This washer is an official spare part for 211 Series microphone arms.
The Konig & Meyer 18810 keyboard stand and the 18811 extension are very literally made for each other. Add this to your 18810 stand and you're adding a secure shelf for a laptop or extra keyboard.
Konig & Meyer's table clamp is fitted with a 3/8-inch thread connector, but also features 3 inputs for 1/4 and 3/8-inch threaded connectors.
This microphone stand extension adds an extra 130mm to any standard microphone stand and comes with a female 3/8" screw thread at one end and a male 3/8" screw thread at the other.
This is Konig & Meyer 44110 support arm. Two of these arms can be used to mount a keyboard or other heavy chunk of gear to the wall at a 23-degree angle. Bear in mind that it's only compatible with slatwall systems or in combination with the K&M 44060 adapter.
The Konig & Meyer 44060 adapter was specifically designed to mount K&M SpaceWall product holders on a wall. Attach it to a wall by means of three screws, and it's easy to quickly exchange different product holders.
The Konig & Meyer 20005 microphone stand extension has a 3/8-inch screw thread and can be used to lengthen all standard mike stands by an extra 95cm.
Designed to meet the VESA MIS -D 75/100mm standard, the König & Meyer 19615 Adapter Plate can be used to mount a range of equipment onto a wall or ceiling and can be combined with K&M 24471, 24496 and 19780 wall mounts and stand adapters.
This stacker (two arms) can be mounted onto a 18950 or 18953 keyboard stand, greatly expanding its functionality. It allows you to easy use an extra keyboard or a laptop, for instance.
This universal table clamp features a 3/8 inch mounting point for securing a wide array of short stands and accessories, while the threaded bolt can tilt four ways to fit less flat desktops and is tightened via a comfy wing-nut.
Thanks to the K&M 21231 microphone boom pole you won't have to miss another word. This practical two-part telescopic microphone arm gives you a larger range for better recordings.
Clean up cables and complete a neat workstation by adding the König & Meyer 18808 cable management system to your Omega keyboard stand. This plate-steel 'box' is easily installed with just two screws.
Made from aluminium and finished with a durable scratch-resistant coating, the König & Meyer monitor plate measures 245cm by 205mm and is compatible with mid-size studio monitors.
Screw the Konig & Meyer 24357 adapter plate to the back of your speaker before securing the whole thing to a compatible wall mount for a clean set-up.
The Konig & Meyer 23721 5/8" threaded bolt is specially designed to expand the functionality of a 23720 or 23723 model table clamp. By adding this bolt, you can even mount a microphone with matching a 5/8" screw thread.
Combined with a compatible wall bracket, the Konig & Meyer 24358 Adapter Panel 5 can be used to securely mount a studio monitor onto a wall.
Konig & Meyer's 18817 is a universal holder for keyboard stands. It has a 3/8-inch screw thread that allows you to attach items like a boom arm, an iPad holder or a sheet music stand, for instance.
Konig & Meyer's 18819 controller tray is designed for use with the 18811 Stacker to give you more space for things like synthesizers, controllers and drum machines.
Pre-drilled with an M20 mounting hole, the Konig & Meyer 26700 is a solid and stable base plate made from moulded zinc and finished with protective felt strips.
This base stand is perfect for fixed installations and/or creating your own microphone stands. Thanks to the 3/8-inch thread, you can screw a microphone clip or arm directly onto it.
This separate set of arms allows you to replace your worn keyboard arm or to place an additional keyboard (or other device) on the Spider Pro.
The Konig & Meyer 26007 microphone stand tube combination is extra-long and therefore perfect for specific recording techniques and antenna set-ups.
The Konig & Meyer 12152 mouse holder can be secured to tubes measuring up to 30mm in diameter and comes complete with a mouse mat.
With this handy replacement screw, you don't have to buy an entirely new K&M stand. The screw is fitted for stands 21336, 21337 and 195/8.
Simply install this adapter plate on the rear of any compatible speaker so it can be secured to a speaker bracket before being mounted on a wall.
Use it to neatly mount a tabletop microphone stand on the wall and clear some desk space. The Konig & Meyer 23856 bracket has a solid design and is compatible with K&M 23840, 23850, 23860 and 23865 microphone arms.
Got a Konig & Meyer 18950 or 19853 keyboard stand that you've already expanded with the K&M 18952 and now want to upgrade with the K&M 18817 universal holder? In that case, you'll need this purpose-designed keyboard stand adapter.
This extension pole fits on K&M's 18868 laptop holder, which in turn fits the Baby Spider Pro or Spider Pro, allowing you to expand your keyboard stand.
Add another tier to your 18940 or 18990 K&M keyboard stand with their practical 18941 Stacker (black). It can be adjusted to fit any keyboard and offers plenty of room and grip.
The ultra-short K&M 21431 mini boom arm can be used to solve an array of stage and studio problems. Finished with a 3/8 inch and 5/8 inch screw thread, this arm can be deployed to mike-up the overheads and amps with ease.
With this complete set of four magnetic clips, any metal music stand can be adapted to serve as a tablet holder. Simply clip each magnet onto a corner of your tablet and stick it to the music rest.
Do you have a K&M 21436 or similar tripod, and are you missing the floor cap of one of the legs? The Konig & Meyer 22948 is the replacement floor cap!
K&M's 18805 lectern can be mounted on keyboard stands 18950, 18953 and 18810 Omega with the included 18817 holder. Ideal for a compact keyboard setup.
This sturdy cable box keeps cables and sockets at your confidence monitor stand organised and out of sight.
The Konig & Meyer 18811 Stacker is literally made to complete your Konig & Meyer 18810 Omega keyboard stand. Add this stand extension and you're adding a secure shelf for a laptop or extra keyboard.
The Konig & Meyer 18822 Stacker gives you the option to place a third keyboard on a K&M Omega keyboard stand. It's easy to mount and can be set to the right height via spring-loaded knobs.
The Konig & Meyer 18803 is a platform for the Omega system. Useful as a table for DJs, as a gear table for keyboardists, or whatever. Your imagination is given free rein!
Table flange for the K&M 23840, 23850 and 23860 broadcast stand. Black, 61mm tall. Stable base for a studio microphone.
The perfect base for numerous large monitors or several smaller monitor speakers. This medium-size plate of the 26792 series is 320 by 280 millimetres.
Simply by by adding the K&M 18824 Controller to the 18822 Stacker, you have room for a synth, drum pad or controller in addition to your keyboards.
This short microphone boom pole is great to bring with you in case you need it. Very stable and securely fastened thanks to an ergonomic fastening knob.
This is the biggest of the 26792 series of monitor speaker platforms. As it is so large, you can use it for a single big monitor speaker or several small ones. The included spikes and rubber caps prevent unwanted vibrations.
Filters
Filters