If the handle of your Gravity SP 4722 or similar speaker stand is damaged, you can replace it with this Gravity XSP 1368 spare part.
The Gravity XSP 1367 is a set screw with plastic knob and green coloured ring that allows you to attach the base to a Gravity speaker stand. This is a spare part for the Gravity SP 4722.
The Gravity XSP 1080 refers to a set of spare parts that make up the support joint that couples the music sheet to the stand. This set comes complete with set screws, washers and other parts.
The Manhasset 1420 Dual-Peg Adapter is a coupler for attaching two wind instrument stands to your Manhasset 48 sheet music stand. You need the separately available Manhasset 1400 base element for this.
The Gravity XSP 1056 refers to a set of screws that you can use to assemble a Gravity VARI-G guitar rack. This is a set of spare parts consisting of screws and washers.
With the Gravity XSP 1081, you are provided with a clamp that serves as a spare for the Gravity NS 411 sheet music stand, or for the Gravity LS TBTV 17 light stand.
With the Gravity XSP 1035, you have an M8 set screw that serves as a spare part for Gravity speaker stand adapters. The knob on the set screw is fitted with a green coloured ring.
The Gravity XSP 1072 concerns the base of a Gravity Vari-Poly tripod. It is a spare part. The foot has a diameter of 85 millimetres.
The Gravity XSP 1011 is a single rubber foot fitted with a replaceable green coloured ring. This is a spare part for Gravity microphone stands equipped with a tripod base.
The Gravity XSP 1061 is a set of optional spikes that you can attach to the underside of a Gravity monitor stand, such as the Gravity SP 3202. This prevents the tripod from sliding on slippery surfaces.
Use the Gravity XSP 1363 to replace a lost or worn rubber base on your Gravity speaker stand, such as the Gravity SP 4722. This is a rubber base including a green coloured ring.
The Gravity GTLSP431 is a strong touring spacer rod with automatic LockPin® locking. Suitable for the GTLS431B, GLS431B and GLS331B with a maximum height of 2.4 metres.
The Gravity XSP 1043 is a set of rubber washers that serve as a spare part for Gravity microphone stands with a 2-point rod arm system.
If the rubber base of a Gravity speaker stand is worn out or lost, you can replace it with the Gravity XSP 1020. This foot features a coloured ring.
Compatible with any Gravity microphone stand fitted with a boom arm, the replacement Gravity XSP 1014S Swivel Arm Hub has a two-point adjustment system so both the angle and length of the boom arm can be accurately set up.
The Gravity XSP 1013S is a spare part for Gravity swing-arm microphone stands. It is a 1-point adjustable hub into which a swivel arm can be attached.
The Gravity XSP 1028 is a set of 4 black-coloured sleeves suitable for Gravity keyboard stands. These spares prevent the keyboard from shifting on the tripod.
With the Gravity XSP 1027S, you have a complete kit consisting of spare parts that allow you to adjust the height of a Gravity keyboard stand.
The Gravity XSP 1031 Replacement Tensioning Screw is needed to mount the height adjustment lever of your Gravity MS 4321 microphone stand. Also compatible with similar Gravity mic stands.
Add the 13.3 inch Analog Cases XTS Flex Tray to your Analog Cases XTS Stand Small and expand the setup to support two to three effect pedals or even a small synthesizer.
The Gravity XSP 10001 is a spare part for Gravity microphone stands. It is the main bushing including clutch for the MS 231 and similar models.
The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
The Manhasset 1430 Piccolo Peg is fully compatible with Manhasset's wind instrument stand. Slot it on to complete a neat and secure piccolo stand.
The Gravity XSP 1371 adjustment screw is part of the wind-up mechanism of the Gravity SP 4722 speaker stand as well as that of various similar stands. This replacement part comes fitted with a green ring.
Loose Gibraltar GEMS-TTOP top T-section for laptop/mixer stand: 18" downtube (1") with 1.5" top section for mounting brackets on racks or tripod bases.
Practical accessory with velour lining and lightweight - ideal for drummers.
Compact, stylish drum stool with black velvet upholstery for comfortable drumming in any setting.
The Rycote Cyclone Adaptor is a connection system to integrate your existing Rycote Cyclone windshield kit with the PCS-Boom connector. It has a holder for an XLR cable that can rotate 360 degrees.
This pack of four RS RockStand 20869 wheels are compatible with all RockStand-designed modular guitar stands and each comes equipped with a brake.
Easily installed, the Manhasset 1100 music stand add-on provides a shelf for storing your essential accessories, placing them within easy reach.
With this bar block from Manhasset, you can store up to 34 kg of scores and accessories on your music stand! Ideal for long performances or very heavy music.
The Manhasset 1450 Clarinet Peg is a stand for a clarinet. This attachment requires the separately available Manhasset 1400 base element.
The Manhasset 1480 Trumpet / Cornet Peg is a stand for a trumpet or cornet. This attachment requires the separately available Manhasset 1400 base element.
Get this Adam Adapter Plate to secure your Adam S-Series studio monitor neatly to a wall or ceiling.
The Gravity XSP 1001 is a spare part for Gravity microphone stands. The XSP 1001 is a microphone clamp and boom holder with a diameter of 16 millimetres.
The Gravity XSP 1003 quick-lock allows you to swiftly adjust the boom arm length of a Gravity microphone stand.
The Gravity XSP 1004S is a spare part for Gravity microphone stands equipped with a tripod base. With this tripod base kit, you can replace a damaged tripod at an economical price!
The Gravity XSP 1005 is a set of 3 tripod leg mounts. These are spare parts for Gravity microphone stands equipped with a tripod base.
The Gravity XSP 1010 replacement boom arm counterweight is compatible with various Gravity-designed boom arm microphone stands.
The Gravity XSP 1015 replaces the worn or broken collar of your Gravity speaker tripod. This collar concerns the coupling piece between the tripod's legs and the tripod.
The Gravity XSP 1017S is a spare part for a Gravity speaker stand, specifically a speaker leg brace set complete with bolt, nut and washer so you can easily replace a broken support.
With the Gravity XSP 1018, you have a spare part for Gravity speaker stands. The XSP 1080 concerns a plug that allows you to cover the tube of the stand.
The Gravity XSP 1021 is a spare part for Gravity speaker stands. This is a rubber ring that you can attach around the tube of the stand and which holds the safety pin.
The Gravity XSP 1024 is a set of 4 plugs that allow you to plug shut the support tubes of a Gravity keyboard stand. The XSP 1024 is compatible with 28-millimetre diameter tubes.
If your Gravity keyboard stand's rubber feet are worn out or lost, you can replace them with this Gravity XSP 1026 rubber foot. This is a single foot only.
The Gravity XSP 1037S is a spare part for Gravity speaker stands equipped with a tripod.
