QSC E215 passive full-range

no reviews yet

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
Reviews (0)
News and items (1)

QSC E215 passive full-range
Product no: 9000-0031-9867 Bax Music Warranty: This product comes with a 3-year warranty.

General

If you're looking for a single speaker to provide music at your upcoming party, QSC offers the E215. It's a passive full-range speaker with two 15-inch woofers and 1000 Watts of power. This trapezoid-shaped 2-way system features frequency-shading topology that means the woofers provide both high and low frequencies in a full-range system without any clipping. As a result, it delivers sturdy bass tones while keeping the high tones intact and sending them over longer distances thanks to a 2.8-inch compression driver.

Passive with more

Even though the E215 is a passive speaker, this black cabinet is more than meets the eye. When connected to a GXD or PLD QSC amplifier, or one of the TouchMix mixers, you'll have even more functions at your fingertips, not to mention advanced signal processing and DSP tunings. This means you can adjust your speakers optimally for a DJ, a band or another application. Placement is no problem either—you can set it upright, at an angle for use as a monitor, or suspended either horizontally or vertically by means of the M10 rigging points. Finally, transporting this speaker is made manageable by means of the two integrated aluminium handles.

Specifications

Product features

Mid driver/woofer diameter	2 x 15 inches
Tweeter diameter	2.8 inches
Sensitivity	98 dB
Weight per speaker	90 kg
Installation speaker / 100 V	no
Maximum SPL	130 dB - 139 dB
Maximum frequency	20 - 20.9 kHz
Minimum frequency	35 - 39 Hz
Nominal impedance	4 ohms
Peak power in watts	> 3,000 watts
RMS capacity in watts	1,000 - 1,249 W
Set	no

Weight and dimensions including packaging

Weight (incl. packaging)	100,0 kg
Dimensions (incl. packaging)	100,0 x 50,0 x 50,0 cm

Product specifications

QSC E215 passive full-range
2-way system
titanium diaphragm
advanced processing with QSC’s GXD, PLD amplifiers or TouchMix mixers
technical information
- power capacity: 1000 W (RMS; 2x 500 W), 4000 W (peak)
- frequency response: 39 Hz - 20 kHz
- max SPL: 134 dB
- crossover: 1.8 kHz
- dispersion: conical DMT, 75°
connectors:
- 2x 4-pin SpeakON (parallel)
- speaker wire clamps
cabinet:
- material: 11-layer plywood
- colour: black
- finish: scratch-proof textured paint
- 6x M10 rigging points
- 2x integrated aluminium handle
- weight: 91 g

More Bass with QSC K Cardioid Subwoofer and E Series

Thursday 12 January 2017 By Lizanne

With a regular subwoofer, you can often lose low tones. QSC has found the solution to that problem and named it the K Cardioid. They plan to officially launch this active sub at the 2017 NAMM show next week. It has a cardioid directional pattern at its core which effectively prevents low frequencies from escaping via the rear or sides of the cabinet, resulting in more bass and a higher sound pressure level!