Prolyte Trusses

93 products have been found
Sort by:

This 65 mm truss pin for the X30 series is slightly shorter than a standard pin. It is suited for all truss brands that use the CCS6 coupling system.

In stock
In stock
£4.41
Popu
lar
This is a standard X30 series Prolyte pin. To couple two pieces of truss, you need a conical connection and two of these pins.
In stock
In stock
£1.51
Popu
lar
This base plate is suited for the square X30V truss by Prolyte. You can use it to place a truss on the floor or against a wall.
In stock
In stock
£29.00
Popu
lar

This base plate is suited for the square X30V truss by Prolyte. You can use it to place a truss on the floor or against a wall.

In stock
In stock
£37.00
Popu
lar
This is a high-quality ladder truss with two main tubes that have a diameter of 51 mm. It's suited for fixed as well as mobile applications in the entertainment or promotional industry.
In stock
In stock
£99.00
Popu
lar
This Prolyte truss clip allows you to connect different elements of a truss construction to one another. Fit for the CSS6 format.
In stock
In stock
£0.10
Popu
lar
The X30D by Prolyte is a triangular truss with a high load-taking capacity and a low natural weight. This high-quality truss is fit for mobile as well as fixed installations.
In stock
In stock
£128.00
Popu
lar

The Prolyte X30D is a triangular truss with a high carrying capacity and weighs very little. This high-quality truss is fit for mobile applications as well as for fixed installations in any line of business.

In stock
In stock
£83.00
Popu
lar
Prolyte's X30D is a lightweight triangular truss with a great weight capacity. With such high quality, it's perfect for mobile applications as well as installations for any market segment.
In stock
In stock
£59.00
Popu
lar
Prolyte's X30D is a lightweight triangular truss with an impressive weight capacity. With such high quality, it's perfect for mobile applications as well as installations for any market segment.
In stock
In stock
£113.00
Popu
lar

Square truss with main beams of 51 x 2 mm and diagonals of 16 x 2 mm. The dimensions of the truss are 29 x 29 cm which makes it very compact, yet it has a great load-taking capacity.

In stock
In stock
£106.00
Popu
lar
This is a rectangular truss with 51 x 2mm main tubes and 16 x 2mm braces. With its dimensions of 29 x 29 cm, it's nice and compact but still has a great weight capacity.
In stock
In stock
£77.00
This is a rectangular truss with 51 x 2mm main tubes and 16 x 2mm braces. With its dimensions of 29 x 29 cm, it's nice and compact but still has a great weight capacity. This is a 3-way T-section.
In stock
In stock
£165.00
-27%
In stock
In stock
£578.00
-24%
This kind of truss is often used for mobile applications and features three main tubes that together form a triangle, thus creating a solid construction. This corner has an upward angle of 90 degrees.
In stock
In stock
£93.00
This kind of truss is often used for mobile applications and features three main tubes that together form a triangle, thus creating a solid construction. This corner has an angle of 90 degrees.
Delivered quickly within 4 business days
4 business days
£105.00
M8 nut for truss pin X30 series. In order to connect two pieces of truss together, you need a conical connection and two truss pins.
In stock
In stock
£1.11

This half-conical connector has a CCS6 coupler on one end and an M12 screw thread on the other. It's great if you want to create a bass or wall plate for a truss.

In stock
In stock
£15.95
This half-conical connection has a CCS6 coupling on one end and an M12 screw thread on the other side. Very handy to create a floor or wall plate for the truss.
In stock
In stock
£15.60

This half conical coupler has a CCS6 coupler on one side and an M12 screw thread on the other. It is ideal if you want to make a base or wall plate for a truss yourself.

In stock
In stock
£13.90
In stock
In stock
£51.00
In stock
In stock
£67.00
This is a square truss with 51 x 2mm main tubes and 16 x 2mm braces. With its dimensions of 29 x 29 cm, it's nice and compact but still has a great weight capacity.
In stock
In stock
£124.00
In stock
In stock
£299.00
Prolyte's X30D is a lightweight triangular truss with an impressive weight capacity. With such high quality, it's perfect for mobile applications as well as installations for any market segment.
In stock
In stock
£86.00
This is a high-quality ladder truss with two main tubes that have a diameter of 51 mm. It's suited for fixed as well as mobile applications in the entertainment or promotional industry.
In stock
In stock
£59.00
The CCS6-649 half-conical coupler is designed for mounting on base plates from Prolyte's X30 series. It has a CCS6 coupler on one side and an M12 screw thread on the other.
In stock
In stock
£6.90
Pin with screw thread for the Prolyte X30 series. To couple two pieces of truss together, you need a conical connection and two of these pins.
In stock
In stock
£2.33
The BM-M12X20-IB-CS bolt by Prolyte to mount half-conical connectors to X30D and X30V base plates. Tightening is done by means of a hex key.
In stock
In stock
£0.52
This coupler is used to connect two trusses from the X30 series together. It can be used on Prolyte’s X30, X30D and X30V, as well as on other truss brands that use the CSS6 coupling system.
In stock
In stock
£6.10
This kind of truss is often used for mobile applications and features three main tubes that together form a triangle, thus creating a solid construction. This three-way corner goes downwards and to the right.
In stock
In stock
£154.00
This kind of truss is often used for mobile applications and features three main tubes that together form a triangle, thus creating a solid construction. This is a horizontal, 3-way T-section.
In stock
In stock
£128.00
This is a rectangular truss with 51 x 2mm main tubes and 16 x 2mm braces. With its dimensions of 29 x 29 cm, it's nice and compact but still has a great weight capacity. This corner has an angle of 90 degrees.
In stock
In stock
£127.00
The X30D by Prolyte is often used for mobile applications and features three main tubes that together form a triangle, thus creating a solid construction. This corner has an angle of 90 degrees.
In stock
In stock
£99.00
This truss pin for the X30 series has a neck so that it can be pulled from the truss easily. Ideal for mobile applications where trusses have to be mounted and dismounted often.
Available in 7 business days.
7 business days
£4.60
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£31.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£30.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£29.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£29.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£28.00
A spacer really comes in handy when you want to fit a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£27.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£31.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£29.00
A spacer really comes in handy when you want to place a truss bridge between two walls, for instance. If you need a few extra millimetres, you can place a spacer to create the perfect length.
Available in 7 business days.
7 business days
£28.00
Available in 7 business days.
7 business days
£3.20
Prolyte's X30D is a lightweight triangular truss with an impressive weight capacity. With such high quality, it's perfect for mobile applications as well as installations for any market segment.
Available in 7 business days.
7 business days
£59.00
This is a high-quality ladder truss with two main tubes that have a diameter of 51 mm. It's suited for fixed as well as mobile applications in the entertainment or promotional industry.
Available in 7 business days.
7 business days
£62.00
This is a high-quality ladder truss with two main tubes that have a diameter of 51 mm. It's suited for fixed as well as mobile applications in the entertainment or promotional industry.
Available in 7 business days.
7 business days
£45.00
bax-shop.co.uk | DJ Special | Deals & Discounts