LD Systems ANNY 10 BPH B6 Accu PA speaker set with headset (

LD Systems ANNY 10 BPH B6 Accu PA speaker set with headset (655 - 679 MHz)
Product no: 9000-0152-3885 Bax Music Warranty: This product comes with a 3-year warranty.

General

With the LD Systems ANNY 10 BPH B6, you'll be ready for performances, presentations and sports lessons at any venue. This portable active 10-inch PA speaker runs on battery power and has a 6-channel mixer with 3-band EQ and effects such as reverb and delay. Stream music via Bluetooth 5.0 or pair two ANNYs via TWS for stereo. The set comes with an ANNY R B6 receiver module, ANNY BP B6 bodypack and WS 100 MH 1 headset microphone (655-679 MHz).

Specifications

Product features

Sustainable product	not specified
Built-in light/laser effect	no
Included microphone	headset
Wheels + extendable handle	yes
RMS power in watts	50 - 99 W
Weight	15 - 19.9 kg
Battery included	yes
Playback options	Bluetooth, line in
Battery life (approx.)	21-30 hours
Splash-proof	not specified
Stand-mountable	yes
Analogue audio input type	unbalanced line in (RCA), unbalanced stereo line in (TRS mini-jack), microphone input (XLR)
Analogue audio output type	balanced line out (XLR)

Weight and dimensions including packaging

Weight (incl. packaging)	16,3 kg
Dimensions (incl. packaging)	59,0 x 37,0 x 35,0 cm

Product specifications

product type: portable active 2-way battery PA speaker set
set contents: 1x ld systems anny 10, 1x ld systems anny r b6 receiver module, 1x ld systems anny bp b6 bodypack transmitter, 1x ld systems ws 100 mh 1 headset microphone
batteries supplied: 2x 1.5 v aa/lr6 (for bodypack)
wireless frequencies (set/b6): 655 - 679 mhz
spread angle: hor. 120° / vert. 60°
colour: black
weight (total): 18.4 kg
speaker type: active
peak power: 160 w
rms power: 80 w
amplifier class: class d
max. spl peak (sine burst, fullspace/1 m, thd≤10%): 118 db
max. spl average (sine burst, bw, fullspace/1 m, thd≤10%): 111 db
frequency response speaker (-10 db, rel. avg): 45 - 20,000 hz
crossover frequency: 1800 hz
number of inputs: 5
input type(s): 3.5 mm jack trs female
number of outputs: 1
output type(s): xlr 3-pole male
protections: short circuit, overheating
bluetooth version: bluetooth 5.0
bluetooth features: audio streaming (a2dp), truewireless™ stereo
bluetooth range: ≤10 m (class 2)
supported bluetooth codecs: sbc, aac
receiver (client): yes
number of mic/line inputs: 2
mic/line connector: xlr combo socket
number of line inputs: 2
line-in connector: rca female
number of music inputs: 1
music input connector: 3.5 mm jack trs female
output signal: balanced
number of line-outs: 1
line out connector: xlr 3-pin male
mixer: yes
audio processing: 3-band eq (high, mid, low), delay line, presets
speaker size: 10"
woofer outer diameter: 254 mm
woofer magnet: ferrite
woofer voice coil: 2"
tweeter size: 1"
tweeter magnet: ferrite
tweeter voice coil: 1 mm
mains voltage: 100 - 240 v ac / 50 - 60 hz
power supply type: switched-mode power supply (smps)
power consumption: 150 w
mains connection: iec c14 plug male
mains fuse: t2al/250 v
battery technology: lead-acid battery
battery: exchangeable
battery voltage: 12 v
battery capacity: 5,000 mah
battery life: 5 h (music) - 25 h (eco)
charging time (100%): 7 h
charging time (80%): 3.5 h
cabinet design: bass reflex
number of handles: 3
tripod lens: 36 mm (0°/5°)
cabinet material: polypropylene
front grille material: aluminium
ambient temperature: 0 - 40 °c
maximum humidity (non-condensing): 80%
dimensions speaker (w x h x d): 361 x 566 x 300 mm
speaker weight: 18 kg
included: mains cable
receiver module compatibility: suitable for ld systems anny®
receiver module material: sheet steel
receiver module finish: powder coated
receiver module wireless frequencies: 655 - 679 mhz
receiver module frequency response (-3 db, rel. avg): 50 - 17,000 hz
receiver module colour: black
receiver module number of channels: 12
receiver module antenna connector: bnc female
receiver module antennas: bnc female
receiver module dimensions (w x h x d): 72.8 x 39.6 x 118.5 mm
bodypack compatibility: for ld systems anny® wireless systems (b6 band)
bodypack wireless frequencies: 655 - 679 mhz
bodypack frequency response (-3 db, rel. avg): 45 - 20,000 hz
bodypack colour: black
bodypack number of channels: 12
bodypack transmission power: 10 mw
bodypack antenna: 1 (fixed)
bodypack input connector: mini xlr male
bodypack minimum signal-to-noise ratio (snr): 100 db
bodypack power supply: 2x 1.5 v aa/lr6 (up to max. 8 h)
bodypack dimensions (w x h x d): 64 x 100 x 21 mm
bodypack weight: 9 g
headset directivity: cardioid
headset capsule: capacitor
headset rated impedance: 680 ω
headset sensitivity (transfer factor): 6.31 mv/pa
headset phantom power: 5 v
headset connection: mini xlr female
headset cable length: 1 m
headset material: abs
headset frequency response (-6 db, rel. avg): 100 - 12,000 hz
headset colour: black
headset weight: 49 g