▾

Audio Technica AT2035 set with ATH-M20x and IVA 08 XLR

Discontinued, this product can no longer be ordered.

No alternatives found

Not sure if the Audio Technica AT2035 set with ATH-M20x and IVA 08 XLR is for you? Do a Choice Check. Start Choice Checker

Product information
360° Photo
Reviews (125)
Downloads (2)

Audio Technica AT2035 set with ATH-M20x and IVA 08 XLR
Product no: 9000-0054-9918 Bax Music Warranty: Audio Technica AT2035 Studio Microphone This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty. Audio Technica ATH-M20x Studio Headphones This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty. Innox IVA 08 XLR Broadcast Microphone Stand This product comes with a 3-year warranty.

Specifications

1x Audio Technica AT2035 Studio Microphone
The Audio Technica AT2035 is a cardioid studio microphone for home and project studios. It offers great value for money, low self noise, high SPL and a natural sound.

Product features

Tube microphone	no
Microphone sensitivity (dBV/PA)	-33
Microphone impedance	100-149 ohms
Low-cut filter	yes
Maximum SPL	150 dB - 159 dB
Maximum frequency	20 - 20.9 kHz
Microphone accessories	shock mount, bag / box
Minimum frequency	20 - 21 Hz
Pad switch	yes
Polar pattern	cardioid
Stereo	no

Weight and dimensions including packaging

Weight (incl. packaging)	900 gr
Dimensions (incl. packaging)	25,0 x 24,5 x 7,0 cm

Product specifications

studio condenser microphone
type: large-diaphragm
pickup pattern: cardioid
frequency response: 20 Hz - 20 kHz
LF roll-off: 80 Hz (12 dB/octave)
sensitivity: -33 dB
impedance: 120 Ohms
maximum SPL: 148 dB (158 dB with -10 dB pad)
dynamic range: 136 dB
signal/noise ratio: 82 dB
phantom power supply 11 - 52 V / 3.8 mA
weight: 403 gr
length: 170mm
diameter: 52mm
included: AT8458 shockmount, screw thread adapter, carrying bag

1x Audio Technica ATH-M20x Studio Headphones
Audio Technica's ATH-M30 have a successor: the ATH-M20x. The X seems to stand for eXtra: great isolation, improved audio and a new design.

Product features

Active noise suppression	no
Wireless	no
Rotatable earpad	no
Headphone weight	190g
Headphone construction	closed
Headphone impedance	40-49 ohms
In/on/over ear	over-ear
Includes microphone	no
Design can be folded/dismantled	no
Adjustable bass boost	no
Removable cable	no
Cable length	> / = 300 cm
Colour	black
Maximum frequency	20 - 20.9 kHz
Minimum frequency	15 - 17 Hz
Audio connector	jack 3.5 mm TRS, jack 6.3 mm TRS
Volume control	no

Weight and dimensions including packaging

Weight (incl. packaging)	400 gr
Dimensions (incl. packaging)	26,0 x 19,0 x 10,0 cm

Product specifications

closed studio headphones
over-ear construction
driver diameter: 40 mm
magnet type: neodymium
frequency response: 15 Hz - 20 kHz
max. input power: 700 mW
sensitivity: 96 dB
impedance: 47 Ohms
cable length: 3 m
connector: 3.5mm mini jack
including adapter to 6.3 mm
weight: 190 g (excl. cable and connector)

1x Innox IVA 08 XLR Broadcast Microphone Stand
Equipped with an adjustable boom arm, the Innox IVA 08 is an indispensable tool for radio broadcasters and voice-over artists. This broadcast microphone stand comes complete with a table clamp, XLR cable and a stable base.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	not applicable
Boom arm	no
Height adjustable	not applicable
Colour	black
Stand material	steel
Maximum height of stand	not applicable
Included stand accessories	integrated cable (XLR)
Mininum stand height	not applicable
Podcast bundle	no
Screw thread size	5/8 inch
Set	no
Construction	not applicable
Accessory type	broadcast arm
Type of stand	broadcast stand
Type of stand base	not applicable
Type of vlogging accessory	microphone stand / clip

Weight and dimensions including packaging

Weight (incl. packaging)	2,0 kg
Dimensions (incl. packaging)	56,0 x 18,0 x 8,5 cm

Product specifications

microphone stand
ideal for broadcasting applications
can be adjusted in various ways for optimal positioning
two hinges with spring mechanism
with table clamp and stable base
colour: black
XLR microphone cable included
cable length: 350cm at the base, 30cm at the boom arm
boom arm length: 50 + 50 cm
minimal gauge table top for fastening clamp: 3mm
maximum gauge table top for fastening clamp: 55mm

A review can no longer be written about this item

Trevor Parsons April 21, 2020

Wrote the following about Audio Technica AT2035 Studio Microphone

I've a few Audio-Technica mics, the AT4040 and the 3035. The AT2035 for the price is an exceptional microphone. The frequency response is great, the high pass filter is on point and the pad is super useful.

There's even an included shockmount, you just can't go wrong with this mic for a project studio, where budgets are a key factor. Why pay for an over priced product, that does the exact same job?

Matt N May 8, 2019

Wrote the following about Audio Technica ATH-M20x Studio Headphones

Really good quality headphones. Sturdy construction, keep out plenty of outside noise. I wear mine for commentary at sporting events and they even cope with the PA system at Castleford. Comfortable fit, no sweaty-ear syndrome that you get with some big cans.

Mihai P. November 4, 2016

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

Good product easy to assemble the microphone into the stand and easy to use. Highly recommend!!

Steven F. November 20, 2015

Wrote the following about Audio Technica AT2035 Studio Microphone

For the money, you can't beat this. Crystal clear high quality mic.

Reviews from other countries

Translate all reviews into English View original reviews

Nick March 23, 2025

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

De arm werd geleverd met een montage om het in een bureau vast te maken, en een klemmontage. Meteen kreeg ik een goede indruk op de arm, en zodra ik hem had opgezet, wat nog geen 5 minuten duurde, vond ik het al heel goed.
Je kan de microfoon heel makkelijk krijgen waar je wilt. Het opzetten kostte geen moeite, en je hoeft geen externe kabel voor de microfoon te gebruiken, omdat er een in de arm zelf zit. Ook komt de arm niet in de weg, wat heel fijn is.
Ook goede kwaliteit, levering en service. 10/10

Arjan March 12, 2025

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

De arm wordt geleverd met zowel een vaste- als klembare tafel montage. Dat is erg prettig, want ik had niet zo'n zin om in mijn bureau te boren.
Met de klem montage zit de arm toch prima vast en kan ik hem eventueel nog eens verplaatsen als het nodig is.
Ik heb hem achter mijn schermen geplaatst en daar komt hij mooi overheen, dus hij is lang genoeg.
De geïntegreerde kabel is top, want het scheelt een hoop "zelf-wegwerken-werk".

wim March 28, 2024

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

mooie arm en goed te gebruiken om radio te kunnen maken

Seppe Merveille March 7, 2024

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

Goede kwaliteit en snelle levering

Hugo Franks Entertainment February 23, 2024

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

Gewoon een goed statief, doet wat het moet doen. Ik kan me niet vinden in eerdere reacties dat het statief zelf erg gammel in de houder staat. Wellicht is dit verbeterd? Het is erg stabiel en de kabel die al in het statief zit is een uitkomst, daar heb je geen last meer van. Gewoon een prima aankoop!

Eugene January 24, 2024

Wrote the following about Innox IVA 08 XLR Broadcast Microphone Stand

Helemaal blij mee!

Stevig statief voor een goeie prijs, en makkelijk in elkaar te zetten.

Overigens ook fijn dat je zelf kan kiezen of je het in je bureau/tafel wil schroeven of dat je er een klemmetje op wil zetten door de 2 bijgeleverde producten.

Show all 125 reviews