▾

JB systems Bax Advised speaker set 5

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
Reviews (104)
Downloads (1)

JB systems Bax Advised speaker set 5
Product no: BA-800123 Bax Music Warranty: JB systems TSX 15 passive speaker cabinet This product comes with a 3-year warranty. DAP Palladium P-1200 Vintage amplifier This product comes with a 3-year warranty. Devine SPE25/10 10-Metre Speaker Cable, 2x2.5mm This product comes with a manufacturing defects warranty.

General

We have comprised this simple set for durable, affordable amplification on a small location. Think of a medium-sized stage, a starting mobile DJ show or a small Mardi Gras float. The set consists of two JB Systems 15-inch full-range speakers, a DAP amp and the cables needed to connect these components. Plug in your mixer and you are good to go!

Specifications

2x JB systems TSX 15 passive speaker cabinet

Great speaker cabinet for starting DJs. This speaker is ideal for over 250 watts of music power.

Product features

Mid driver/woofer diameter	15 inches
Tweeter diameter	1 inch
Sensitivity	90 dB
Weight per speaker	22 kg
Installation speaker / 100 V	no
Maximum SPL	110 dB - 119 dB
Maximum frequency	20 - 20.9 kHz
Minimum frequency	50 - 59 Hz
Nominal impedance	8 ohms
Peak power in watts	500 - 749 watts
RMS capacity in watts	200 - 349 W
Set	no

Weight and dimensions including packaging

Weight (incl. packaging)	20,0 kg
Dimensions (incl. packaging)	69,0 x 48,5 x 43,5 cm

Product specifications

trapezoid sound box
15-inch woofer and 1-inch titanium super tweeter
capacity: 250 watts
8 ohms
nice finish with black felt and black front grille
features 2 handles, reinforced protective corners and a speaker adapter
connection via speaker connector or wire clips
dimensions (HxWxD): 69.00 x 47.50 x 43.50 cm

1x DAP Palladium P-1200 Vintage amplifier

The 1,200W version from the popular DAP Audio Palladium high-power amplifier range delivers 2x 400W RMS at 8 ohms, 2x 600W RMS at 4 ohms or 1,200W RMS bridged.

Product features

19-inch rack size	2U
2-ohm compatible	no
Audio loop output	no
Bridge mode	yes
Input	jack (6.3 mm), XLR
Built-in filter	none
Built-in protection	thermal, short circuit, square wave / DC voltage
Built-in DSP processor	no
Cooling	ventilator
Amplifier class	AB
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	22,0 kg
Dimensions (incl. packaging)	60,0 x 60,0 x 20,0 cm

Product specifications

DAP P-1200 amplifier
power @ 8 ohms: 2x 530 watts RMS
power @ 4 ohms: 2x 800 watts RMS
bridge mode: 1200 watts RMS (8 ohms)
frequency range: 20 Hz - 45 kHz (-1 dB)
THD+N: <0.05%
crosstalk: >60 dB (20 Hz - 20 kHz)
S/N-ratio: >105 dB
impedance: 20 kOhms (balanced), 10 kOhms (unbalanced)
safety
- clip limiter
- short circuit
- input / output overload
- DC
- high temperature
- soft start
output mode: stereo/parallel/bridge (switchable)
cooling: fan with two speeds
connectors
- 2x XLR
- 2x jack
- 2x SpeakOn
- 2x terminals (+ en -)
- power
dimensions: 438 x 89 x 430 mm (BxHxD)
weight: 16.26 kg

2x Devine SPE25/10 10-Metre Speaker Cable, 2x2.5mm
This solid Devine SPE25 Series speaker cable offers an excellent price/quality ratio. Thanks to two 2.5mm² conductors and two locking speaker connectors, it's able to guarantee high-quality signal transmission.

Product features

Sustainable product	not specified
Length	10.00 m
Male/female	female - female
Audio connector	lockable speaker connector 4p
Number of cores	2
Conductor diameter	2.5 mm2

Weight and dimensions including packaging

Weight (incl. packaging)	1,2 kg
Dimensions (incl. packaging)	39,0 x 15,0 x 4,5 cm

Product specifications

speaker cable
connector 1: locking speaker connector (4SPP)
connector 2: locking speaker connector (4SPP)
high signal quality
cable type: 2x 2.5mm²
suited for a power of up to 2,000 W (PA)
length: 10m
colour: black

A review can no longer be written about this item