The dB Technologies SA25 is a tripod adapter suitable for the dB Technologies MINIBOX series. This adapter also allows the speakers to be tilted.
Make a pillar of sound when you stack your NXL 24-A speakers on top of your RCF Sub 8004-AS subwoofer with this RCF stacking kit.
This T-adapter plate from Genelec is specifically designed for the 8320, 8330, and 8331 Series studio monitors.
RCF StackKit NXL 44-A to stack 2 units of RCF NX L44 active full range speakers on an RCF SUB of your choice.
Use this pole mount kit by RCF to mount an NXL 24-A satellite speaker to an 8004-AS subwoofer. The two stand adapters are suited for M20 stand flanges.
DB Technologies developed a stand adapter specifically for their DVA Mini modules - the DSA-M2A.
Microphone stand adapter for mounting L, M and K series speakers by dB Technologies on any standard microphone stand. This SN 130 adapter tilts vertically.
The DSA-4 pole mount adapter is suited for mounting up to three DVA T4 modules on a single speaker stand. With this device, dB Technologies makes it possible to use the DVA T4 modules for smaller setups too.
This Yamaha BBS251 truss clamp is specifically for mounting the MSR400 and MSR100 to a truss. It is black and has a weight capacity of 20 kilos.
The Doughty T51100 is an aluminium speaker adapter with a 35mm diameter spigot. Suitable for 32mm (1¼") or 38mm (1½") tripod tubes. A robust and reliable solution for mounting speakers.
The Konig & Meyer 24521 Reducer Flange is compatible with all K&M-made 35mm speaker stands and features an M10 x 12mm threaded bolt and a large, comfortable knob.
This is a Konig & Meyer 19670 tilt adapter for speaker stand - black.
Add an extra 30cm to your speaker or light stand with the Konig & Meyer 21322 extension. This 35mm extension tube comes with M10 screw thread (male/female) at either end and is compatible with the K&M 21300.
The Konig & Meyer 195/8 is a slip-on speaker adapter for stands with a tube diameter of 35 mm. It comes in the colour white and with screw holes for your speakers.
Konig & Meyer 24516 TV pin
The Konig & Meyer 19780 is a white adapter for 35 mm diameter stands. Thanks to this adapter, you can also mount speakers without a built-in flange on a speaker stand or wall bracket.
Konig & Meyer 66350-070-55 connector (black)
Konig & Meyer 24519 TV pin zinc-plated
Black flange adapter to build into your loudspeaker. This adapter has four holes, making it extra secure.
This tripod lens is intended for installation in speakers and can be placed on the 21420 monitor stand or any other tripod with a maximum outer diameter of 25 mm.
Combined with one of K&M's VESA adapters, the Konig & Meyer 19611 stand adapter turns a standard speaker or light stand into a projector screen stand.
This adapter bolt from König & Meyer is specially designed for Penn Elcom's flange adapter where one side has a 35 mm socket and the other side has the M20 thread.
This Konig & Meyer 19780 Inclinable Stand Adapter attaches to a speaker so you can then easily place it on a tripod, with adjustable angle up to 30 degrees.
König & Meyer's 21444 adapter sleeve is a smart tool for extending any 35mm speaker stand. It's easy to fit and has been equipped with a special locking screw for maximum security.
This is the perfect item if you would like the stand you already have to be fitted with K&M's special Ring Lock system. This adapter locks speakers onto their stands to prevent annoying vibrations and wobbling.
The Konig & Meyer 24281 35mm flange adapter has been designed specifically to be mounted at the bottom of a speaker that doesn't have a 35mm stand flange.
This slip-on speaker stand mounting adapter has a tube diameter of 35 mm.
The Konig & Meyer 21324 adapter has been specifically designed for speaker poles. This M20-threaded adapter is compatible with subwoofer distance rod mounting flanges.
This is the Konig & Meyer 24528 reducer flange female M10.
This top hat is made of aluminium, making it very lightweight. Easy to mount.
Adapter to mount a Stagepas 150M or MSR100 speaker on a stand.
The replacement DAP Clubmate Speaker Top flange is compatible with the DAP Clubmate Speaker. So if the original flange is damaged or lost, it can be easily swapped out.
This tilt adapter was designed specifically for HK Audio's Linear 5 speakers. However, it'll also fit the L Sub 1200 A, L Sub 2000 and the L Sub 2000 A subwoofers.
