Showtec EventBAR 100IR wireless LED Bar

General

This LED bar is equipped with a battery and a module for wireless DMX. Its possibilities are endless! You won't need to run any long cables as the EventBAR 100IR does not require power or DMX cables. When the battery is fully charged, the lamp can produce light for up to six hours with all LEDs turned on. You can of course also use the LED bar in a conventional way. When the EventBAR 100IR is connected to mains electricity, it is automatically charged in approximately 4 hours.

EventBAR 100IR wireless: the technology

This LED bar is provided with 240 LEDs that are divided up into different colour sections: 96 red, 72 green and 72 blue LEDs. These LEDs let the EventBAR 100IR produce 16.7 million colours. This armature can operate in various modes, in which it is extremely flexible. Besides DMX, it can operate in stand-alone mode. In this mode you can set it to one colour or select one of the pre-programmed programs. When music-controlled, it can operate in a master as well as slave configuration. In this mode, the armature follows the beat of the music.

• Please note: the picture differs from the actual product.
• tip: optional UR-5 Universal Remote