Fluid Audio Image 1 3-way studio monitor, black (each)
Fluid Audio
Bargain Buy
Specifications
Product features
- Sustainable product
- Not specified
- Active or passive
- Active
- Tweeter diameter
- Not specified
- Mid driver diameter
- 4 inch
- Woofer diameter
- 2 x 6.5 inch
- Coaxial
- No
- Monitor set configuration
- Single speaker
- Maximum frequency
- 20 - 20.9 kHz
- Minimum frequency
- 40 - 49 Hz
- RMS power in watts
- 350 - 499 W
- Speaker connections
- XLR input, digital input, digital output / thru
- Type of studio monitor
- 3-way (tweeter + midrange + woofer)
- Bass reflex system
- No bass reflex system
- Internal calibration
- No
Weight and dimensions including packaging
- Weight
- 11,5 kg
- Dimensions
- 42,0 x 33,0 x 30,0 cm
Product specifications
- Contents: 1x Fluid Audio Image 1 studio monitor
- Type: 3-way active reference monitor
- Colour: black
- Max SPL: 108 dB
- Sensitivity: 87 dB @ 1 metre with -15 dBv input (level control set to 0 dB)
- Frequency response: ±4.6 dB 40 Hz – 20 kHz
- Frequency response: ±2.0 dB 80 Hz – 20 kHz
- Bass response: -3 dB @ 45 Hz
- Bass filter Q: 0.707
- Bass filter slope: 24 dB/oct
- Crossover frequencies: 190 Hz / 3,000 Hz (via on-board DSP)
- Tweeter: AMT (Air Motion Transformer) 66 x 66 x 27 mm
- Midrange: 4-inch aluminium cone
- midrange motor: low-distortion motor with shorting ring
- woofers: dual 6.5-inch paper cone woofers
- woofer excursion: +/-5.0 mm linear excursion
- HF amplifier power: 75 W RMS
- Midrange amplifier power: 100 W RMS
- LF amplifier power: 150 W x 2 RMS
- Total amplifier power: 475 W per monitor
- Controls: input level stepped attenuator
- Input impedance: 20 kΩ (balanced XLR)
- Signal processing: room correction file upload
- Signal processing: SoundID reference profile support
- Signal processing: Cubemix mode via DCT software
- Audio inputs: analogue XLR
- Digital connection: AES/EBU input and thru
- Acoustic controls: rear-panel EQ adjustments
- Enclosure: 14.5 litres total internal volume
- Enclosure: sealed woofer and midrange enclosures
- Mains voltage: 100–120 VAC or 220–240 VAC (switch set at factory)
- Power consumption: 3 W (idle) / 650 W (maximum)
- Weight (net): 21.8 lbs (9.9 kg) per unit
- Shipping weight: 28.2 lbs (12.8 kg) per unit
- Dimensions (product): 8.11 x 12.13 x 12.13 inches (206 x 308 x 308 mm)
- Dimensions (shipping): 17.24 x 13.19 x 17.83 inches (438 x 335 x 453 mm)
Recommended price £1,387
-14%
£1,199
incl. 20% VAT
Online stock status:
Order now and receive delivery within approx. 3 weeks
£59.95 one-time fee
Specifications
Product features
- Sustainable product
- Not specified
- Active or passive
- Active
- Tweeter diameter
- Not specified
- Mid driver diameter
- 4 inch
- Woofer diameter
- 2 x 6.5 inch
- Coaxial
- No
- Monitor set configuration
- Single speaker
- Maximum frequency
- 20 - 20.9 kHz
- Minimum frequency
- 40 - 49 Hz
- RMS power in watts
- 350 - 499 W
- Speaker connections
- XLR input, digital input, digital output / thru
- Type of studio monitor
- 3-way (tweeter + midrange + woofer)
- Bass reflex system
- No bass reflex system
- Internal calibration
- No
Weight and dimensions including packaging
- Weight
- 11,5 kg
- Dimensions
- 42,0 x 33,0 x 30,0 cm
Product specifications
- Contents: 1x Fluid Audio Image 1 studio monitor
- Type: 3-way active reference monitor
- Colour: black
- Max SPL: 108 dB
- Sensitivity: 87 dB @ 1 metre with -15 dBv input (level control set to 0 dB)
- Frequency response: ±4.6 dB 40 Hz – 20 kHz
- Frequency response: ±2.0 dB 80 Hz – 20 kHz
- Bass response: -3 dB @ 45 Hz
- Bass filter Q: 0.707
- Bass filter slope: 24 dB/oct
- Crossover frequencies: 190 Hz / 3,000 Hz (via on-board DSP)
- Tweeter: AMT (Air Motion Transformer) 66 x 66 x 27 mm
- Midrange: 4-inch aluminium cone
- midrange motor: low-distortion motor with shorting ring
- woofers: dual 6.5-inch paper cone woofers
- woofer excursion: +/-5.0 mm linear excursion
- HF amplifier power: 75 W RMS
- Midrange amplifier power: 100 W RMS
- LF amplifier power: 150 W x 2 RMS
- Total amplifier power: 475 W per monitor
- Controls: input level stepped attenuator
- Input impedance: 20 kΩ (balanced XLR)
- Signal processing: room correction file upload
- Signal processing: SoundID reference profile support
- Signal processing: Cubemix mode via DCT software
- Audio inputs: analogue XLR
- Digital connection: AES/EBU input and thru
- Acoustic controls: rear-panel EQ adjustments
- Enclosure: 14.5 litres total internal volume
- Enclosure: sealed woofer and midrange enclosures
- Mains voltage: 100–120 VAC or 220–240 VAC (switch set at factory)
- Power consumption: 3 W (idle) / 650 W (maximum)
- Weight (net): 21.8 lbs (9.9 kg) per unit
- Shipping weight: 28.2 lbs (12.8 kg) per unit
- Dimensions (product): 8.11 x 12.13 x 12.13 inches (206 x 308 x 308 mm)
- Dimensions (shipping): 17.24 x 13.19 x 17.83 inches (438 x 335 x 453 mm)
Product information
Product no: 9000-0156-7432
General
The Fluid Audio Image 1 is a compact 3-way active studio monitor designed for serious near-field and mid-field applications. Thanks to DSP control with room correction file upload, SoundID Reference profile support and CubeMix mode (via DCT software), you can fine-tune it precisely to your room and workflow. The dual-opposed low-frequency design, featuring two 6.5-inch woofers, delivers a controlled low end, whilst the AMT tweeter and 4-inch midrange ensure detail and definition. Supplied individually.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
There are no reviews for this product yet.
Alternative products by other brands
Search all products in category Studio Monitor-
Bargain Buy -20%Recommended price £2,183 £1,739In stock Order before 10:00pm = receive it on Thursday (free)
-
Bargain Buy -24%Recommended price £1,665 £1,266In stock Order before 10:00pm = receive it on Thursday (free)
-
Bargain Buy -39%Recommended price £365 £223In stock Order before 10:00pm = receive it on Thursday (free)
-
SALE ITEM -20%Recommended price £197 £158In stock Order before 10:00pm = receive it on Thursday (free)
