Based on more than 21,240 customer reviews

Ayra Double Derby Pack lighting starter kit

Recommended price £171.60
£168 incl. 20% VAT
Online stock status:
Order now and receive delivery within approx. 5 weeks
Ayra Double Derby Pack lighting starter kit
Product no: 9000-0149-4694 Bax Music Warranty: Ayra TDC LED Derby Light Effect This product comes with a 3-year warranty. Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar This product comes with a 3-year warranty. Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m This product comes with a 3-year warranty.

General

The Derby effect is perhaps the most popular disco light of all time, and with good reason. It fills the room, moves to the music and provides plenty of colour. In this set, you get not one, but two Ayra TDC LED Derby lights. This provides a huge light output and allows you to cover the whole room from your tripod, from left to right.

Plug-and-play

Installation is simple: attach the two Derby's to the included Innox T-bar, swing up the tripod and connect the lights with the DMX cable. You don't need complicated controllers; set the lights to 'sound active' and they automatically dance along to the beat of the music. Want to expand later? Then these lamps are also simply controllable via DMX. An affordable and effective start for any party.

Specifications

Ayra TDC LED Derby Light Effect 2x Ayra TDC LED Derby Light Effect

The Ayra TDC LED Derby is an brilliantly priced light effect, equipped with a 9W RGB LED chip and sharp lenses. With four different operating modes including stand-alone and 5-channel DMX, this trusty derby is a great asset for any rig.

Product features

Number of DMX channels 5
Sustainable product not specified
Light source colour red, green, blue
Music operated yes
Light effect type derby
Battery operated (rechargeable) no

Weight and dimensions including packaging

Weight (incl. packaging) 4,0 kg
Dimensions (incl. packaging) 39,0 x 30,0 x 27,0 cm

Product specifications

  • LED derby light effect
  • creates numerous narrow, colourful, moving light beams
  • light source: RGB LED (9 W)
  • razor sharp lenses for intense light projection
  • each LED can be controlled separately
  • limited heat generation
  • low power consumption compared to halogen lights
  • built-in microphone for sound-controlled mode
  • stroboscope function
  • LED display with setting options
  • operating modes: automatic, sound-controlled, master/slave, DMX
  • DMX control via 3-pole XLR
  • number of DMX channels: 5
  • can be controlled via DMX512 protocol
  • mains voltage: 100 - 240 V AC, 50 / 60 Hz
  • link output for power daisy-chaining (IEC)
  • power cable included (Schuko - IEC)
  • power consumption: 20 W
  • dimensions: 325 x 270 x 240 mm
  • weight: 4 kg
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar 1x Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Packed with thoughtful, practical details, the Innox IVA01 LS kit completes any simple yet solid lighting set up with a heavy-duty stand and a T-bar.

Product features

Stand weight capacity 15 kg
Sustainable product not specified
Maximum height of stand 330 to 340 cm
Set no
Light stand type stand with T-bar

Weight and dimensions including packaging

Weight (incl. packaging) 6,3 kg
Dimensions (incl. packaging) 127,0 x 18,0 x 15,5 cm

Product specifications

  • lighting stand with T-Bar
  • safety bolts included for extra security
  • very stable
  • weight: 4.70 kg
  • min. height: 1250mm
  • max. height: 3300mm
  • T-bar length: 1200mm
  • max. load capacity: 15kg
  • tube diameter: 35mm
  • materials: steel with plastic couplers and screw mounts
  • T-bar mounted via bolts
Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m 1x Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m
Devine DMX50 Series cables are built to complete solid DMX lighting set-ups. This strong yet flexible 1.5 metre long problem-solver comes finished with highly reliable 3-pin XLR plugs and has a 110 Ohm resistance.

Product features

Sustainable product not specified
Length 1.50 m
Data plug type XLR 3-pin

Weight and dimensions including packaging

Weight (incl. packaging) 136 gr
Dimensions (incl. packaging) 20,0 x 19,0 x 3,5 cm

Product specifications

  • Devine DMX cable
  • connectors: 3-pin male XLR - 3-pin female XLR
  • impedance: 110 Ohms
  • length: 1.5m
  • colour: black
  • compatible with: DMX lighting controllers
  • isolation diameter: 1.6mm
  • isolation colours: red and white
  • number of conductors: 2
  • shielding: 100%
  • shielding material: aluminium foil
  • shielding dimensions: BC 16 x 4 x 0.12mm
  • inner conductor section: 0.23mm²
  • inner conductor: BC 20 x 0.12mm
  • cable diameter: 6mm
  • sheathing material: flexible PVC
  • operating temperature:
    • for fixed installations: -40°C to +80°C
    • mobile installation: - 25°C / + 70°C
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Additional to my previous review, the clamps that hold the tripod pole lift sections up, are very poor and don't clamp the pole itself at all allowing it to slip back down (this was not with a heavy load, but 4 simple compared LED lights), unless you depend on the through bolt to hold it, this means you have no option but to only allow it to go to heights determined by the hole spacings. I would not recommend this device at all
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Bought two units, one arrived with the crossbar bracket broken. Despite emailing customer support almost every day to get it replaced, five days later I have still not received any reply. Not the first time ive had issues with customer support from Max. very very poor replies. if this unit has arrived damaged, I don't hold out much hope for the longevity of the other one, as it appears to be of inferior quality
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Pretty robust for the money, though with a couple of oddities. The bolts used for hanging lights from the T-bar are a narrower gauge than those you find on most lighting hooks, etc, so may be incompatible with your other gear — in which case you'll have to use the bolts that come with the stand and nothing else. Also the bolt that you tighten to secure the T-bar on to the stand is surprisingly short — when you slacken it to lift the bar off the top of the stand there is a risk that the bolt will come all the way out of the nut that it screws into. If this happens the nut can fall out of the housing. More than once I've had to scrabble on the floor or scour the back of my car looking for it.
Ayra TDC LED Derby Light Effect

Wrote the following about Ayra TDC LED Derby Light Effect
Great little light, throws out good light and sound activated :)

Reviews from other countries

Translate all reviews into English

Ayra TDC LED Derby Light Effect

Wrote the following about Ayra TDC LED Derby Light Effect
Bon matériel mais la carte support des LEDs très mal faite. Obligé d'ouvrir les produits pour raccourcir les câbles qui empêchent les LEDs de tourner correctement.
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Stevig spul.
Er hangen nu 2 Ayra 60 led strobos en 2 Ayra derbys aan.
Meteen een draagtas bijbesteld.
Ayra TDC LED Derby Light Effect

Wrote the following about Ayra TDC LED Derby Light Effect
Exact wat ik zocht als aanvulling. Leuk licht effect!
Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m

Wrote the following about Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m
Prima kabel, doet exact wat het moet doen. Voelt degelijk en robuust aan.
Ayra TDC LED Derby Light Effect

Wrote the following about Ayra TDC LED Derby Light Effect
Als extra gekocht voor bij een feestje. Super tevreden. Heeft een breed bereik en mooie verlichting. Vooral i.c.m. een rookmachine is hij super mooi. Echt een goed product voor deze prijs!
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
De statieven zijn mooi stabiel en een fijne hoogte. Het plastic T stuk is niet heel sterk en kan na verloop van tijd breken! Kies voor een metalen T stuk daarmee voorkom je onnodige kosten voor reparatie of vervanging van je spots of andere fixtures. Naast extra kosten is veiligheid natuurlijk ook een belangrijke factor.

Other people also bought

  • Devine MIC100/10 XLR Microphone/Signal Cable, 10m

    Devine MIC100/10 XLR Microphone/Signal Cable, 10m

    £8.75
  • Devine MIC100/5 XLR Microphone/Signal Cable, 5m

    Devine MIC100/5 XLR Microphone/Signal Cable, 5m

    £7.50
  • Devine MIC100/3 XLR Microphone/Signal Cable, 3m

    Devine MIC100/3 XLR Microphone/Signal Cable, 3m

    £6.10
  • Devine MIC100/20 XLR Microphone/Signal Cable, 20m

    Devine MIC100/20 XLR Microphone/Signal Cable, 20m

    £17.55
  • Innox ALA G50 50mm G-Hook

    Innox ALA G50 50mm G-Hook

    £5.70
  • Innox ALA HC50 Truss Half Coupler

    Innox ALA HC50 Truss Half Coupler

    £8.75
  • Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

    Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

    £25
  • DAP FL09150 DMX XLR male - XLR female 3-pin 1.5 metres

    DAP FL09150 DMX XLR male - XLR female 3-pin 1.5 metres

    £5.85
  • Innox IVA Bridge Complete Lighting Bridge

    Innox IVA Bridge Complete Lighting Bridge

    £87
  • Ayra OSO 1612 DMX Scanmaster Controller

    Ayra OSO 1612 DMX Scanmaster Controller

    £64
  • Procab CAB470 schuko male – schuko female 5.00 metres

    Procab CAB470 schuko male – schuko female 5.00 metres

    £13.40
  • Innox SAF-BASIC-50S safety cable 3.2 mm 50 cm silver

    Innox SAF-BASIC-50S safety cable 3.2 mm 50 cm silver

    £5.25
  • Innox SAF-BASIC-30B safety cable 3.2 mm 30 cm black

    Innox SAF-BASIC-30B safety cable 3.2 mm 30 cm black

    £4.36
  • Ayra OSO Com 6 DMX Lighting Controller

    Ayra OSO Com 6 DMX Lighting Controller

    £40

Other products from Ayra

Find all products of the brand Ayra

Related products from Ayra

Find all products from the brand Ayra in the category Lighting Starter Sets
Compare your gear (1/10)