Prolyte Truss Accessories

25 products have been found
Sort by:
Popu
lar
This Prolyte truss clip allows you to connect different elements of a truss construction to one another. Fit for the CSS6 format.
In stock
In stock
£0.08
Popu
lar
This is a standard X30 series Prolyte pin. To couple two pieces of truss, you need a conical connection and two of these pins.
In stock
In stock
£1.14

This 65 mm truss pin for the X30 series is slightly shorter than a standard pin. It is suited for all truss brands that use the CCS6 coupling system.

In stock
In stock
£4.40
Popu
lar
This coupler is used to connect two trusses from the X30 series together. It can be used on Prolyte’s X30, X30D and X30V, as well as on other truss brands that use the CSS6 coupling system.
In stock
In stock
£5.80
-81%
In stock
In stock
£0.50
-44%
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
In stock
In stock
£17.45
-49%
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
In stock
In stock
£14.90
-46%
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
In stock
In stock
£15.80
The BM-M12X20-IB-CS bolt by Prolyte to mount half-conical connectors to X30D and X30V base plates. Tightening is done by means of a hex key.
In stock
In stock
£1.48
Pin with screw thread for the Prolyte X30 series. To couple two pieces of truss together, you need a conical connection and two of these pins.
In stock
In stock
£2.23
M8 nut for truss pin X30 series. In order to connect two pieces of truss together, you need a conical connection and two truss pins.
In stock
In stock
£1.06
The CCS6-649 half-conical coupler is designed for mounting on base plates from Prolyte's X30 series. It has a CCS6 coupler on one side and an M12 screw thread on the other.
In stock
In stock
£7.65
This half-conical connection has a CCS6 coupling on one end and an M12 screw thread on the other side. Very handy to create a floor or wall plate for the truss.
In stock
In stock
£21.20

This half-conical connector has a CCS6 coupler on one end and an M12 screw thread on the other. It's great if you want to create a bass or wall plate for a truss.

In stock
In stock
£21.80

This half conical coupler has a CCS6 coupler on one side and an M12 screw thread on the other. It is ideal if you want to make a base or wall plate for a truss yourself.

In stock
In stock
£18.85
Bax-shop.co.uk | Christmas Presents