Discontinued, this product can no longer be ordered.
Not sure if the JZ Microphones BT201/1 condenser microphone is for you? Do a Choice Check.
Start Choice Checker
JZ Microphones BT201/1 condenser microphone
Product no: 9000-0022-0859
Bax Music Warranty:
This product comes with a 5-year warranty.
General
A unique feature of this BT201/1 small-diaphragm microphone by JZ Microphones is that its capsules are interchangeable. This enables you to quickly change the directional characteristic of your mic, depending on the situation. You can choose between omnidirectional, open cardioid or open cardioid with an attenuation of -20 dB. What's more, the BT201 series mic has a unique shape that was designed to optimally capture the audio source with whichever pickup pattern you choose. The -20 dB attenuation is especially handy when you want a low signal without sacrificing any low or high frequencies. Normally, there would be a switch on the microphone to do this, but with the BT201, JZ Microphones opted for interchangeable capsules to get the job done.
JZ Microphones
All JZ Microphones are made with class A electronics and components that are crafted and tested by hand, resulting in a pure audio signal before it even reaches your recording equipment. On top of that, electronics that are soldered by hand are resistant to overheating. At this time, JZ's Vintage series microphones do not have tubes. The internal circuitry is designed to function perfectly without them but able to emulate the characteristic sound of a tube mic. These mics don't contain any converters either, which makes them virtually noise-free.
Specifications
Product features
| Microphone sensitivity (dBV/PA) |
-39 |
| Microphone impedance |
200-249 ohms |
| Low-cut filter |
no |
| Maximum SPL |
130 dB - 139 dB |
| Maximum frequency |
19 - 19.9 kHz |
| Microphone accessories |
case |
| Minimum frequency |
20 - 21 Hz |
| Pad switch |
no |
| Polar pattern |
cardioid |
| Stereo |
no |
| Interchangable capsules |
yes |
Weight and dimensions including packaging
| Weight (incl. packaging) |
800 gr |
| Dimensions (incl. packaging) |
28,0 x 12,0 x 7,0 cm
|
Product specifications
- small-diaphragm condenser microphone
- microphone type: electrostatic
- operation: pressure gradient
- diaphragm diameter: 13 mm
- frequency range: 20 Hz - 20 kHz
- pickup pattern: cardioid, open cardioid, open cardioid -20 dB, omnidirectional
- output impedance: 50 ohms
- load impedance: > 1000 ohms
- recommended load impedance: > 250 ohms
- signal-to-noise ratio CCIR 468-3 weighted: 71 dB
- signal-to-noise ratio DIN/IEC 651: 82 dB-A
- equivalent noise ratio DIN/IEC: 6 dB-A
- maximum SPL for 0.5% THD at 1000 ohms load: 140 dB
- dynamic range of mic preamp: 128 dB
- phantom power on 2 and 3-pin XLR: +48 V (+/- 4 V)
- power consumption: 2 mA
- output connector: 3-pin XLR, gold-plated contact points
- dimensions: 161.5 x 24 mm
- weight: 140 g (including magnetic head)