Ayra Moving Head Pack lighting starter kit

Ayra Moving Head Pack lighting starter kit
Product no: 9000-0149-4710 Bax Music Warranty: Ayra ERO 406 Moving Head This product comes with a 3-year warranty. Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar This product comes with a 3-year warranty. Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m This product comes with a 3-year warranty.

General

Want to make the step to professional moving light? This set of two Ayra ERO 406 moving heads offers you that possibility. These compact but powerful spots can turn in all directions and project a bright beam of light. Because the ERO 406 features RGBAW+UV LEDs, you can create beautiful colours, from deep purple (UV) to warm orange, in addition to fast movements.

Dynamic show

Moving light comes into its own best when you have multiple units. With these two heads on the supplied Innox stand, you create instant interaction. Let them cross each other, move synchronously or turn in opposite directions (pan/tilt inverse). With the included DMX cable you connect them to each other. Whether you use the built-in programmes or start programming yourself via DMX, with this set your show immediately looks a lot more expensive than it is.

Specifications

2x Ayra ERO 406 Moving Head
The ERO 406 by Ayra is a multi-functional LED moving head equipped with four 18-watt RGBAW + UV LEDs. It can be operated via DMX, sound-controlled or set to one of the various automatic programs.

Product features

Number of DMX channels	11, 15
Wireless DMX	no
Sustainable product	not specified
Gobo wheel	none
Light source colour	red, green, blue, white, UV, amber
Colour wheel	no
Music operated	yes
Moving head setup	separate moving head
Light source type	LED
Type of moving head	wash
Changeable gobos	no

Weight and dimensions including packaging

Weight (incl. packaging)	3,8 kg
Dimensions (incl. packaging)	73,0 x 68,0 x 49,0 cm

Product specifications

compact LED moving head
light source: 4x 18W RGBWA+UV LED
beam angle: 30°
LED display with menu buttons
various operation modes
automatic mode with 16 programs that are adjustable in speed in 9 steps
sound-controlled mode with adjustable sensitivity
master/slave mode (2 slave modes)
pan/tilt inverse option
DMX operation via 11 or 15 channels
light yield: 7800 lux @ 1m
separate mounting brackets including quick couplers
fuse: 3 A, 250V
power supply with IEC C13 input
4000Hz constant current LED driver
power consumption: 60 W
power supply: 90 - 240V AC, 50/60 Hz
dimensions: 195 x 135 x 235mm
weight: 2.75 kg

1x Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Packed with thoughtful, practical details, the Innox IVA01 LS kit completes any simple yet solid lighting set up with a heavy-duty stand and a T-bar.

Product features

Stand weight capacity	15 kg
Sustainable product	not specified
Maximum height of stand	330 to 340 cm
Set	no
Light stand type	stand with T-bar

Weight and dimensions including packaging

Weight (incl. packaging)	6,3 kg
Dimensions (incl. packaging)	127,0 x 18,0 x 15,5 cm

Product specifications

lighting stand with T-Bar
safety bolts included for extra security
very stable
weight: 4.70 kg
min. height: 1250mm
max. height: 3300mm
T-bar length: 1200mm
max. load capacity: 15kg
tube diameter: 35mm
materials: steel with plastic couplers and screw mounts
T-bar mounted via bolts

1x Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m
Devine DMX50 Series cables are built to complete solid DMX lighting set-ups. This strong yet flexible 1.5 metre long problem-solver comes finished with highly reliable 3-pin XLR plugs and has a 110 Ohm resistance.

Product features

Sustainable product	not specified
Length	1.50 m
Data plug type	XLR 3-pin

Weight and dimensions including packaging

Weight (incl. packaging)	136 gr
Dimensions (incl. packaging)	20,0 x 19,0 x 3,5 cm

Product specifications

Devine DMX cable
connectors: 3-pin male XLR - 3-pin female XLR
impedance: 110 Ohms
length: 1.5m
colour: black
compatible with: DMX lighting controllers
isolation diameter: 1.6mm
isolation colours: red and white
number of conductors: 2
shielding: 100%
shielding material: aluminium foil
shielding dimensions: BC 16 x 4 x 0.12mm
inner conductor section: 0.23mm²
inner conductor: BC 20 x 0.12mm
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature:
- for fixed installations: -40°C to +80°C
- mobile installation: - 25°C / + 70°C

Write a review

David Thomson November 21, 2022

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Additional to my previous review, the clamps that hold the tripod pole lift sections up, are very poor and don't clamp the pole itself at all allowing it to slip back down (this was not with a heavy load, but 4 simple compared LED lights), unless you depend on the through bolt to hold it, this means you have no option but to only allow it to go to heights determined by the hole spacings. I would not recommend this device at all

David Thomson November 21, 2022

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Bought two units, one arrived with the crossbar bracket broken. Despite emailing customer support almost every day to get it replaced, five days later I have still not received any reply. Not the first time ive had issues with customer support from Max. very very poor replies. if this unit has arrived damaged, I don't hold out much hope for the longevity of the other one, as it appears to be of inferior quality

Simon H. June 29, 2020

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Pretty robust for the money, though with a couple of oddities. The bolts used for hanging lights from the T-bar are a narrower gauge than those you find on most lighting hooks, etc, so may be incompatible with your other gear in which case you'll have to use the bolts that come with the stand and nothing else. Also the bolt that you tighten to secure the T-bar on to the stand is surprisingly short when you slacken it to lift the bar off the top of the stand there is a risk that the bolt will come all the way out of the nut that it screws into. If this happens the nut can fall out of the housing. More than once I've had to scrabble on the floor or scour the back of my car looking for it.

Reviews from other countries

Translate all reviews into English View original reviews

Victor e. May 22, 2026

Wrote the following about Ayra ERO 406 Moving Head

top product super makkelijk te plaatsen en te gebruiken !

Eric March 12, 2026

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Stevig spul.
Er hangen nu 2 Ayra 60 led strobos en 2 Ayra derbys aan.
Meteen een draagtas bijbesteld.

Lucas December 5, 2025

Wrote the following about Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m

Prima kabel, doet exact wat het moet doen. Voelt degelijk en robuust aan.

Marc B October 7, 2025

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

De statieven zijn mooi stabiel en een fijne hoogte. Het plastic T stuk is niet heel sterk en kan na verloop van tijd breken! Kies voor een metalen T stuk daarmee voorkom je onnodige kosten voor reparatie of vervanging van je spots of andere fixtures. Naast extra kosten is veiligheid natuurlijk ook een belangrijke factor.

Gérard C. August 27, 2025

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Ben zeer tevreden met dit statief van Innox.
Kan hem ver omhoog uitschuiven voor licht mooi van boven te laten werken.
Hij staat stevig.
Alleen jammer dat het niet meteen met draagtas compleet wordt verkocht voor een nette prijs.

Gérard C. August 26, 2025

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar