You can screw the distance rods that are attached to your speakers onto this base plate. The base plate uses the M20 screw thread connection. The 24116 is extra durable.
This adapter sleeve effortlessly fits speaker stands with a 35 mm tube diameter and, thanks to the Ring Lock system, ensures a secure, vibration-free mounting of your speaker.
The Konig & Meyer 21324 adapter has been specifically designed for speaker poles. This M20-threaded adapter is compatible with subwoofer distance rod mounting flanges.
This slip-on speaker stand mounting adapter has a tube diameter of 35 mm.
Mount the Konig & Meyer 19671 speaker tilt adapter onto your speaker stand or distance rod and place your speaker at a 15-degree angle for enhanced projection.
The Konig & Meyer 24281 35mm flange adapter has been designed specifically to be mounted at the bottom of a speaker that doesn't have a 35mm stand flange.
The Konig & Meyer 19654 35mm flange adapter can be screwed to a speaker and slipped onto a speaker stand.
Konig & Meyer 24521 reducer flange, 3/8-inch x 12 mm
König & Meyer's 21444 adapter sleeve is a smart tool for extending any 35mm speaker stand. It's easy to fit and has been equipped with a special locking screw for maximum security.
This is a Konig & Meyer 21326 speaker stand adapter for 38mm flanges.
This is the Konig & Meyer 24528 reducer flange female M10.
This is a Konig & Meyer 19670 tilt adapter for speaker stand - black.
Specially designed for Bosch/EV flange adapters, this adapter bolt from König & Meyer has a 35mm threaded insert at one end and M20 male screw thread at the other.
Konig & Meyer 24521 reducer flange M10 x 12
This is the perfect item if you would like the stand you already have to be fitted with K&M's special Ring Lock system. This adapter locks speakers onto their stands to prevent annoying vibrations and wobbling.
It is the perfect adapter to adjust the angle of the speaker and optimally direct it at your audience. Moreover, it is fitted with a unique internal locking mechanism so that the speaker won't rotate or resonate.
The Konig & Meyer 19610 multifunctional stand adapter is compatible with 35mm diameter tubes and allows for a -30° to +60° set-up using the fitted clamping system.
This Konig & Meyer 19780 Inclinable Stand Adapter attaches to a speaker so you can then easily place it on a tripod, with adjustable angle up to 30 degrees.
Add an extra 30cm to your speaker or light stand with the Konig & Meyer 21322 extension. This 35mm extension tube comes with M10 screw thread (male/female) at either end and is compatible with the K&M 21300.
Combined with one of K&M's VESA adapters, the Konig & Meyer 19611 stand adapter turns a standard speaker or light stand into a projector screen stand.
This adapter bolt from König & Meyer is specially designed for Penn Elcom's flange adapter where one side has a 35 mm socket and the other side has the M20 thread.
The Konig & Meyer 19780 is a white adapter for 35 mm diameter stands. Thanks to this adapter, you can also mount speakers without a built-in flange on a speaker stand or wall bracket.
The Konig & Meyer 195/8 is a slip-on speaker adapter for stands with a tube diameter of 35 mm. It comes in the colour white and with screw holes for your speakers.
Konig & Meyer 24516 TV pin
Black flange adapter to build into your loudspeaker. This adapter has four holes, making it extra secure.
This tripod lens is intended for installation in speakers and can be placed on the 21420 monitor stand or any other tripod with a maximum outer diameter of 25 mm.
The Konig & Meyer 24521 Reducer Flange is compatible with all K&M-made 35mm speaker stands and features an M10 x 12mm threaded bolt and a large, comfortable knob.
Konig & Meyer 66350-070-55 connector (black)
Konig & Meyer 24519 TV pin zinc-plated
The Konig & Meyer 19683 Adapter can be used to mount a speaker onto a baseplate. Simply screw the M20 bolt into your baseplate before mounting any speaker fitted with a standard 35mm stand flange.
Konig & Meyer 24521 reducer flange M8
