Dynacord PowerMate 1000-3 Mixer

Sustainable product	not specified
RMS power (4 ohms)	2x 1,000 W
RMS power (8 ohms)	2x 600 W
built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
number of mono channels	4
number of stereo channels	4
number of microphone inputs	5 - 8
panning per channel	yes
compressor on the inputs	no
Equalizer	3-band, Master EQ
number of auxiliaries	1 - 2
built-in effects	yes
number of submasters	none

volume control	faders
type of mixer inputs	microphone input (XLR), balanced line input (TRS jack), unbalanced line input (RCA)
type of mixer outputs	balanced line output (XLR), balanced line output (TRS jack), unbalanced line output (RCA), stereo headphone output (TRS jack or mini jack), lockable speaker output
Connector position	top and back
19 inches	19-inch rack mount (not included)
Mixer power	power cable
Headphone output	~
Inputs	~
built-in audio player	~
Built-in audio interface	~
Phantom power	~
Built-in mixer effects	~
type of mixer	~

Sustainable product	not specified
RMS power (4 ohms)	~
RMS power (8 ohms)	~
built-in protection	~
number of mono channels	12
number of stereo channels	4
number of microphone inputs	9 - 12
panning per channel	~
compressor on the inputs	~
Equalizer	~
number of auxiliaries	5 - 6
built-in effects	yes
number of submasters	none

volume control	knobs, faders, faders + knobs
type of mixer inputs	microphone input (XLR), balanced line input (TRS jack)
type of mixer outputs	balanced line output (XLR), balanced line output (TRS jack)
Connector position	~
19 inches	no
Mixer power	~
Headphone output	yes
Inputs	yes, only mono channels
built-in audio player	no
Built-in audio interface	USB (4x4 I/O)
Phantom power	yes
Built-in mixer effects	reverb/delay/modulation, master EQ
type of mixer	studio / PA mixer

Dynacord PowerMate 1000-3 Mixer
Product no: 9000-0031-5970 Bax Music Warranty: This product comes with a 3-year warranty.

General

If you're after a versatile compact mixer, then the third-generation Dynacord PowerMate 1000-3 with built-in amplifier is an ideal option! First of all, you won't need an external amplifier to drive your passive speakers. With 2x 1000 Watts of power at your disposal, you've got plenty of output to send an awesome band mix over the PA. Add the digital audio interface and four USB channels to that, and you've got a recording setup as well!

Plug and Play!

The PowerMate 1000-3 boasts ten mic/line inputs, the last four of which can be used as stereo. In terms of outputs, there are more options than you'll know what to do with! Choose between three outputs for your speakers (SpeakOn, XLR and jack), six insert connections for your mono channels and another two FX and AUX sends. There's also a MIDI input/output on the rear and more than a hundred effects you can fine-tune to perfection!

Specifications

Product features

19 inches	19-inch rack mount (not included)
Number of auxiliaries	5 - 6
Number of microphone inputs	9 - 12
Number of mono channels	10
Number of stereo channels	4
Number of submasters	none
Compressor on the inputs	no
Sustainable product	not specified
Equalizer	3-band
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in effects	yes
Panning per channel	yes
Connector position	top and back
RMS power (4 ohms)	2x 1,000 W
RMS power (8 ohms)	2x 600 W
Type of mixer inputs	microphone input (XLR), balanced line input (TRS jack), unbalanced line input (RCA)
Type of mixer outputs	balanced line output (XLR), balanced line output (TRS jack), unbalanced line output (RCA), stereo headphone output (TRS jack or mini jack), speaker output (TS jack), lockable speaker output
Mixer power	power cable
Volume control	faders + knobs

Weight and dimensions including packaging

Weight (incl. packaging)	17,1 kg
Dimensions (incl. packaging)	64,0 x 57,0 x 25,5 cm

Product specifications

Dynacord PowerMate 1000-3 mixer
- Class-D amplifier
- output capacity: 2x 1000 W (4 Ohms), 2x 600 W (8 Ohms), 2x 1350 W (2.66 Ohms)
connectors:
- 10x channels
- 10x mic connections (XLR)
- 10x line connections (jack, 4x stereo)
- 6x inserts (jack)
- 4x outputs (XLR, jack, SpeakOn on rear)
- 6x FX/AUX/Mon (jack)
- 4x RCA connections
- USB port
- MIDI I/O (5-pin DIN)
- lamp output (12V DC)
- footswitch: jack
- headphone: jack
- power cable (rear)
digital audio interface
- 4x I/O
- 24-bit AD/DA conversion
- sampling rate: 44.1 / 48 / 88.2 / 96 kHz
lo-cut on mono channels (80 Hz)
voice filter on mono channels
graphic stereo equalizer
feedback filter on mono channels
+48V phantom power
dual stereo 24/48-bit multi-effects processor
100x standard presets, 20 adjustable
tap delay
128 x 64 OLED display
technical info:
- frequency response: 15 Hz - 70 kHz
- crosstalk: 1 kHz
- THD: >0.005%
- noise: -97 dB
- S/N ratio: 105 dB
dimensions (BxDxH): 443.7 x 483 x 135 mm (without cover), 510.5 x 571.5 x 164.5 mm (with cover)
weight: 12.5 kg (without cover), 14 kg (with cover)
included: cover, user manual, power cable, DVD with USB driver

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Marcel Romeo L. January 3, 2026

Wrote the following about Dynacord PowerMate 1000-3 Mixer

I recently purchased a Dynacord PowerMate 3 online from Bax Music. Unfortunately, I encountered a serious problem with the internal effects.
The FX1 and FX2 do not work correctly when changing programs. Even though the display shows that the program has been changed (for example from 5-55 to 5-59 or from bank 5 to bank 6), the effects immediately return to the default program 5-55. The screen indicates a change, but the sound does not follow.
At first, I thought the unit was defective, so I returned it. Today, I received a brand new replacement unit, which I tested together with the staff in the Bax Music store. Unfortunately, the exact same problem occurred on the new unit as well.
Because this issue happens on multiple units and directly affects live use, I cannot rely on this mixer for professional work. For this reason, I do not recommend this product.