Stand Parts

Innox 10112

The Innox 10112 is a tube clamp suitable for the IVA MON-02 tripod.

Innox Flexic G 3-Way Coupler

Innox's Flexic Series includes a range of tubes, ready-made frames, shelves, couplers, wheels, and brackets that can be combined into a modular stand-based system that can support keyboards, synths, drum computers and even DJ gear!

Innox 10113 Feet and Mounting Hardware for Innox IGS 33, IGS 55 and IGS 77

The Innox 10113 hardware pack includes four anti-slip feet plus mounting hardware for the Innox IGS 33, IGS 55 and IGS 77 stands.

Fazley 11798 Leg for Innox PB 20B

Innox U-CLIP Cable Routing Clips (Pack of 10)

Stick a few of these Innox U-CLIP cable clips onto a microphone stand to neatly guide the XLR cable to the floor and keep it out of the way. This pack includes ten clips.

Innox IVA MON-06 300x300 Studio Monitor Adapter Plate

The Innox 30 x 30cm adapter plate comes fitted with a 35mm stand adapter for mounting larger monitors and PA speakers. This adapter can be used as a replacement top plate for a set of monitor or PA stands. 

Innox MQRL-01 Quick-Connect Microphone Adapter

Quickly and easily mount and remove a microphone from a stand with the help of the neat Innox MQRL-01 Quick-Connect adapter and quit having to hunt for the right adapter ring every time you swap out mics.

Konig & Meyer 26004 knurled washer

Konig & Meyer 26004 knurled washer.

Innox FlexBooth P200-BK Black Panels for FlexBooth 200

The Innox FlexBooth 200 is a modular, mobile DJ booth that comes as a metal frame that can be then be fitted with these P200 panels for a fully customised, highly personal DJ act.

Innox FlexBooth P200-WH White Panels for FlexBooth 200

The Innox FlexBooth 200 is a modular, mobile DJ booth that comes as a metal frame that can be then be fitted with these P200 panels for a fully customised, highly personal DJ act.

Innox FlexBooth P100-BK Black Panels for FlexBooth 100

With these four black panels designed for the Innox FlexBooth 100, you can easily give shape to a professional-looking DJ act.

Gravity XSP 1023S Screw Pack with Washers and Nuts

The Gravity XSP 1023S spare hardware pack includes the bolts, nuts and washers needed to secure a Gravity speaker stand.

Gravity XSP 1016S Speaker Stand Height Adjustment Clamp Set

The Gravity XSP 1016S Replacement Clamp Set is compatible with various Gravity-designed speaker stands and includes the clamps needed to adjust the height of your stand.

Gravity XSP 1359 Rubber Foot for Guitar Stand

With the Gravity XSP 1359, you have a rubber foot that fits the tripod leg of a Gravity guitar stand, such as the GS 01 NHB. This rubber foot serves as a spare part and comes with a ring.

Gravity XSP 1012 Boom Arm Tightening Screw

The Gravity XSP 1012 is a rod arm swivel head spare part. Combined with the XSP 1014S rod arm hub, the XSP 1012 allows you to mount a rod arm on a Gravity microphone stand.

Gravity XSP 1080 Support Joint Set For Sheet Music Stand

The Gravity XSP 1080 refers to a set of spare parts that make up the support joint that couples the music sheet to the stand. This set comes complete with set screws, washers and other parts.

Shure A26X desk stand extension tube

The Shure A26X is an extension tube for table stands. It is also fit for mounting the Beta 56 on various holders.

Konig & Meyer 24358 Adapter Panel 5, black

Adapter panel 5 by Konig & Meyer lets you mount your speaker vertically. Then you can safely hang the speaker on the wall bracket by connecting it to this panel. This way, you can hang your speakers neatly.

Konig & Meyer 44060 adapter for product holder

The Konig & Meyer 44060 adapter was specifically designed to mount K&M SpaceWall product holders on a wall. Attach it to a wall by means of three screws, and it's easy to quickly exchange different product holders.

Gravity XSP 1028 Anti-Slip Keyboard Stand Sleeves

These Gravity XSP 1028 keyboard stand sleeves come finished in bright green and keep your keyboard from shifting. This is a pack of 4.

Innox FlexBooth P100-WH White Panels for FlexBooth 100

With these four black panels designed for the Innox FlexBooth 100, you can easily give shape to a professional-looking DJ act.

Konig & Meyer 22948 vloerdop voor o.a. K&M 21436

Do you have a K&M 21436 or similar tripod, and are you missing the floor cap of one of the legs? The Konig & Meyer 22948 is the replacement floor cap!

Konig & Meyer 211 boom arm for microphone stand - black

This is Konig & Meyer's 211 boom arm for microphone stand - black.

Konig & Meyer 18872 extension pedal for Spider Pro

<p>This extension pole fits on K&amp;M's 18868 laptop holder, which in turn fits the Baby Spider Pro or Spider Pro, allowing you to expand your keyboard stand.</p>