- Home /
- Pro Audio /
- Speaker Systems /
- Devine /
- Devine 2x Artis 12 passive + D-600 + accessories
Devine 2x Artis 12 passive + D-600 + accessories
Discontinued, this product can no longer be ordered.
Product no: 9000-0014-5059 Bax Music Warranty: Devine Artis 12 300W Passive Speaker This product comes with a 3-year warranty. Devine D-600 Class-D Amplifier, 2x 300W at 8 Ohms This product comes with a 3-year warranty. Innox IVA03 Speaker Stands with Bag (Set of 2) This product comes with a 3-year warranty. Devine SPE15/10 10-Metre Speaker Cable, 2x1.5mm This product comes with a manufacturing defects warranty.
General
This speaker set is perfect for DJs who are just starting out. The set consists of a powerful Devine D-600 class D amplifier (2x 540 watts), two Devine Artis 12 passive speakers (300 watts each), two Devine SPE15/10 10-metre long speaker cables, and the Innox IVA03 speaker stand kit with bag. Now all you need to decide on is what music you want to play and you're good to go.
D-600: small amp with a big sound
This class D amplifier might be lightweight, but it's also powerful. Instead of traditional transformers, this amp uses a clever, switched-mode power supply that keeps its weight light. An added advantage of this is that more power can be supplied when needed, or switched to a lower level when less power is required. The D600 can operate, therefore, at 2x 540 watts at 4 ohms or 1x 1,080 watts at 8 ohms. A switched mode power supply also mean less heat is generated. Because of this, it only has two small fans that are virtually silent.
Artis 12: complete speaker
You can't do much with an amplifier on its own. Fortunately, this set also comes with two Devine Artis 12's. These passive speakers have an output of 300 watts, and are fitted with a 12-inch woofer for the bass and a PH-04 tweeter with a 1.34-inch exit. They are suitable for music, as well as vocals and speech. For easy transport, the speakers have a handle on the side. The 35-mm tripod flanges allow you to mount the speakers on the included Innox IVA03 speaker stands securely. The
Tips or comments about this product- Devine Artis 12 speakers also come with monitor feet. Finally, you can connect everything together using the included Devine SPE15/10 speaker cables.
Specifications
2x Devine Artis 12 300W Passive Speaker
Armed with a 12-inch woofer and 1.34-inch tweeter, the Devine Artis 12 is ready to be deployed for background music, speech or vocals, but it'll also serve dutifully as a passive satellite speaker in a full-range PA system.
Product features
| Mid driver/woofer diameter | 12 inches |
|---|---|
| Tweeter diameter | 1 inch |
| Sustainable product | not specified |
| Sensitivity | 96 dB |
| Weight per speaker | 12 kg |
| Installation speaker / 100 V | no |
| Speaker cabinet material | plastic |
| Maximum SPL | not specified |
| Maximum frequency | 18 - 18.9 kHz |
| Minimum frequency | 50 - 59 Hz |
| Nominal impedance | 8 ohms |
| Peak power in watts | 750 - 999 watts |
| RMS capacity in watts | 200 - 349 W |
| Set | no |
| Speaker connection | locking speaker |
Weight and dimensions including packaging
| Weight (incl. packaging) | 14,8 kg |
|---|---|
| Dimensions (incl. packaging) | 71,0 x 49,0 x 41,0 cm |
Product specifications
- Devine Artis 12
- 12-inch passive speaker
- rugged, lightweight synthetic housing
- woofer: 12-inches
- tweeter: PH-04 with 1.34-inch exit
- nominal power: 300 Watt RMS (750 Watt peak power)
- impedance: 8 Ohms
- handle on the side
- 35mm stand flange with locking screw
- connection: locking speaker input and output
- monitor feet included
- frequency range: 50 to 18,000 Hz (-10 dB)
- sensitivity: 96 dB (+/- 2 dB)
- dimensions (WxDxH): 420 x 310 x 585mm
- weight: 12.4 kg
- included: monitor feet
1x Devine D-600 Class-D Amplifier, 2x 300W at 8 Ohms
The Devine D-600 amplifier is able to deliver 2x 540 Watts at 4 Ohms from a housing that measures just 1U high. This beefy yet lightweight amp is built for mobile, on-the-road rigs.
Product features
| 19-inch rack size | 1U |
|---|---|
| 2-ohm compatible | no |
| Number of amplifier channels | 2 |
| Audio loop output | no |
| Bridge mode | yes |
| Input | jack (6.3 mm stereo), XLR |
| Built-in filter | none |
| Built-in protection | overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator |
| Built-in DSP processor | no |
| Cooling | ventilator |
| RMS power (4 ohms) per channel | 500 - 599 watts |
| RMS power (at 8 Ohms) per channel | 300 - 349 Watts |
| Amplifier class | D |
| Amplifier output | locking speaker connector |
| Equipped with crossover | no |
Weight and dimensions including packaging
| Weight (incl. packaging) | 3,2 kg |
|---|---|
| Dimensions (incl. packaging) | 48,3 x 16,0 x 4,4 cm |
Product specifications
- class D amplifier
- power capacity:
- 2x 540W 4 Ohm stereo output (RMS)
- 2x 300W 8 Ohm stereo output (RMS)
- 1x 1080W 8-ohm stereo output (RMS)
- frequency range: 20 - 20,000Hz
- minimum channel impedance: 4 Ohms
- input sensitivity: 1V
- input impedance (balanced): 20 kOhms
- input impedance (unbalanced): 10 kOhms
- S/N ratio (A-weighted): 100dBA
- total harmonic distortion (THD): 0.05%
- damping factor @ 1 kHz, 8 Ohm: >200
- slew rate: 20V/uS
- built-in protection: soft start, direct current, short circuit, limiter, overheat
- cooling: temperature-controlled fans, heatsinks, ventilation slots
- inputs: balanced XLR and 6.35mm TRS jack plug, stereo inputs
- outputs:
- 2x black locking speaker outputs
- 1x red speaker lock output for bridge mode
- input voltage: 115/230V AC, 50/60Hz
- stand-by-use: <1W
- size: 19-inch, 1U
- dimensions: 483 x 44 x 160mm
- weight: 3.2 kg
1x Innox IVA03 Speaker Stands with Bag (Set of 2)
This solid set of two speaker stands come complete with a bag, and since the stands have been TUV approved, they can take a maximum load of 25kg each.
Product features
| Number of stands | 2 |
|---|---|
| Stand weight capacity | 25 kg |
| Sustainable product | not specified |
| Weight per stand | 2 to 4 kg |
| Colour | black |
| Stand material | metal |
| Maximum height of stand | 180 to 190 cm |
| Included stand accessories | bag |
| Mininum stand height | 110 to 120 cm |
| Shock absorption system | no |
| Set | yes |
| Type of base | tripod |
| Stand mount | 35mm flange |
| Wind-up mechanism | no |
Weight and dimensions including packaging
| Weight (incl. packaging) | 7,5 kg |
|---|---|
| Dimensions (incl. packaging) | 100,5 x 21,5 x 12,5 cm |
Product specifications
- set consists of 2 stands and 1 practical carry bag
- maximum load: 25kg each
- tube diameter: 35mm
- height: 1.2 - 1.8m
- dimensions (folded): 97cm
- weight: 4.4kg
- material: metal
- finish: satin black powder coating
2x Devine SPE15/10 10-Metre Speaker Cable, 2x1.5mm
Chances are, you'll need a speaker cable sooner or later, so you might as well keep one or more handy in your cable case! Attractively-priced, the Devine SPE15/1.5 offers dependable, interference-free signal transfer.
Product features
| Number of cores | 2 |
|---|---|
| Conductor diameter | 1.5 mm2 |
| Sustainable product | not specified |
| Length | 10.00 m |
| Male/female | female - female |
| Audio connector | lockable speaker connector 4p |
Weight and dimensions including packaging
| Weight (incl. packaging) | 1,3 kg |
|---|---|
| Dimensions (incl. packaging) | 39,5 x 13,0 x 5,0 cm |
Product specifications
- speaker cable
- connector 1: locking speaker connector (4SPP)
- connector 2: locking speaker connector (4SPP)
- high signal quality
- cable type: 2x 1.5 mm²
- suitable for a power capacity of up to 500 watts (PA)
- length: 10m
- colour: black
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
Wrote the following about Devine D-600 Class-D Amplifier, 2x 300W at 8 Ohms
Does this compare to a QSC or a Crown? No, not at all, but neither of them do a sub-£200 amplifier. If you want a decent amp and don't have a lot of money to spend, I really don't think you can go far wrong.
So why the loss of one star? The frequency response of these amplifiers seems somewhat unpredictable across the audio spectrum when they're bridged. So with that in mind; if you need an amplifier that delivers 1000W per channel into an 8ohm load (full range) I don't think this amplifier is for you...
Wrote the following about Devine D-600 Class-D Amplifier, 2x 300W at 8 Ohms
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
Reviews from other countries
Translate all reviews into English View original reviews
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
De Innox IVA03 standaards zijn verrassend stabiel voor de prijs en makkelijk in hoogte verstelbaar. Ze voelen degelijk genoeg aan voor regelmatig gebruik en de meegeleverde draagtas maakt transport en opslag een stuk makkelijker. Ideaal als je een budget-oplossing zoekt voor PA-tops of monitors — doet gewoon wat ‘ie moet doen zonder gedoe
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
Wrote the following about Innox IVA03 Speaker Stands with Bag (Set of 2)
| Description | Type | Language | Extension |
|---|---|---|---|
| Handleiding Artis 12 speaker | Manual | Unknown | |
| Handleiding D-600 versterker | Manual | Unknown | |
| Devine Artis 12 Handleiding | Manual | Dutch, English | |
| Devine Artis 12 Declaration of Conformity EMC_LVD | Manual | Unknown | |
| Devine Artis 12 Declaration of Conformity RoHS | Manual | Unknown | |
| Devine Artis 12 Handleiding V4 | Manual | Dutch, English | |
| Devine SPE15/10 Declaration of Conformity | Manual | Unknown | |
| Devine D-600 Declaration of Conformity | Unknown | ||
| Devine D-600 (D-series) user manual (V4) | Manual | Unknown |