ohms
- frequency range (-3 dB): < 10 Hz tot > 480 kHz
- CMR: -106 dBu
- crosstalk @ 1 kHz: -106 dB
- THD @ 1 kHz: < 0.00091 %
- dynamic range: 133.62 dB
- max. output level (@ 1 kHz and 600 Ω): 65 mW (20 dBm)
- max. output level (@ 1 kHz and 40 Ω): 560 mW (20 dBm)
No alternatives found
Specifications
Product features
- 19-inch rack size
- Not applicable
- Energy source
- AC
- Built-in equaliser
- No
- Talkback function
- No
Weight and dimensions including packaging
- Weight
- 5,0 kg
- Dimensions
- 54,0 x 38,0 x 19,0 cm
Product specifications
- high-end studio headphone amplifier
- suitable for all headphone systems and impedances from 10 Ohm
- speaker simulation via headphones
- monitoring alternative for studios and mobile units
- adjustment of centre point and stereo image
- large volume knob
- built-in monitor controller
- adjust volume via remote control (not included)
- compensation for difference in panning levels
- line inputs: 2x stereo XLR inputs, 1x stereo RCA input
- monitor/line output: stereo XLR output
- front-mounted headphone output
- voltage: 230 V, 50 Hz / 120 V, 60 Hz
- energy usage: max. 23.7 VA
- fuses (200-240 V): T 630 mA
- fuses (100-120 V): T 1 A
- dimensions: 12.6 x 4.4 x 13.4" (277 x 305 x 99 mm)
- weight: 9.5 lb (4.3 kg)
inputs:
- monitor output 1: 2x 3-pin XLR, balanced
- monitor output 2: 2x 3-pin XLR, balanced
- impedance: 20 kOhm symmetrical, ca. 10 kOhm asymmetrical
- maximum input level: : 32.5 dBu
- configuration: pin 1 = GND, pin 2 = positive (+), pin 3 = negative (-)
- monitor output 3: 2x RCA, unbalanced
- configuration: tip = positive, shield = GND
monitor/line outputs:
- connector: 2x 3-pin XLR, balanced
- frequency range (-3 dB): 4 Hz to 480 kHz
- CMR: -82 dBu
- crosstalk @ 1 kHz: -106 dB
- THD @ 1 kHz: 0.00085 %
- dynamic range: 134.37 dB
headphone output:
- connector: 1/4" (6.3mm) stereo jack (TRS)
- configuration: tip = left, ring = right, sleeve = GND
- impedance: 0.18 ohms
- frequency range (-3 dB): < 10 Hz tot > 480 kHz
- CMR: -106 dBu
- crosstalk @ 1 kHz: -106 dB
- THD @ 1 kHz: < 0.00091 %
- dynamic range: 133.62 dB
- max. output level (@ 1 kHz and 600 Ω): 65 mW (20 dBm)
- max. output level (@ 1 kHz and 40 Ω): 560 mW (20 dBm)
Product information
Product no: 9000-0009-1911
General
Finally, a worthy monitor sound on your headphones with the Phonitor 2 from SPL. The high-end headphones preamp simulates the exact stereo studio sound on your headphones. You can adjust the centre point, the cross feed and the angle of the speaker. Next to that, the SPL Phonitor 2 can also be used as monitor controller, so you can switch between three audio sources.
Phonitor 2: suitable for every type of headphones
The SPL Phonitor 2 is suitable for every type of headphones with a high impedance sound full and powerful. It is optimized for headphones with an impedance of about 40 ohms. You can use any infrared remote control operate the headphone preamp, making it ideal for audiophiles who want to enjoy their music without getting up from their chair.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews (1)
Rating
Reviews from other countries
Videos
Downloads
Other products from SPL
Find all products of the brand SPL-
Bargain Buy -17%Recommended price £819 £683In stock Order before 10:00pm = receive it on Wednesday (free)
-
Popular -20%Recommended price £1,189 £955In stock Order before 10:00pm = receive it on Wednesday (free)
Alternative products by other brands
Search all products in category Headphone Amplifier-
Bargain Buy -35%Recommended price £327 £211In stock Order before 10:00pm = receive it on Wednesday (free)
-
Bargain Buy -44%Recommended price £338 £190In stock Order before 10:00pm = receive it on Wednesday (free)
-
🔥HOT & NEW Bargain Buy -17%Recommended price £1,109 £915In stock Order before 10:00pm = receive it on Wednesday (free)
-
Bargain Buy -23%Recommended price £297 £228In stock Order before 10:00pm = receive it on Wednesday (free)