Stand Parts

(B-Stock) Innox FlexBooth P100-BK Black Panels for FlexBooth 100

With these four black panels designed for the Innox FlexBooth 100, you can easily give shape to a professional-looking DJ act.

(B-Stock) 18822 Stacker Extension for Omega 18820 Stand

The Konig & Meyer 18822 Stacker gives you the option to place a third keyboard on a K&M Omega keyboard stand. It's easy to mount and can be set to the right height via spring-loaded knobs.

(B-Stock) Innox 11807 Leg for Innox PB 40W Piano Bench

(B-Stock) 18828 Omega Table Stand Support

The König & Meyer 18828 has been designed to turn the K&M Stacker 18811 into a fully-fledged keyboard stand in no time. The width of the stand can be set to one of five settings between 526mm and 770mm.

Gravity GTLSP431 Touring distance rod for GTLS431B / GLS431B / GLS Touring remote rod for light and sound systems

The Gravity GTLSP431 is a strong touring spacer rod with automatic LockPin® locking. Suitable for the GTLS431B, GLS431B and GLS331B with a maximum height of 2.4 metres.

Gravity GMATRAY3 Tiltable Traveler Tray Tiltable traveler tray for stands

The Gravity GMATRAY3 tiltable traveller tray is an ergonomic design for travelling. It can be easily clamped onto tripods and is tiltable up to 180°. Ideal for placing small items such as your smartphone or

Gravity GMATE01 Traveler extension Extension for Traveler tripods

The Gravity GMATE01 is a handy extension for the Traveler series. Extend your tripods by 100 mm for extra flexibility. Suitable for almost all Traveler products.

Gravity GCARTL01AC1SET1 Rapid Desk for CART L 01 B incl. bars Accessory set for CART L 01 B

The Gravity GCARTL01AC1SET1 upgrades your CART L 01 B to a mobile desk. The set includes the Rapid Desk and rods, easy to assemble and quickly ready for use.

Wittner 963061 Music Stand Shelf Extender

This practical solution for extending your music stand is 46 x 7.5 centimetres. It's incredibly easy to attach and to remove.

Gravity SA CC 35 B Speaker Stand Cable Clips

Tighten up any PA system with this set of Gravity SA CC 35 B cables clips. Simply clip them onto the speaker stands and route any power and speaker cables through to neaten up the venue floor.

Gravity RP 5555 universal ring pack, black

The Gravity RP 5555 is a universal ring pack for all Gravity customisable products. Each set contains 20 rings in 4 different sizes (15 mm, 20 mm, 25 mm, 30 mm). This is the black variant.

Gravity XSP 1062 Counter Nut for 3/8-inch Microphone Stands

The Gravity XSP 1062 Counter Nut can be used to re-fit a Gravity microphone stand with a 3/8 inch screw threaded mounting point and is made from aluminium.

Gravity MS TM 1 B Microphone Desk-Clamp

The Gravity MSTM1B conveniently clamps to the edge of a desk, table, or stage, via a simple screw-on-system, and comes fitted with a standard 3/8" threaded screw that can take any compatible microphone or gooseneck.

Gravity WB 123 WPB Baseplate Weight Plate

Add it to the Gravity WB 123 B M20 baseplate and the 5 kilogram, cast iron Gravity WB 123 WPB weight plate ensures maximum stability.

Gravity SP VARI-LEG 01 Foot with Spirit Level for Speaker/Lighting Stand

The Gravity SP VARI-LEG 01 concerns an extremely handy accessory for owners of speaker stands and/or lighting stands. This is because this leg allows you to compensate for uneven surfaces, steps, staircases and more!

RockStand RS 20869 WRENCH Spare Mounting Tool for Modular Stands

The RS 20869 WRENCH is a spare tool for installing, adjusting and expanding RockStand's modular guitar stands. When you order such a modular stand, one installation tool is included.

ADJ FS Pan Glide pan head for spotlight

With the American DJ FS Pan Glide, you provide your tripod with a good smooth pivot. This is essential with a follow spotlight. After all, every little hitch is extremely magnified when the light beam shines onto the stage.

Omnitronic BOOZ Event Stand Bag padded carrier bag

Padded carry bag for the OMNITRONIC BOOZ Event Stand, with two handles and two shoulder straps for easy transport.

Gravity GBGSBL1 Sandbag large with lugs for tripods, for filling Sandbag for tripods, with loops

The Gravity GBGSBL1 is a sturdy sand bag for tripods, which can be filled with sand, gravel or other material as desired. Made of water-repellent nylon with non-slip underside.

Pearl PJ-83L pipe joint 830 series

Gibraltar Hardware 77TABLE Workstation Table Top

Handy Gibraltar 77TABLE storage table (15 x 18 inches) with 5/8-inch tube holder for your laptop, mixer or other electronics; ideal for studio, stage and podcasting.

Gibraltar Hardware GEMS-TTOP Laptop / Mixer Stand Top Section

Loose Gibraltar GEMS-TTOP top T-section for laptop/mixer stand: 18" downtube (1") with 1.5" top section for mounting brackets on racks or tripod bases.

RockStand RS 20869 SPACER Modular Stand Spacer Pack

Customise the setup of a modular RockStand guitar stand with this pack of six spacers. Coupled with the range of available add-ons, these modular stands offer jobbing musicians near-limitless storage options.

Accu-Stand Pro Event Table Corner shelf (Pack of 2)

This Accu-Stand pack includes two aluminium corner shelves that can be added to your Pro Event or Pro Event II booth.